Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in North Richland Hills, TX
Most gate failures in North Richland Hills aren’t random. They’re tied to two things: the Blackland Prairie clay under your posts, and a wave of 1980s-2000s gate hardware reaching the end of its rated life all at once. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we focus on one thing: gates. Repair, installation, and electric operators. Nothing else. If your gate won’t latch, sags off its hinges, or stopped opening, call (626) 649-4572 and a live person answers, day or night.
Why North Richland Hills Homes Are Different
North Richland Hills built out fast in the 1980s through the early 2000s, and that pace left a specific signature: dense, HOA-governed subdivisions where ornamental iron driveway gates and wooden side-yard gates went in by the hundreds using the same handful of hardware brands. Those gates are now 20 to 40 years old. The operators, hinges, and posts installed during that era are hitting end-of-life on a similar timeline, so when one home on a street calls us for a failed opener, neighbors often follow within weeks.
The other factor is soil. North Richland Hills sits on expansive Blackland Prairie clay. It shrinks hard in summer drought and swells in fall and spring rain, heaving posts out of plumb and throwing hinges and latches out of alignment season after season. That’s why post realignment and re-hinging is a near-annual repeat call on lots of properties here, far more than in areas with sandier soil. In neighborhoods around Davis Boulevard, the cycle is especially visible on shared automated entry gates where the hardware ages the same way across an entire subdivision at once.
Our Main North Richland Hills Services
When North Richland Hills homeowners call, the request usually falls into one of three areas. Each has its own page with local detail, pricing, and what to expect.
Gate Repair in North Richland Hills
This is the call we get most from North Richland Hills: a gate that won’t close flush, a latch that stopped catching, or a post that’s tilted after a dry summer. The clay soil here means hinges drift out of plumb even when the gate itself is fine. We adjust, shim, replace hardware as needed, and set the gate so it swings clean again. You’ll get a written price before any work begins, and shoe covers and drop cloths come inside with us if the job touches your home’s interior access. Gate Repair in North Richland Hills
Gate Installation in North Richland Hills
A new gate in North Richland Hills has to account for the soil from day one. We set wood posts in concrete below the frost line, but more importantly, we size and brace for the clay’s shrink-swell cycle so a new gate isn’t leaning within two seasons. Whether it’s a side-yard privacy gate matching your fence or a driveway gate replacing a 1990s iron original, we measure, quote, and schedule around your family’s routine. Gate Installation in North Richland Hills
Electric Gate Repair in North Richland Hills
Many of the automated gates around Iron Horse and Hometown NRH went in during the late 1990s and early 2000s with LiftMaster and Viking operators now past their rated cycle life. A board that won’t power, a signal that drops when a sensor gets bumped out of alignment, or a motor that grinds and stops are the common calls. We diagnose first, carry parts for the brands homeowners actually own, and explain the fix before we start. Electric Gate Repair in North Richland Hills
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in North Richland Hills
Our North Richland Hills work is mostly on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, and DoorKing equipment. We stock common parts for these locally, which speeds up most repair visits. For a full list of equipment we cover, see our brands.
Pricing for Gate Company in North Richland Hills, TX
| Service | Typical range in North Richland Hills |
|---|---|
| Gate alignment and latch adjustment | $120 - $240 |
| Hinge replacement (standard residential) | $140 - $280 |
| Wood post replacement in clay soil | $350 - $650 |
| Wood privacy gate installation (side yard) | $600 - $1,400 |
| Ornamental iron gate installation (driveway) | $1,800 - $4,200 |
| Slide gate operator replacement | $950 - $2,400 |
| Swing gate operator replacement | $900 - $2,200 |
| Control board replacement (LiftMaster or Viking) | $380 - $900 |
| Safety sensor repair or replacement | $160 - $320 |
| Full-service call with diagnosis | $89 - $149 |
Two things push prices higher in North Richland Hills: post work in the expansive clay, which takes more concrete and more labor to do correctly, and repairs on 20-plus-year-old operators where multiple components failed together. Every quote is written before work starts, so the number you approve is the number on the invoice.
Neighborhoods We Serve in North Richland Hills
We work throughout North Richland Hills, from the older subdivisions near the center to the newer pockets on the edges. Response time in the area is generally same-day or next-day for repairs, depending on the time of year and how many neighbors are dealing with the same hardware failure wave.
- Davis Boulevard corridor communities
- Iron Horse and Hometown NRH areas
- Subdivisions near Loop 820
- Neighborhoods around Smithfield
- HOA communities with shared entry gates
Service Area – Cities Near North Richland Hills
Our North Richland Hills crew also serves nearby cities in the mid-cities area. That includes Hurst, TX, Haltom City, TX, Bedford, TX, and Colleyville, TX. If you’re on the edge of North Richland Hills and not sure which city you fall under, call and we’ll confirm coverage.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in North Richland Hills
For repair calls, we’re usually on-site same-day or next-day across North Richland Hills. A live person answers the phone 24/7, so you’ll know your window before you hang up. If the gate is stuck open and the job is urgent, tell us when you call and we’ll prioritize accordingly.
Many North Richland Hills subdivisions have HOA rules about gate style, height, and even paint color. If you’re replacing rather than repairing, check with your association first. We can match common community standards, but the approval itself comes from your HOA board.
Yes. Every visit includes a written price before any work begins, and you approve it first. No weekend surcharge, no surprise line items. That’s the Cedarwell Care Promise, and it applies to every gate job we do in North Richland Hills.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What North Richland Hills Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco