Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Frisco
If you need a gate installed in Frisco, TX, here’s the straight answer: most driveway gate installations run between $3,800 and $7,500 for a mid-size steel or iron gate with a basic operator, while electric slide gates for wider driveways typically land between $5,200 and $9,800 depending on span and power setup. We serve every corner of Frisco from Stonebriar to Phillips Creek Ranch, and our crews know the difference between a sub-HOA ornamental gate and a west-side ranch entrance with no power at the road. The written price comes before any work starts, and you can reach a live person at (626) 649-4572 any time, day or night.
Why Latch & Post Gate Repair Is Frisco’s Preferred Gate Installation Company
Frisco homeowners call us because we treat a gate as two things only: the latch that holds it and the post that carries it. That focus matters in a city where Collin County’s black clay is quietly pushing posts out of plumb every wet-dry cycle, and where HOA architectural committees in Starwood and Newman Village require ornamental iron that actually stays true.
We’re part of the Cedarwell family of independently owned and operated gate specialists, and Cody Beckman leads our installations with the same routine on every Frisco job: written price before we touch anything, shoe covers and drop cloths inside the home, and a cleanup photo before we leave. No surprises, no pressure, no mess in the hallway. Our technicians are background-checked, uniformed, and trained on the brands families in Frisco actually run: Linear, Viking, Ghost Controls, and DoorKing among them. We’ve been doing this since 2009, and the 365-Day Done Right Promise covers every installation we put in the ground.
Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, but the crews live and work in this area. When someone off Rockhill Parkway calls at 7 a.m. about a gate that won’t open, the person who answers already knows what the soil did last spring on their side of town.
Electric Gate Installation in Frisco
Electric Gate Installation in Frisco is not one job. In a subdivision off Teel Parkway, it’s a powder-coated ornamental swing gate with a hardwired operator, a keypad, and safety loops already trenched from the garage. On the west-side acreage tracts outside city sewer, it’s a long driveway with no practical mains power, which means a solar panel, charge controller, deep-cycle battery bank, and an operator sized for the gate’s full span. Both are normal here, and both need to be quoted honestly before anyone digs.
Solar Operators for Off-Grid Frisco Entrances
We run solar gate openers on long Frisco driveways more than just occasionally. If trenching power from the house costs more than the gate itself, a correctly sized battery bank is the right call. We size the panel and battery for the operator’s duty cycle and the gate’s weight, not just the opening width. A Viking or Linear slide operator running off a 35-watt panel with two deep-cycle batteries will cycle a 16-foot gate through North Texas heat without sagging.
Tying Into Existing Access Control
Most Frisco HOAs want your new gate to match the neighborhood’s access style, which often means a keypad, a telephone entry box, or a vehicle loop. We install those as part of the job, not as a line item you discover later. The price includes the operator, the safety edges, the wiring, and the programming for however many remotes and codes your household needs.
Driveway Gate Installation in Frisco
Driveway Gate Installation in Frisco usually means one of two things: a decorative swing gate at a tract home entry off Legacy Drive, or a heavy slide gate spanning a wide entrance on a property with livestock, equipment, or a long gravel approach. The difference is load. A gate that weighs 600 pounds needs a post footing that won’t heave when the clay swells, and a gate that spans 16 feet needs a rack-and-pinion system rated for that span every single day, not just in the brochure.
Swing Gates for Standard Frisco Lots
A single swing gate on a 12-foot driveway off Independence Parkway typically runs $3,800 to $5,900 installed, including the operator, keypad, and safety devices. That price assumes the posts go deep enough to stay plumb in Collin County clay. We pour footings below the frost-and-shrink zone and use heavier gauge posts than a gate that size would technically need, because the soil here moves more than the chart says.
Wide Slide Gates for Acreage and Ranch Entrances
On the western edge of Frisco, where properties off FM 720 and Rockhill Road stretch past what a standard lawn gate can span, slide gates make more sense. A 16-foot galvanized steel slide gate with a rack-and-pinion Viking operator typically runs $6,200 to $9,800 here, and that includes the solar or hardwired power and a longer safety loop. Undersized residential operators burn out on these gates, so we spec commercial-duty gear from the start.
Trusted Brands We Service in Frisco
We install and service operators from Linear, Viking, Ghost Controls, and DoorKing, and we keep common parts on hand specifically for the models Frisco homes were built with between roughly 2003 and 2015. That matters here because so many subdivisions were developed in compressed timelines, so a whole street might share the same operator vintage. When a DoorKing board fails off Eldorado Parkway, we don’t have to order the part and come back next week. We fix it on the first visit.
Common Gate Installation Problems We See in Frisco Homes
- Clay heave on post footings: Collin County’s expansive black clay swells after rain and shrinks in drought, and over ten years that movement can push a hinge post nine inches out of plumb. A gate that dragged last month may be the post leaning, not the hinge failing.
- No mains power at the entrance: The acreage pockets west of Dallas North Tollway often have mailboxes and long driveways but no wiring at the road. Hardwired operators fail to run there. A solar gate opener with a right-sized battery bank is the fix, not a workaround.
- HOA approval before installation: In Starwood, Newman Village, and Phillips Creek Ranch, the architectural committee wants to see the gate’s finish, style, and operator housing before anything gets poured. We help homeowners submit that package with a written price they can show the HOA.
- Operator sizing for wide spans: A 14- or 16-foot farm gate weighs far more than a residential swing gate, and residential-rated operators get hot, trip their limits, and die early. We install heavy-duty operators rated for the actual duty cycle, not the gate’s paper width.
Pricing for Gate Installation in Frisco, TX
Here are real Frisco ranges, not ballpark ranges from another market. A pedestrian gate install runs $1,800 to $3,200. A single driveway swing gate with operator lands between $3,800 and $5,900. A double swing gate on a wider driveway runs $5,000 to $8,000. A 16-foot slide gate with a rack-and-pinion operator and solar power on an acreage property runs $6,200 to $9,800. What changes the number is span, gate weight, power source, and whether the existing posts are usable or need to be re-poured because of clay heave. You’ll see the exact figure in writing before we start, and it’s the figure you pay. Call (626) 649-4572 for a free measure and a written estimate.
Acreage Gates on Frisco’s West Side: Power and Span First
Frisco’s west-side acreage pockets are not on city sewer, and many are outside practical mains reach. A grid-tied gate operator there fails to run because there is no grid at the entrance. That’s why we treat every long-driveway install as a power-and-span problem first. The operator has to be solar with a correctly sized battery bank, and the post footings have to be oversized because Collin County’s expansive black clay heaves them seasonally. One job off Rockhill Road near Newman Village stuck with us. We installed a 16-foot slide gate with a rack-and-pinion Viking operator where the homeowner had no practical mains power, so we ran a solar gate opener with a deep-cycle battery bank. The old swing gate had heaved so badly from clay movement that the hinge post was 9 inches out of plumb, so we poured a wider, deeper post footing before setting the new track. The gate now clears the full span and cycles on its own through rain-drought swings. That’s what a rural Frisco entrance actually needs, and it’s where our Gate Installation team does its best work.
We Also Serve Cities Near Frisco
If you’re outside Frisco proper, we also handle Gate Installation in Frisco and the surrounding communities. Prosper, Aubrey, Little Elm, and Celina are all within our regular service area, and the same written-price routine and 365-Day Done Right Promise apply there too. Call (626) 649-4572 and a live person will set up your measure.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Frisco
Yes. For entrances far from a breaker panel, we install a solar opener with a panel, charge controller, and a deep-cycle battery bank sized to the gate’s weight and operating frequency. The gate runs on battery power, recharges from the panel, and cycles through North Texas heat and rain without grid power. Call (626) 649-4572 to talk through what your driveway length actually needs.
The heavy black clay under Collin County swells when wet and shrinks when dry, and that cycle exerts more lateral pressure on a post footing than sandier soils in neighboring areas. Ten years of that can push a hinge post visibly out of plumb. We pour wider and deeper footings than the gate’s size would normally call for, specifically to hold up in this soil.
For a gate wider than 14 feet or weighing more than 800 pounds, a residential-rated operator is the wrong tool. Those motors burn out under the load of a wide farm gate. We spec commercial-duty rack-and-pinion or chain-drive operators from Viking, Linear, or DoorKing for those spans, and we match the motor to the gate’s real duty cycle, not its listing price.
Yes. UL 325 applies to every automatic gate installation in Frisco and everywhere else in the United States. A gate operator that can close on a person or a vehicle needs a primary and secondary entrapment protection device, usually a monitored safety edge plus a photo eye or a vehicle loop. We include these in every electric gate quote, not as an add-on.
We can. Keypad entry, telephone entry, and vehicle detection loops are standard parts of a rural gate installation here, and we include them in the written quote before work starts. For a long driveway or an entrance shared with livestock and equipment, we’ll typically spec a keypad with the operator and one or two loops so the gate doesn’t close on a trailer or a horse. Call (626) 649-4572 for exact pricing on your setup.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Frisco since 2009.