Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Spring
Gate installation in Spring usually runs between $1,800 and $7,500 depending on the gate type, size, and whether the existing posts can be reused. Most standard single driveway swing gates sit in the $2,400 to $4,200 range, while full electric slide gates with operators land closer to $4,800 to $7,500. We quote every job in writing before we start, so you’ll know the exact number before any concrete gets poured or any panel gets hung.
Spring is home turf for us. We know the subdivisions off Kuykendahl, the older ranch-style lots along Louetta, and the newer builds north of the Grand Parkway. Scheduling is coordinated from our Houston office, and crews serve Spring daily, not occasionally. If you’re weighing a new gate for a home in Gleannloch Farms, Windrose, or Harmony, call (626) 649-4572 and we’ll walk you through what makes sense for your lot.
Why Latch & Post Gate Repair Is Spring’s Preferred Gate Installation Company
We’ve been doing this since 2009 as part of the Cedarwell family of independently owned and operated gate specialists. The work here is specific because Spring’s housing stock is specific. Thousands of ornamental iron gates went in between the late 1980s and the mid-2000s, and they’re now aging into the same failure window simultaneously. That gives us a deep familiarity with what Spring homeowners actually face.
Our technicians are background-checked and uniformed, and they follow the Cedarwell C.A.R.E. values on every job: Clean up like it is our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, Explain the price before the work. We lay drop cloths on the floor and put on shoe covers before we step inside. If you have kids napping or a dog who doesn’t like strangers, we schedule around that. Quiet tools, no surprises.
Cody Beckman, who runs Latch & Post, built the company on a simple rule: a written price before any work begins, every single visit. No pressure, no “while we’re here” upsells. If the installation isn’t right, the 365-Day Done Right Promise means we make it right, no argument and no fine print. Every call is answered by a live person, 24 hours a day, seven days a week.
Gate Installation Services in Spring
Gate Installation Services in Spring start with an honest look at your existing posts, hinges, and gate framing before we recommend anything. A new panel hung on a post that’s been pushed out of plumb by Harris County clay will sag and bind within months. So a proper installation here often begins with re-pouring the post footing, not just bolting on a new gate.
Most standard pedestrian gate installations in Spring run $900 to $2,200. Driveway swing gates typically fall between $2,400 and $4,200 for a single panel. If you need a double driveway gate with fresh posts and heavier ornamental iron, expect $4,500 to $7,500. These are real numbers for this market, and your written quote will match the work we describe, line by line.
Driveway and Pedestrian Gate Replacement
When a post has heaved or the original gate is rusted through at the bottom rail, replacement is usually cheaper than repeated repairs. We’ll match the ornamental iron style your HOA requires, down to the finial caps and spear points. The new panel gets hung on posts verified for plumb, with hinges sized for the gate’s actual weight.
New Post Setting and Alignment
Spring’s black clay soil expands and contracts with every rain-drought cycle, and posts that looked fine five years ago are now leaning. We dig out the old footing, set the post in concrete to true vertical, and brace it properly while it cures. This is the unglamorous step that determines whether your gate still opens smoothly in 2035.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Spring
Electric Gate Installation in Spring means pairing the right operator with the right gate, and making sure the whole system meets current UL 325 entrapment protection standards. Many homes here have legacy operators from the late 1990s that never had safety photocells, and a new install is the right moment to close that gap.
Adding a swing gate operator to an existing gate in Spring runs $1,800 to $3,400 including the motor, arm, and safety photocells. A complete slide gate installation with a new track, operator, and panel lands between $4,800 and $7,500. We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite, so the equipment we install is equipment we know how to service later.
Swing Gate Automation
For subdivisions where the driveway is short and the gate swings inward, a swing operator is the practical choice. We check the post first. An operator on a heaving post will bind and burn out the motor. If the post is solid, we complete the automation with photocells mounted at the correct height and a manual release in case of power failure.
Slide Gate Conversion and Automation
Some Spring homeowners with severe clay movement convert a sagging swing gate to a slide gate. A slide gate rides on its own track and doesn’t hang its full weight on a single hinge post, which makes it far more forgiving in expansive soil. The conversion adds cost, but it removes the recurring realignment problem permanently.
Trusted Brands We Service in Spring
We’re factory-trained on the brands Spring homeowners actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite. For Spring specifically, we keep replacement control boards for the most common LiftMaster and Elite operator models on hand before hurricane season, because post-flood call volume for drowned operators is reliably high and concentrated in a short window after each major rain event. That’s the kind of local stock planning we do because it’s Spring, not because a corporate inventory system told us to. Your gate gets fixed faster because the part is already on the truck.
Common Gate Installation Problems We See in Spring Homes
- Hinge posts heaved out of plumb by clay soil. Spring’s expansive black clay swells and shrinks with every wet-dry cycle, and posts throughout neighborhoods like Windrose and Gleannloch Farms shift a little more each year. A new gate hung on that post will sag, bind, and scrape the ground regardless of panel quality.
- Floodwater-damaged operators from Spring Creek. Homes near the Spring Creek floodplain repeatedly deal with operator pedestals submerged during heavy rain. The control board sits low and takes the first hit, so a post-storm replacement is common and we plan inventory around it.
- Legacy operators missing safety photocells. Gates installed before 2000 often run on LiftMaster or Elite operators without modern entrapment protection. Any new installation on those gates should include photocells and edge sensors to meet UL 325, and we don’t skip that step.
- Rust and corrosion from relentless humidity. Houston-area humidity above 75% for much of the year accelerates rust on iron frames and corrosion on low-voltage wiring, especially at connections near ground level. A new gate in Spring needs properly sealed connections and a corrosion-resistant primer under the paint.
Pricing for Gate Installation in Spring, TX
Here are honest, usable ranges for Spring’s market. A standard pedestrian gate runs $900 to $2,200 installed. A single driveway swing gate runs $2,400 to $4,200. A double driveway gate or a full slide gate with automation lands between $4,800 and $7,500. If we’re re-setting a post that heaved out of plumb, that adds $400 to $900 per post depending on depth and footing size. You’ll see the exact number in writing before any work starts.
The biggest cost drivers are gate length, ornamental iron versus plain aluminum, and whether the existing posts can be reused. If you’re in an HOA that requires matching original ironwork, expect to pay toward the higher end of these ranges. Estimates are free, and there’s never pressure to decide on the spot. Call (626) 649-4572 and we’ll come measure.
We Also Serve Cities Near Spring
Our crews cover Spring daily and regularly work in Humble, Tomball, Houston, and Conroe. If you’re just outside Spring proper, the same written-price guarantee and 365-Day Done Right Promise applies. Latch & Post handles every job through our broader Gate Installation team, so you get the same local crew and the same standard of care.
Serving Spring, TX - Our Local Coverage Area
We’re based in the Spring area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Spring
Yes, if the posts are still plumb and structurally sound. We inspect the post footings first, because many Spring posts have been shifted by clay soil movement. If the posts are solid, we hang a new ornamental iron panel matched to your HOA’s specifications. If they’ve heaved, we re-set them before hanging anything. Call (626) 649-4572 and we’ll tell you what your posts can actually support.
If the control board is corroded and the operator is more than 10 years old, replacement is usually the cheaper answer. A new operator with fresh safety photocells runs $1,800 to $3,400 in Spring, and trying to salvage a water-damaged board often costs more over two years than replacing it now. We’ll show you both options in writing. Call us at (626) 649-4572 and we’ll inspect the operator for free.
Most gates in Spring installed before 2000 do not. UL 325 current standards require safety photocells and entrapment protection on automated gates, and many legacy LiftMaster and Elite operators here predate those requirements. If we’re installing anything on your gate, we bring it up to current code as part of the work. Call (626) 649-4572 for an inspection and a written plan.
Spring’s Harris County black clay swells when wet and shrinks when dry, and that cycle pushes gate posts out of plumb over time. That’s why we often re-pour the post footing before hanging a new gate here, something you might not need in neighborhoods with sandier soil. A new gate installed without addressing the footing will sag and bind within a few years. Call (626) 649-4572 and we’ll check your posts before quoting.
Yes, and it’s a practical solution in Spring where clay movement keeps pulling hinge posts out of line. A slide gate rides on its own track instead of hanging its weight on a hinge post, so it tolerates soil movement far better. The conversion runs $4,800 to $7,500 including the track, operator, and new panel. Call (626) 649-4572 for a written quote on a slide gate conversion.
If your gate is sagging, rusted, or you’re simply tired of wrestling it open every morning, call (626) 649-4572 for a free estimate. A live person answers around the clock, and the written price you get is the price you pay.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Spring since 2009.