Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Pinehurst
Gate installation in Pinehurst usually means one of two things: a new swing or slide gate on a long private driveway, or a Gate Repair in Pinehurst job that adds a gate opener and keypad to an existing gate so nobody has to get out of the truck in July heat. Most Pinehurst jobs we quote run from $2,800 for a basic single swing gate up to $9,500 for a double gate with automation, battery backup, and safety photocells. We serve Pinehurst from our Dallas-Fort Worth dispatch office with local crews who know the acreage lots and county-road frontages here. Call (626) 649-4572 and a live person answers, any hour.
What sets Pinehurst apart from Conroe or Spring is the land itself. You’re not on a tight subdivision lot. You’re on an acre, maybe several, and the gate sits at the end of a driveway that meets an unimproved county road with an open ditch. That changes how a gate should be installed, and it’s exactly what we plan for on every Pinehurst job.
Why Latch & Post Gate Repair Is Pinehurst’s Preferred Gate Installation Company
We’re part of the Cedarwell family, independently owned and operated, and we’ve been doing gate work since 2009. Cody Beckman leads our team, and he trains every technician on the brands families in Montgomery County actually run: Viking, Ghost Controls, DoorKing, Elite, LiftMaster, and the rest. Our Gate Installation team works only on gates. Not fences, not general contracting. Every gate comes down to two parts, the latch that holds it and the post that carries it. That’s the job we focus on.
Pinehurst customers tend to ask the same questions before we start: what happens to the grass beside the driveway, will the crew clean up, and will the price change after the job begins. Here’s the direct answer. We put down drop cloths and wear shoe covers before we step inside your home. We photograph the cleanup before we leave. And the written price you get before work starts is the price you pay, no exceptions. Every installation is covered by the 365-Day Done Right Promise. If it isn’t right, we make it right.
We also know that many Pinehurst homeowners are in 55+ communities or on acreage they’ve owned for decades. That means quiet operators matter, battery backup matters, and a technician who explains things without talking down matters. Our crews do all three.
Sliding Gate Installation in Pinehurst
Sliding Gate Installation in Pinehurst is the right call when a driveway slopes toward the gate, or when the gate would swing out across a county road ditch during the wet season. A slide gate travels sideways along a track instead of arcing open, so it needs a flat run of fence line, about one and a half times the gate opening. On Pinehurst acreage lots where the driveway runs parallel to a drainage ditch, this is often the better choice than a swing gate that would need a raised hinge post right at the water’s edge. A single sliding gate with manual operation starts around $3,200 here. Add an operator, keypad, and photocells and you’re typically at $4,800 to $6,500.
Track and Foundation Work for Sliding Gates
Slide gates fail fast in Pinehurst if the track sits low and water pools around it. We pour a concrete track bed with a slight crown so rain sheets off instead of standing. The motor sits on a raised concrete pad, not down in the grass, which keeps the control board dry through our 55-plus inches of annual rainfall.
Cantilever Slide Gates for Ditch-Front Driveways
If your driveway meets an unimproved county road with an open ditch and there’s no clean track line, a cantilever slide gate makes sense. The gate rides on rollers above the ground instead of through it, which means no track to clog with mud after a Montgomery County downpour. These run higher, usually $5,000 to $7,500 installed with automation, but they hold up far better on ditch-front lots.
Gate Opener Installation in Pinehurst
Gate Opener Installation in Pinehurst typically means adding an automated operator to an existing gate so you can open it from the car, the house, or a keypad without stepping outside. Most Pinehurst homeowners have a welded tubular steel pipe gate already hung on concrete-set posts. The posts may be sound, the gate may swing fine, but the family wants an opener, a remote, and a keypad. A new operator installation runs $1,800 to $3,400 depending on the operator brand and whether we’re adding safety photocells, a battery backup, or a vehicle exit sensor. You’ll see the full number in writing before we order any parts.
Battery Backup for 55+ Residents
Pinehurst has a large retirement and 55+ community presence. A power cut in July shouldn’t leave anyone stuck inside their own driveway. We install battery backup units that keep the gate operating through short outages, and we recommend them on every automated gate for Pinehurst customers. The add-on is usually $400 to $700, and it’s one of the few upgrades we think every automated gate here should have.
Keypads, Remotes, and Quiet Operators
We set up outdoor keypads with codes you choose, remotes that clip to a sun visor, and operators from Viking, Ghost Controls, and DoorKing with soft-start and soft-stop motors. On a quiet acre off a rural Pinehurst drive, a loud chain-drive operator is a nuisance. The belt and screw options we install run noticeably quieter, which matters when the gate is 200 feet from the house but the neighbors are a mile off. They hear everything out here.
Trusted Brands We Service in Pinehurst
Our technicians are factory-trained on the operators Pinehurst homes actually have. That includes Viking, Ghost Controls, DoorKing, and Elite, along with LiftMaster, FAAC, BFT, Linear, and Mighty Mule. We keep common parts for these brands stocked on our service vehicles, which means most Pinehurst gate opener installations and repairs happen in a single visit rather than waiting on a back-ordered board. When an Elite swing opener on a horse-property gate needs a new control board, we’d rather have it on the truck than tell you it’s a week out.
Common Gate Installation Problems We See in Pinehurst Homes
- Gate posts heaved out of plumb by Lufkin-series clay. The clay here swells when wet and shrinks when dry, and over a season it pushes a hinge post out of vertical. The gate starts dragging, the opener strains, and eventually the motor burns out.
- Standing water at post footings on county-road frontages. After heavy rain, ditch overflow pools around post bases on properties that front unimproved roads. The concrete stays saturated, the footing shifts, and low-voltage wiring rots. A new gate won’t fix this. The footing and drainage have to be corrected first.
- Rusted frames and corroded boards from humidity and heat. Southeast Texas summers push 95°F and the humidity never lets up. Unpainted steel frames rust through, and control boards, keypads, and battery units corrode faster than in drier climates. We coat or specify powder-coated frames and mount electronics in weatherproof enclosures.
- Operators undersized for long, heavy pipe gates. A 16-foot welded tubular gate that’s been swinging on old hinges is a lot of mass. Install an operator rated for half that weight and it will fail. We size the opener to the actual gate, not the brochure.
Pricing for Gate Installation in Pinehurst, TX
Here are the numbers we quote most often in Pinehurst. A manual single swing gate runs $2,800 to $4,200. A double swing gate with an operator and keypad typically lands between $6,000 and $9,500. Sliding gate installations start around $3,200 manual and $4,800 automated. Gate opener installation on an existing gate runs $1,800 to $3,400, with battery backup adding $400 to $700. The price depends on gate width, whether posts need to be re-set in corrected footings, and the operator brand. Every Pinehurst estimate is free and in writing before any work begins. Call (626) 649-4572 for your number.
We Also Serve Cities Near Pinehurst
If you’re outside Pinehurst but nearby, we also handle gate installation in Pinehurst‘s neighboring communities. Our crews serve Tomball, Conroe, Spring, and Willis with the same written pricing, cleanup routine, and 365-Day Done Right Promise on every job.
Serving Pinehurst, TX - Our Local Coverage Area
We’re based in the Pinehurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Pinehurst
The Lufkin-series clay under Pinehurst expands when it absorbs rain and contracts during dry spells, and that seasonal movement slowly pushes gate post footings out of vertical. Homes on acreage lots fronting unimproved county roads also deal with ditch overflow pooling around post bases, which saturates the soil and accelerates the lean. A gate that drags on the latch side or an opener that grinds is usually a post problem, not a panel problem. We correct the footing and drainage before hanging anything new. Call (626) 649-4572 for an exact quote, estimates are free.
Yes. We install battery backup units that keep the gate operating during short power outages, and we recommend them on every automated gate in Pinehurst because of the area’s large 55+ population. The backup sits in a weatherproof enclosure near the operator and recharges automatically when power returns. Add $400 to $700 to an opener installation and you’ll have a gate that doesn’t trap anyone when the lines go down. Call (626) 649-4572 for a written quote.
An automatic gate in Pinehurst needs at least two independent entrapment protection systems: safety photocells across the gate opening and an inherent reversing mechanism in the operator itself. Photocells detect a child, pet, or vehicle in the gate path and stop or reverse the panel before contact. We install and align the photocells on every automated job, and we test the reverse pressure in front of you before we leave.
Yes. Many Pinehurst homeowners leave for extended periods, and we set up gates so they keep working without daily attention. That means battery backup, a robust operator from a brand like DoorKing or Viking, and photocells that don’t drift out of alignment. If something does fail while you’re away, a live person answers our phone 24/7 and we can coordinate access with a neighbor or property manager. Call (626) 649-4572 to talk through your setup.
We service and install LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Pinehurst’s long pipe gates and rural driveway setups, we most often recommend Viking, Ghost Controls, DoorKing, and Elite for their reliability in high-rain, high-humidity conditions. Parts for these brands stay stocked on our trucks so most work is done in one visit. Call (626) 649-4572 with your operator brand and we’ll tell you what’s possible.
Out on a horse-property lot off a rural Pinehurst drive, we replaced a 16-foot welded tubular steel swing gate whose hinge post had heaved out of plumb after a spring wet cycle, dragging the panel and burning out the old operator. We poured a deeper, drainage-corrected post footing, hung the new gate, and paired it with a LiftMaster operator, safety photocells, and an outdoor keypad, then set a battery backup so a power cut wouldn’t trap the homeowner. Two months later the gate still swung clean with no sag.
That’s the standard we hold on every Pinehurst job. Written price first. Shoe covers and drop cloths inside. A cleanup photo before we leave. And a 365-Day Done Right Promise behind the work. Call (626) 649-4572 for a free estimate on gate installation in Pinehurst. A live person answers, day or night.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Pinehurst since the company’s founding in 2009.