Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Tomball
Gate installation in Tomball runs $1,400 to $6,800 for most driveway gates, with electric operators adding $900 to $2,500 depending on the brand and the length of the wire run. We quote that number in writing before any work starts, and that’s the number you pay. Tomball’s clay soil and humidity make this a different job than it is in Magnolia or Spring, and we treat it that way. If you’re off FM 2920 or down Hufsmith-Kohrville Road with a long driveway and an old tubular steel gate, you already know the gate fights the ground every season. Call (626) 649-4572 and we’ll come measure, price it honestly, and tell you what’s worth fixing and what isn’t.
Why Latch & Post Gate Repair Is Tomball’s Preferred Gate Installation Company
We’re the Gate Installation team inside the Cedarwell family, and we’ve been doing this work since 2009. Tomball’s acreage gates are a different animal than what you find in a 2005 subdivision over in Spring. The posts sit in gumbo clay that moves. The operators are old. The hinges have been through 50 inches of rain a year with no mercy. We know what that does to a gate because we’ve re-plumbed enough of them to recognize the failure before the operator burns out. Our technicians are background-checked, uniformed, and factory-trained on Viking, Ghost Controls, DoorKing, and Elite equipment, plus the LiftMaster and Mighty Mule boards families actually own out here. We lay drop cloths and wear shoe covers before stepping inside. We explain the price before touching anything. And every gate we install carries the 365-Day Done Right Promise: if it isn’t right, we make it right. No argument, no fine print.
Electric Gate Installation in Tomball
Electric Gate Installation in Tomball usually means one of two things: a brand-new automated driveway gate on a ranchette property, or replacing a legacy operator on a 15 to 20 year old gate that’s already there. We handle both. A new swing or slide operator from Viking, Ghost Controls, or DoorKing runs about $900 to $2,500 installed here, including the wire run, safety edges, and programming. The single biggest factor in Tomball isn’t the brand, it’s whether the existing post is still plumb. If the clay has tipped it, a new operator will bind and strip gears inside a year. We re-set the post first, then hang the operator.
Retrofitting Older Gate Frames
We can retrofit a modern operator onto an older tubular steel or ornamental iron gate if the frame isn’t rust-perforated and the hinges still hold alignment. Tomball’s humidity kills gate frames from the inside out. We check the bottom rails and hinge plates before we quote, because a cheap retrofit on a rotten frame fails within a year and costs you twice.
Pre-UL 325 Gates and Safety
A lot of gates hung around Tomball in the mid-2000s predate current UL 325 entrapment rules. If there’s no working photo-eye or reversing edge, we won’t just hang a new operator and walk away. We add the safety edges and photo-eyes so the gate stops when a kid or a dog runs through. The photo-eyes are part of the quote, not an add-on.
Driveway Gate Installation in Tomball
Driveway Gate Installation in Tomball is a standard job on the 1 to 5 acre properties along FM 2920, Hufsmith-Kohrville Road, and the streets feeding both. A single swing gate with welded steel frame and ornamental aluminum infill runs $1,400 to $3,800 installed, depending on width and finish. A double gate for a wider entrance runs $3,200 to $6,800. We do the concrete work, set the posts below the heave line where we can, and weld or bolt the frame square. In Tomball’s clay, deep footings and a diagonal brace on the gate frame matter more than a fancy latch.
Clay-Heave Footings
The black gumbo soil under Tomball expands when it’s wet and shrinks when it dries. A concrete footing poured 2 feet deep will heave. We dig to 3 feet or more on gate posts and use rebar cages so the post doesn’t tip 2 to 4 degrees within a few years. That’s the difference between a gate that runs clean and one that grinds the operator gears every August.
Swing vs. Slide on Sloped Drives
If your driveway slopes, a slide gate needs level track and often a longer operator run. A swing gate works better for many Tomball ranchettes with shallow drainage swales. We’ll walk the property, check the grade, and tell you which one makes sense before we quote anything.
Trusted Brands We Service in Tomball
We stock common boards, limit switches, and photo-eyes for Viking, Ghost Controls, and DoorKing, plus Elite and a few others out of the Houston warehouse, so Tomball jobs don’t wait on a two-week part order. If your operator is a 2008 LiftMaster that’s eating gears, we can usually have a Ghost Controls or Viking replacement on the truck next day. We don’t push a brand you’ve never heard of. We quote what fits your gate, your driveway, and your HOA’s spec if there is one.
Common Gate Installation Problems We See in Tomball Homes
- Clay-heaved post footings. Tomball’s expansive gumbo soil tips hinge posts 2 to 4 degrees over a few dry-wet cycles. The gate binds, the operator grinds, and the weld at the hinge plate cracks. We re-plumb the post before touching the operator.
- Rust perforation from 50 inches of annual rain. Ornamental iron gates on the fringes of Tomball rust through at the bottom rails and hinge plates faster than in drier Texas towns. We inspect what’s hidden before quoting a repair.
- Legacy operators with obsolete control boards. Many mid-2000s Tomball acreage gates still run boards that are no longer manufactured. When the board dies, the fix is often a new operator rather than a board replacement that costs almost as much.
- HOA-spec gates in Amira and Boudreaux Ranch. Master-planned communities around Tomball require specific ornamental aluminum or iron styles, and some require a certain operator mounting. We install to the HOA’s standard and confirm the spec before ordering.
Pricing for Gate Installation in Tomball, TX
A pedestrian gate in Tomball runs $600 to $1,400 installed. A single driveway swing gate runs $1,400 to $3,800. A double driveway gate runs $3,200 to $6,800. Adding an electric operator runs $900 to $2,500, including wiring and safety edges. The main cost drivers for Tomball jobs are gate width, whether the post footings need re-setting, and the wire-run distance from the house to the gate. HOA-matched gates may add $200 to $600 for specific finishes or styles. Every quote is in writing before work begins. Call (626) 649-4572 for a free estimate, and we’ll measure the same day we come out.
We Also Serve Cities Near Tomball
We serve Tomball and the surrounding northwest Houston corridor, including Pinehurst, Spring, Katy, and Conroe. If you’re a few miles past the Tomball line on a one-acre lot with a tired swing gate, we’ll schedule the same crew and the same written price, and you’ll see us just as fast.
Serving Tomball, TX - Our Local Coverage Area
We’re based in the Tomball area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Tomball
We can usually save the gate frame and replace or rebuild the operator, but it depends on how far the post has tipped and whether the frame has rusted through. If the hinge post is 2 to 4 degrees out of plumb, we re-set the footing first, then repack or replace the operator. If the frame is rust-perforated at the bottom rail, replacement’s often cheaper than repeated welding. Call (626) 649-4572 and we’ll look at it before recommending anything.
Yes. Tomball’s gumbo soil heaves several inches between wet winters and dry summers, which tips gate posts and binds the gate. That’s why we dig deeper footings and re-plumb any post that’s moved before we hang a new operator or gate. Ignore the soil and the work fails within a year.
A gate installed in Tomball needs working entrapment protection, usually photo-eyes and a reversing edge, plus a way to open it manually if the power goes out. Current UL 325 standards require this. We include photo-eyes and safety edges in every automatic gate estimate, and we won’t hang an operator without them.
Usually yes, if the gate frame is square, the hinges are solid, and the post is plumb. We’ll check the bottom rail and hinge plates for rust damage first. If the frame isn’t sound, retrofitting a new Viking or Ghost Controls operator onto it just means another failure later, and we’ll tell you that straight up. Call (626) 649-4572 and we’ll inspect it and give you a written price either way.
We install to HOA specifications in Amira, Boudreaux Ranch, and most other master-planned communities around Tomball. We confirm the required style, finish, and operator mounting with you or the HOA before ordering anything, and we quote to that spec. You’ll get the HOA-approved gate and a written price before any work starts.
If you need a new driveway gate, an electric operator, or an honest opinion on whether your old Tomball gate is worth saving, call Cody Beckman and the team at Latch & Post Gate Repair at (626) 649-4572. We answer live, 24/7. We’ll schedule a visit, write the price, and leave your floors clean and your gate square.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Tomball and the northwest Houston corridor since 2009.