Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Prosper
A driveway gate installation in Prosper, TX typically starts around $1,800 for a single swing gate and runs up to $12,000 or more for a bi-parting automated iron gate with operators, safety edges, and keypad entry. Most Prosper homeowners need HOA architectural approval before any post hole is dug, which is why our Gate Installation team walks you through the committee’s recorded standards first, then installs. We’re local to Prosper, we know the subdivisions, and we answer the phone at (626) 649-4572 when you call.
Why Latch & Post Gate Repair Is Prosper’s Preferred Gate Installation Company
Prosper isn’t like older Dallas-area cities where gates range from 1970s chain-link to modern iron. Here, nearly every house was built after 2010 by a handful of production builders who specified the same ornamental iron driveway gates across entire subdivisions. That means when a Windsong Ranch or Star Trail homeowner calls us, we’ve likely already worked on the identical gate model three streets over. We stock the parts those builders used, we know which operators those communities run, and we show up with the right fix on the first trip.
Cody Beckman leads our Prosper crews, and he’s trained the team to treat every HOA-governed install as a two-part job: the visible gate and the invisible approval. We arrive in uniform, lay drop cloths and wear shoe covers if we step inside, and send you a photo of the cleanup before we leave. No other gate company serving Prosper bothers with that, and it’s exactly why families with kids and pets keep our number.
Our response time to Prosper is measured in hours, not days. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and crews serve Prosper locally. If your gate is binding or the operator is dead, call (626) 649-4572 and a live person picks up, 24/7. Not a voicemail. A person.
Automatic Gate Installation in Prosper
Automatic gate installation in Prosper usually means taking an existing builder-installed ornamental iron driveway gate and adding or replacing the operator that moves it, or installing a full automated system on a new build. The job involves setting or re-setting post footings, mounting the operator arm or underground slide track, running power, aligning safety photocells and entrapment edges, and programming remotes and keypads. In Prosper, the first step is almost always the HOA architectural committee: your subdivision’s covenants will specify gate height, iron profile, finish color, and operator placement, and a mismatched panel can get the whole job rejected before concrete is poured.
Builder-Installed Gate Automation
Hundreds of Prosper homes in Star Trail, Windsong Ranch, and Whitley Place came with LiftMaster, FAAC, or BFT operators installed by the builder between 2015 and 2022. Those systems are now cycling through their first major service period all at once. We service the exact models those builders used and stock the control boards, arm assemblies, and photocells that keep them running.
New Automatic Gate Systems
For a new automatic gate in Prosper, expect $3,200 to $9,500 for a single swing gate with operator, two remotes, keypad, and safety edges, installed and programmed. Bi-parting double gates run $6,500 to $14,000 depending on iron profile, finish, and whether you choose pad, post, or underground slide operators. Every quote is written and agreed before we order anything.
Gate Installation Services in Prosper
Gate installation services in Prosper cover the full range: driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates. Most Prosper homes have single swing or bi-parting driveway gates in ornamental iron, so that’s what we install most. But we also set pedestrian gates for pool enclosures and side yards, slide gates on ranch-style properties north of Highway 380, and heavier security gates where a homeowner wants a locking keypad and intercom.
Driveway and Double Gate Installation
A single-arch ornamental iron driveway gate with posts set in concrete runs $1,800 to $5,400 in Prosper. Double gates, which dominate the master-planned communities here, run $3,800 to $12,000 installed, not including the operator. The price depends on iron weight, finish, whether the posts are steel or masonry, and any HOA-mandated profile matching.
Pedestrian and Security Gate Installation
Pedestrian gates run $700 to $2,200 for a standard ornamental iron walk gate with latch and self-closing hinges. Security gates with keypad entry, maglock, or intercom run $2,800 to $7,500. In Prosper, most security gate requests come from homeowners adding a locking side gate to enclose a back yard for kids and dogs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Prosper
We’re factory-trained on the brands Prosper builders actually installed: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When a Whitley Place resident calls about a Linear operator that’s clicking but not moving, we know that board. When a Star Trail homeowner needs a FAAC swing arm replaced, we don’t have to order it blind and come back next week. We keep local part stock for the exact operator models those subdivisions run, which is a big reason we can often fix a Prosper gate in one visit instead of two or three.
Common Gate Installation Problems We See in Prosper Homes
- HOA architectural rejection before installation starts. A homeowner orders a beautiful iron gate that doesn’t match the subdivision’s recorded standard for height, picket profile, or finish. The committee rejects it, and now the homeowner is stuck with a panel they can’t install. We pull the community’s gate standards before we order anything.
- Post footing heave from Blackland Prairie clay. Prosper sits on expansive clay that swells after spring rain and shrinks in summer drought. Gate posts set without deep, properly cased footings get pushed out of plumb, and the gate sags or binds at the latch even when the operator is brand new.
- Freeze-cracked operator housings and control boards. February 2021 cracked housings and shorted boards across thousands of Prosper homes at the same time. Those failures are still cycling through as builder-spec systems fail one by one, and we stock the replacement parts.
- Misaligned safety photocells after heave events. When a post shifts even half an inch, the photocells that stop the gate from closing on a kid or a dog lose alignment. The gate reverses for no obvious reason. That’s rarely an operator fault; it’s a soil movement issue we correct at the footing.
Pricing for Gate Installation in Prosper, TX
Here’s what we quote in Prosper, as of this writing. A pedestrian walk gate runs $700 to $2,200. A single driveway swing gate in ornamental iron runs $1,800 to $5,400. A double gate runs $3,800 to $12,000 installed. Automatic operator installation on an existing gate runs $1,600 to $4,800, and a complete automated double gate package with operators, keypad, and remotes runs $6,500 to $14,000. Heavy security gates with intercom and maglock start around $2,800. The exact number depends on iron weight, finish, post type, operator model, and whether we’re removing a failed gate or setting new footings. You get the written price before any work starts, every time, with no pressure to accept.
We Also Serve Cities Near Prosper
Our crews serve Prosper and the surrounding towns daily. We’re in Frisco, Celina, Little Elm, and McKinney most weeks, often for the same HOA-governed iron gate work we do here. If you’re just outside Prosper and need a gate installed or an operator replaced, call (626) 649-4572 and we’ll get you on the schedule with the same written-price, drop-cloth care we bring to every job.
Serving Prosper, TX - Our Local Coverage Area
We’re based in the Prosper area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Prosper
Yes. Nearly every master-planned community in Prosper – Star Trail, Windsong Ranch, Whitley Place, and the others built after 2010 – requires architectural committee approval before a new gate goes in. The committee reviews the gate’s height, iron profile, finish color, and operator placement against the subdivision’s recorded standard. We can pull those standards for you and prepare the submission with shop drawings and a finish sample, which clears the path before we order anything. Call (626) 649-4572 and we’ll start that paper trail for you. Free estimate, written price before any work.
In Prosper, the most common cause is Blackland Prairie clay heaving the hinge post out of plumb. Expansive clay swells and shrinks with rain and drought cycles, and it physically moves post footings that weren’t set deep enough or cased properly. The gate sags at the latch, binds, or gaps, and the operator looks broken but isn’t. We re-set the footing, correct the sag, and re-aim the safety photocells. That’s the fix, not just adjusting the operator arm. Call (626) 649-4572 for an inspection and a written quote.
We can, and we do it constantly. Prosper builders used a small set of operator brands in the 2015-2022 boom, mostly LiftMaster, FAAC, and BFT. We’re factory-trained on all of them, and we stock the control boards, arm assemblies, and safety edges those systems need. If your builder-installed operator is dead or acting up, call (626) 649-4572 and tell us the model number. Chances are we have the part on the truck or can have it in a day.
Entrapment protection is the safety system that stops an automatic gate from closing on a person, a pet, or a car. It includes photocells that detect anything in the gate’s path, reversing edges on the gate itself, and a force-sensing operator that reverses if it meets resistance. These systems are required to be working before we complete any automatic gate installation, and misaligned photocells are one of the most common gremlins we fix after heave events shift the posts. Call (626) 649-4572 if your gate reverses for no reason; we’ll re-aim the sensors and test the full safety circuit.
The February 2021 winter storm froze and cracked operator housings and shorted control boards across thousands of Prosper homes at once, and those failures are still cycling through the city’s identical builder-spec gate systems. When we install a new gate or operator in Prosper, we account for that: sealed enclosures, heated control boards where the homeowner wants them, and wiring runs that can handle another hard freeze. We stock the replacement boards for the operators that failed in 2021, so we’re not ordering blind when your builder-installed system gives out. Call (626) 649-4572 for a written quote.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Prosper since 2009.