Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Conroe, TX
Gate work in Conroe, TX comes with a specific set of conditions you don’t see twenty miles south. The soil heaves with the seasons, the humidity never really lets up, and a huge portion of the city’s gates were installed in the same 15-year building boom, which means thousands of them are now reaching the end of their service life at roughly the same time. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we focus on one thing: gates that latch, swing, and open when they’re supposed to. Call us at (626) 649-4572 and a live person answers, any hour.
Why Conroe Homes Are Different
Conroe’s growth story shapes every gate we open. Most of the city’s housing stock went in between the early 2000s and today, built across master-planned communities that stretch from modest entry-level subdivisions up to Lake Conroe estates. What that means for gate work is simple: a whole generation of automated gate operators, all similar vintage, are now hitting end-of-life together. We see the same LiftMaster and Viking boards failing in neighborhoods across the city, often within months of each other, because they were all installed around the same time.
Then there’s the climate. Persistent subtropical humidity, routinely above 85%, works on hinges, frames, and circuit boards year-round. And for properties near creeks or around Lake Conroe, Harvey in 2017 left low-mounted motors and control panels submerged, and those corroded components are still failing years later. The other distinctly Conroe problem is the soil. Montgomery County clay expands and contracts dramatically between wet and dry seasons, and gate posts heave several inches. A gate that won’t close cleanly is often not an operator failure at all, it’s a post that moved. Our technicians check post movement before they touch the operator, because in Conroe that’s the most common root cause.
Our Main Conroe Services
Most calls we take from Conroe homeowners fall into one of three buckets: a gate that won’t open or close properly, a gate that needs replacing or building new, or an electric operator that’s misbehaving. Each has its own page with the full detail.
Gate Repair in Conroe
A sagging or stuck gate in Conroe usually traces back to post movement, hinge corrosion, or a latch that’s been fighting the humidity. We repair gates on wood-privacy-fence lots and wrought-iron community entry gates, and we always start by finding the actual cause before we touch the parts. Because so many Conroe gates are the same age, the repair is often less than half the cost of replacing the whole leaf. We bring the right hardware the first time so your gate works that day. See what a typical repair covers on the Gate Repair in Conroe page.
Gate Installation in Conroe
New gate installation in Conroe has to account for clay soil that moves. A post set without that in mind will be leaning within two seasons. We build for the soil we actually have here, not a generic spec, and we work with the HOA standards that govern most of the city’s master-planned communities. For older rural properties on the edges of Conroe, we also handle the upgrade from manual agricultural-style driveway gates to automated systems as the urban boundary expands. Details and options are on the Gate Installation in Conroe page.
Electric Gate Repair in Conroe
Automated gate problems in Conroe fall into familiar patterns: low-clearance motors that flooded during Harvey and still carry corroded connections, circuit boards degrading in 85% humidity, and false obstruction errors caused by posts shifting in the clay. We service Viking, Ghost Controls, DoorKing, and Elite operators, among others, and we diagnose the whole system rather than swapping parts at random. Many electric gate issues in this climate are wiring and connection failures rather than motor failures. Read the full breakdown on the Electric Gate Repair in Conroe page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Conroe
Our technicians are factory-trained on the gate operators and hardware families we see most around Conroe, including Viking, Ghost Controls, DoorKing, and Elite. We keep common parts for these brands stocked locally so we don’t waste half the visit waiting on a shipment. You can see the full list at our brands.
Pricing for Gate Company in Conroe, TX
The table below gives honest ranges for the work we do most often in Conroe. Every job gets a written price before we start, so the number you see is the number you pay.
| Service | Typical range in Conroe |
|---|---|
| Gate latch replacement | $120 - $240 |
| Hinge replacement (pair) | $150 - $320 |
| Gate post reset (clay soil heave) | $280 - $520 |
| Wrought-iron gate realignment | $180 - $380 |
| Automatic gate opener troubleshooting | $89 - $180 |
| Operator control board replacement | $260 - $520 |
| Photo-eye / safety sensor replacement | $130 - $260 |
| Gate opener motor replacement | $340 - $680 |
| Full gate installation (single swing) | $1,400 - $2,800 |
What pushes cost up in Conroe is usually the soil. A post that’s heaved several inches takes longer to reset properly than a loose hinge, and flood-damaged wiring from Harvey can add time to electric repairs. Whatever the case, you’ll get the exact number in writing before any work begins, and there’s no pressure to accept it on the spot.
Neighborhoods We Serve in Conroe
We cover all of Conroe and the surrounding area. We’re in and out of the master-planned communities daily, and we also take calls from the older rural properties on the edges as they convert to automated gates. Here are a few of the neighborhoods we visit regularly:
- Grand Central Park
- Rivershire
- Bentwater
- Woodland Hills
- Del Lago
For most Conroe repair calls we can have a technician to you the same day, and scheduling is coordinated from our Houston office with crews working locally in Conroe.
Service Area – Cities Near Conroe
While this page covers Conroe specifically, we also work in the communities around it. You can find dedicated pages for Willis, TX, Pinehurst, TX, Spring, TX, and Tomball, TX if you’re just outside the Conroe lines. Each is an independent local operation working to the same Cedarwell Care Promise.
Serving Conroe, TX - Our Local Coverage Area
We’re based in the Conroe area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Conroe
Most of Conroe’s master-planned communities require HOA approval before you change a gate’s appearance, height, or automation system. Repairs that restore the existing gate to its original condition usually don’t need approval. We can tell you what to check with your specific HOA before you schedule, and we’ll match the work to their written standards. Call (626) 649-4572 and we’ll walk through it together.
For repair calls, we can typically have a technician at your Conroe home the same day you call. A live person answers the phone 24/7, so you’re not leaving a voicemail while a gate hangs open all night. Electric gate failures that leave a driveway exposed get the same priority.
Yes. Post heave from Montgomery County clay is one of the most common gate problems we fix in Conroe, and it’s often mistaken for an operator failure. We reset the post properly for the soil, realign the gate leaf, and only then check whether the automated system needs attention. It’s the sequence that matters, and it saves you from paying for an operator you didn’t need.
Call Latch & Post Gate Repair at (626) 649-4572 for a free estimate on any gate work in Conroe. A live person answers, and we’ll put the price in writing before we touch anything.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Conroe Customers Say
"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide