Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Celina
Gate installation in Celina is different from gate work almost anywhere else in North Texas. Because most of the city’s subdivisions were built after 2015, hundreds of homes in Light Farms, Mustang Lakes, and Lilyana are reaching their first major gate service and replacement cycle at the same time. Our crews know Celina’s streets, its HOA rules, and the specific things that go wrong with builder-grade gate hardware on black clay soil. If you’re asking what a new driveway or pedestrian gate will cost here, most Celina installations run between $2,800 and $9,500 depending on size, material, and automation, and the price is always in writing before we start. Call (626) 649-4572 and a live person answers, day or night.
Why Latch & Post Gate Repair Is Celina’s Preferred Gate Installation Company
We’re not a general handyman service. Latch & Post Gate Repair - Celina is part of the Cedarwell family and has been focused exclusively on gate repair, gate installation, and electric gate repair since 2009. That narrow focus means our technicians spend every workday on gates, not splitting time between fences, decks, and gutters. Homeowners in Celina call us because we arrive with shoe covers and drop cloths, lay them down before we step inside, and send a photo of the clean-up before we leave. It’s the Cedarwell Care Promise, and it’s not an upsell: written price first, floors protected, cleanup documented. Every job is also covered by our 365-Day Done Right Promise, meaning if the installation isn’t right, Latch & Post makes it right. No argument, no fine print.
Celina’s HOA communities add another reason local experience matters. We flag architectural-control requirements before any visible hardware change, which keeps a one-day job from turning into a two-week approval stall. Cody Beckman, who leads our team, has worked with enough Celina HOA boards to know which communities require written approval and which just want a courtesy heads-up.
Gate Fabrication in Celina
Gate fabrication in Celina usually means building a custom ornamental iron or steel gate for a driveway or pedestrian entry where the builder’s stock panel either doesn’t match the home’s style or has already failed structurally. The job involves measuring the opening, accounting for post movement, fabricating the frame and pickets, fitting the hinges and latch, and painting or powder-coating the finish for North Texas weather. A custom fabricated single swing gate in Celina typically runs $3,200 to $7,800, depending on panel weight, decorative work, and whether you add an operator. That figure includes the written quote before fabrication starts.
Custom Driveway and Double Gates
In Celina, double driveway gates are the single most common request we fabricate. The reason is practical: HOA communities like Cambridge Crossing and Lilyana often require a driveway gate to match the architectural language of the home itself, and stock panels rarely do. A fabricated double swing gate with a steel subframe runs $6,000 to $11,500 installed. We build the frame heavier than builder-grade by design, because Celina’s clay soil movement punishes anything undersized within a year.
Pedestrian and Walk Gates
Pedestrian gate fabrication is usually smaller and faster, but it still needs the same care with post depth and hinge alignment. In Celina, we mostly see these at side yards and HOA amenity paths. Expect $1,600 to $3,900 for a custom fabricated pedestrian gate, including a latch set and powder coat. If the gate will carry a keypad or intercom, we plan the conduit and wire path before we weld anything.
Automatic Gate Installation in Celina
Automatic gate installation in Celina typically involves retrofitting an operator onto an existing manual gate, or replacing an undersized builder-grade operator that can no longer move a heavy ornamental iron panel. The job includes mounting the motor, installing safety photocells, running or extending power, and programming remotes and keypads. A single swing gate operator install in Celina runs $1,900 to $4,400, and a full new automation package with a fabricated gate starts around $5,200 and can reach $12,000 for heavy double slide gates. The written price covers everything, and the quote is agreed before any work begins.
Swing and Slide Gate Operators
We install and service operators from LiftMaster, FAAC, BFT, and Linear, among others. In Celina’s newer subdivisions we often see builder-grade operators that are simply too small for the gate panel they were paired with. That mismatch burns out motors and strips gears within a few years. We size the operator to the actual panel weight, not the builder’s original spec sheet.
Keypads, Intercoms, and Loop Detectors
Many Celina homes are adding keypad entry or a vehicle loop detector years after the build, which means trenching a new circuit because the original builder never prepped the driveway edge. We run the conduit, pull the wire, and set the exit loop so the gate opens automatically as your car approaches. This is the part of the job that surprises people, and we address it in the written estimate up front rather than after the trench is open.
Trusted Brands We Service in Celina
Our technicians are factory-trained on the brands Celina families actually have installed, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your hardware is from DoorKing, Elite, Viking, or Ghost Controls, we carry common replacement parts in local stock. That means a failed circuit board or stripped limit switch often gets fixed on the first visit instead of waiting on a shipment. We don’t guess at other brands; we work on what we know.
Common Gate Installation Problems We See in Celina Homes
- Out-of-plumb gate posts. Celina sits on Houston Black clay that shrinks in summer drought and heaves after rain. Posts set by a rushed builder shift within the first year, dragging the hinge post with them and making the gate sag into the latch.
- Undersized builder-grade operators. A heavy ornamental iron gate needs a motor rated for its actual panel weight, but many Celina builders installed whatever was cheapest. That’s why a five-year-old gate already grinds or stalls.
- No power or conduit at the driveway. Builders rarely prepped the edge for gate automation, so homeowners who want a keypad or intercom now need a new circuit and trench. We handle the electrical run correctly the first time.
- HOA architectural approval stalls. Several Celina communities require written approval before any visible gate replacement or hardware change. We flag this before we touch the visible hardware, so the job doesn’t sit half-finished for two weeks.
Pricing for Gate Installation in Celina, TX
Here are the realistic ranges for Celina’s market. A basic single swing gate with a manual latch runs $2,800 to $5,400. A fabricated double driveway gate runs $6,000 to $11,500. Adding automation to an existing manual gate runs $1,900 to $4,400 for a swing operator, and a complete automatic slide gate with new panel can reach $9,500 to $14,000. The factors that move the price are panel weight, whether we’re trenching for power, and HOA design requirements. You’ll see the exact number in writing before we start, and the price never changes after the fact. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Celina
Our Gate Installation crews serve the communities around Celina as well, including Celina master-planned subdivisions and nearby Prosper, Frisco, Melissa, and McKinney. If you’re in one of those cities and need a gate built, automated, or repaired, the same written-price and clean-up process applies.
Serving Celina, TX - Our Local Coverage Area
We’re based in the Celina area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Celina
Most Celina HOAs require approval because gate hardware is visible from the street and the architectural-control committee wants to keep the neighborhood’s design consistent, so you’ll often need a written sign-off before any visible change. We flag the requirement before we start, which keeps your project from getting stopped halfway by the HOA. Call (626) 649-4572 and we’ll help you identify what your specific community requires.
Yes, it’s common in Celina’s post-2015 subdivisions because the builder-grade operators and posts were often undersized for the heavy ornamental iron panels and the Houston Black clay shifts the posts out of plumb within a year. We regularly replace those early-failure operators with correctly sized units during Gate Installation work. A quick site visit tells us whether it’s a post heave problem or an undersized motor.
Yes, and we do it often in Celina, but you may need a new power circuit and conduit run because most newer homes were built without gate electrical. The written estimate includes the trench and wire path. The final price is agreed before we start, and you’ll see the operator size recommendation matched to your actual panel weight.
It depends on the actual panel weight, not the builder’s original spec, and in Celina we see many heavy iron gates that need at least a 1/2 HP swing operator or a rack-and-pinion slide system rather than a light residential motor. We weigh the panel and match the operator capacity with headroom. Get the exact recommendation with a free estimate by calling (626) 649-4572.
If you want the gate to open automatically when your car approaches, yes, a vehicle loop detector is the way to make that work reliably. A keypad is what you’ll use for entry codes, and many Celina families add both. We include the loop wire, keypad, and programming in the written quote, and we can wire the system so it works even during a winter ice storm that seizes lesser hardware.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Celina and the surrounding North Texas communities since 2009.