Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Compton, CA
Gate work in Compton is different from gate work almost anywhere else in Los Angeles County. Most of the city’s wrought-iron driveway and pedestrian gates went in during the late 1980s and 1990s, when homeowners across Compton installed security packages in response to the crime surge of that era. Those gates are now 25 to 35 years old and failing together – rusted welds, sagging hinges, operators that were never sized for the added weight. We’re a Compton-area gate company that focuses on exactly that: rehabilitating aging iron, matching new work to old footings, and doing it without leaving a mess behind. Call (626) 649-4572 when you want a straight answer and a written price.
Why Compton Homes Are Different
Compton’s housing stock is mostly post-WWII single-family bungalows and small ranch homes built between the 1940s and the 1960s, on narrow lots with original concrete driveways that have settled and cracked over the decades. That matters when a gate post needs new footing work, or when an automatic operator needs proper clearance. The concrete usually fights back. Most driveways have shifted enough that a new gate installation requires custom post work before the gate itself can even be measured.
The marine layer sits over Compton for much of the year, 10 to 12 miles inland from the Pacific. Morning moisture settles into unprotected iron at welds and hinge points. Then a Santa Ana wind comes through, cracks and peels the paint, and bare metal sits waiting for the next damp cycle. We see the same rust-repair-repaint loop on the same properties year after year, and we plan for it: heavier priming, better drainage around the post base, and hinge points that don’t trap water.
We also find a lot of “layered” gates – original 1990s iron frames onto which owners welded or bolted extra security bars over the years. That added steel can double the gate’s weight beyond what the original operator was rated for. The gate looks standard from the street, but the motor has been silently burning out for years.
Our Main Compton Services
The two calls we hear most from Compton homeowners are for gate repair on tired iron and for electric gate repair on operators that no longer move the weight they carry. Each service has its own Compton page with specific local detail and pricing.
Gate Repair in Compton
Most Compton gate repairs start with a hinge or a weld. The marine air rusts hinge barrels, and the extra weight of layered security bars bends hinge posts a few degrees every year until the gate starts dragging on the concrete. We repair or replace the hardware, realign the leaf, and recoat bare metal before it becomes next season’s rust. When a gate is worth saving, we tell you plainly. When it’s not, we tell you that too. Learn more about Gate Repair in Compton.
Gate Installation in Compton
New gate work here usually means working around settled, cracked driveways and dealing with clearances that were never generous to begin with. We measure for the gate and the operator together, set posts on fresh concrete, and build for the weight the gate will actually carry – including any bars a homeowner adds later. Pet-safe spacing, kid-safe pinch points, and a written price before any work starts. See Gate Installation in Compton for the full breakdown.
Electric Gate Repair in Compton
Electric gate repair in Compton frequently comes down to one problem: the operator was sized for a standard gate, but the gate now weighs much more than standard. Burned-out motors and stripped gears are common, and so are photo eyes that got knocked or cut during a concrete shift. We diagnose, then repair or replace, always with a written price first. More on Electric Gate Repair in Compton.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Compton
We’re factory-trained on the brands Compton families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Common boards, remotes, and photo eyes are stocked locally, which means most repairs happen on the first visit. See our brands for our full equipment list.
Pricing for Gate Company in Compton, CA
| Service | Typical range in Compton |
|---|---|
| Gate latch replacement | $160 - $290 |
| Hinge replacement (pair) | $180 - $340 |
| Sagging gate realignment | $190 - $350 |
| Weld-on steel re-securing | $140 - $260 |
| Operator motor replacement | $380 - $680 |
| Control board replacement | $280 - $520 |
| Photo eye repair or replacement | $150 - $280 |
| Remote programming (per remote) | $60 - $120 |
| New automatic gate package (single swing) | $1,600 - $3,000 |
| New automatic gate package (double swing) | $2,400 - $4,200 |
| Custom wrought-iron driveway gate | $2,200 - $6,000 |
| Gate removal and disposal | $180 - $350 |
What pushes a Compton job toward the top of those ranges? Usually the concrete. A settled driveway adds post work, a second layer of steel over the original iron adds weight, and months of marine moisture turn a quick hardware swap into a prep-and-recoat job. Whatever the number, you’ll see it in writing before any work begins – no deposit, no surprise invoice.
Neighborhoods We Serve in Compton
Our Compton crews know the housing stock block by block, from the bungalows off Long Beach Boulevard to the ranch homes near Alondra. Most gate repair visits take one to two hours on site, and electric operator diagnostics run about the same.
- Richland Farms
- North Compton
- Sunny Cove
- Compton Creek area
- South of Rosecrans
Service Area – Cities Near Compton
Compton sits at the center of our South LA service area, and the same stretch of marine-layer air and aging iron continues through the surrounding cities. We typically run at least one crew through this corridor each weekday. In Gardena, CA and Carson, CA, the housing patterns are nearly identical to Compton’s, and we see the same rusted-hinge and layered-bar problems. Lynwood, CA and Paramount, CA round out the area we cover, and the same written-price promise applies in every one of them.
Serving Compton, CA - Our Local Coverage Area
We’re based in the Compton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Compton
Most Compton calls are scheduled within one to three business days. We keep focused routing through South LA, so you’ll usually get a morning or afternoon arrival window rather than an all-day wait. Calling (626) 649-4572 gets a live person on the phone right away, not a voicemail queue.
Many simple hardware repairs don’t require a permit, but a new driveway gate or a new operator loop often does. We can tell you what the city’s current requirements are when we quote the job, and the written estimate will say clearly which phase needs a permit before any work starts.
Yes. We respect quiet hours and can often schedule drilling and grinding for the window that works best for your household – kids asleep or not. We use quiet tools where there’s a choice, and we finish with a cleanup photo before we leave so you can see the condition we left your driveway.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Compton Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco