Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Spring, TX
Gate repair in Spring, TX covers a specific set of problems most other Houston suburbs don’t see at the same scale: ornamental iron driveway gates in master-planned communities built between the late 1980s and mid-2010s, now aging into their first major overhaul cycle all at once. The dominant call is a sagging or misaligned gate post, pushed out of plumb by Harris County’s expansive black clay soil, which moves with every wet-dry cycle. Add Houston humidity rusting iron frames and Spring Creek flooding drowning operator control boards, and you have a repair market shaped by clay, moisture, and time. Latch & Post Gate Repair works these conditions daily. Call (626) 649-4572 any hour, and a live person answers.
Why Spring Homes Are Different
Spring is not one housing type. It’s a patchwork of HOA-governed subdivisions like Gleannloch Farms, Windrose, and Harmony, where ornamental iron and aluminum automated gates were written into the original deed restrictions. Those gates are now 15 to 30 years old, which means entire neighborhoods are hitting their first mechanical and electrical failure window simultaneously. The soil underneath them is the bigger story: expansive black clay that swells when wet and shrinks when dry, heaving gate posts a fraction of an inch at a time until the latch no longer lines up, the gate drags on the ground, or the opener strains against a post that’s tilted just enough to throw the whole geometry off. In sandier or rockier soil, a gate post might stay put for decades. In Spring, re-plumbing a post is a routine repair, not an anomaly.
Humidity above 75% for much of the year rusts iron gate frames and corrodes low-voltage control wiring faster than homeowners expect. And along the Spring Creek floodplain, a known Harris County flood corridor, gate operator pedestals get submerged in heavy storms, killing control boards. Technicians who work these subdivisions stock replacement boards for common LiftMaster and Elite operator models before hurricane season, because the post-storm call surge is predictable and concentrated. When we pull up to a Spring home, we already know what the soil, the moisture, and the age of the neighborhood are likely to have done to that gate.
Our Main Spring Services
Most Spring calls fall into two categories: a gate that’s sagging, rusted, or stuck, and an electric opener that stopped responding. Each service has its own detailed Spring page below.
Gate Repair in Spring
Most Gate Repair in Spring calls start with a latch that won’t catch or a gate that drags on the concrete. In Spring, that usually traces back to a post that’s drifted out of plumb in the clay, not just a worn hinge. We re-set posts, replace rusted hinges and latches, and rebuild sagging frames on existing gates. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite equipment. Every repair starts with a written price before any work begins.
Gate Installation in Spring
New Gate Installation in Spring has to meet two masters: the HOA’s architectural standards and the clay under the post holes. We sink posts deeper than code minimums where the soil heaves, choose materials that hold up to Houston humidity, and build gates that swing or slide true for years. We handle ornamental iron and aluminum, manual or automated, and we walk you through the HOA approval process before anything gets ordered. You’ll get a written quote for the full installation before we schedule.
Electric Gate Repair in Spring
When an opener hums but won’t move, or a keypad goes dead after a storm, our Electric Gate Repair in Spring page covers exactly what we diagnose and fix. In flood-prone parts of Spring, a drowned control board is the usual suspect; in older installations, it’s corroded low-voltage wiring. We’re factory-trained on the brands families actually own, and we carry common replacement boards so many electric repairs happen on the first visit. Written price first, always.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Spring
Our Spring vans carry parts for the operators we see most in this market: Linear, Viking, Ghost Controls, and DoorKing. That means fewer second visits waiting on a part. See the full list on our brands page.
Pricing for Gate Company in Spring, TX
| Service | Typical range in Spring |
|---|---|
| Gate post realignment (clay heave repair) | $250-$600 |
| Gate latch replacement | $95-$320 |
| Gate hinge replacement (pair) | $150-$400 |
| Ornamental iron rust repair and repaint | $350-$900 |
| Driveway gate operator replacement (installed) | $1,200-$3,200 |
| Control board replacement | $300-$650 |
| Low-voltage wiring repair | $180-$450 |
| Full manual gate fabrication and install (single swing) | $2,500-$6,500 |
| Electric gate package (gate plus operator, installed) | $5,500-$14,000 |
| Keypad and safety sensor replacement | $250-$550 |
What pushes price up in Spring is almost always the post. When clay has shifted a post more than a couple of degrees, realigning it means pulling and re-setting it in concrete, not just torquing bolts. You’ll never guess what the bill will be; every single visit includes a written price before we touch anything.
Neighborhoods We Serve in Spring
We cover the full Spring area, from the older subdivisions along Cypresswood to the newer builds in Harmony and beyond. Our crews are in the area regularly, so most repair calls get seen within one business day.
- Gleannloch Farms
- Windrose
- Harmony
- Spring Creek Oaks
- Northgate Forest
Service Area – Cities Near Spring
Our Spring-based crews also serve the surrounding communities. If you’re in Humble, TX, Tomball, TX, Houston, TX, or Conroe, TX, the same written-price-first routine and 365-Day Done Right Promise apply.
Serving Spring, TX - Our Local Coverage Area
We’re based in the Spring area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Spring
Most repair calls in Spring are scheduled within one business day. If your gate won’t close and your kids or pets are in the yard, tell the person who answers the phone, and we’ll do everything possible to get there faster. Calls are answered by a live person around the clock, including weekends and holidays.
Repairs that keep the gate’s existing style, color, and footprint typically don’t need HOA approval. Replacements or new installations often do. We’re familiar with the deed restrictions in Gleannloch Farms, Windrose, Harmony, and surrounding communities, and we’ll tell you upfront if your project needs an application before we order materials.
Yes, if your gate operator pedestal sits in a low spot. Submersion kills control boards fast. After heavy storms, we see a predictable wave of dead openers in the floodplain. If your keypad lights but nothing moves after a storm, the board is the first thing we check. Call (626) 649-4572 and we’ll diagnose it over the phone if we can.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Spring Customers Say
"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide