Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Compton
Electric gate repair in Compton usually means one of two things: a motor that burned out under a gate that’s heavier than it looks, or a hinge post that’s leaning because the concrete driveway settled decades ago. Most Compton repairs we handle run between $220 and $680 depending on whether it’s a gearbox, a control board, or a full operator replacement. We work on the aging wrought-iron security gates that define this city’s streets, and we’ll give you a written price before any work begins. Call (626) 649-4572 and a live person answers, day or night.
You won’t get a voicemail queue. You’ll get a technician who knows Compton’s housing stock, who has seen your exact gate a hundred times on a hundred other lots off Rosecrans and Alameda, and who will tell you honestly whether that 1990s iron frame is worth saving. Most of the time it is.
Key Takeaways:
- Most electric gate repairs in Compton run $220-$680, with full operator swaps at the higher end
- We service LiftMaster, Viking, Ghost Controls, DoorKing, Elite, FAAC, BFT, and Linear operators
- Written price before we touch anything, shoe covers and drop cloths inside your home, cleanup photo before we leave
- 365-Day Done Right Promise on every repair and installation
Why Latch & Post Gate Repair Is Compton’s Preferred Electric Gate Repair Company
Compton isn’t a city where you trust just anyone with your gate. Your gate is your first line of defense, and when it won’t open or close, the whole rhythm of your household stalls behind it. We get that. Our technicians are background-checked and uniformed, and they arrive in Compton understanding something out-of-area crews miss: the gates here aren’t like the gates in the Palisades or Pasadena. They’re older. They’re heavier. And they were built for a different era of the city.
We’re part of the Cedarwell family of independently owned gate specialists, founded in 2009. When we send a technician to a home off Wilmington Avenue or near a school off Rosecrans, that technician works to the Cedarwell C.A.R.E. values: clean up like it’s our own home, ask before we move or touch anything, respect your time and quiet hours, and explain the price before the work. Those aren’t slogans. They’re a written routine every technician follows.
We also stock common parts for Compton’s most common operators, so a Viking or LiftMaster gearbox swap doesn’t mean waiting a week for a part to ship from a warehouse in another state. That matters when your car is stuck behind a gate that won’t open.
Electric Gate Motor in Compton
Electric Gate Motor repair in Compton is the single most common call we take, and for a very specific local reason: many of these gates carry far more weight than their original motors were ever rated to handle. When a homeowner welded extra security bars onto a 1996 iron frame back in the day, that gate gained forty or fifty pounds. The motor didn’t. Something has to give, and it’s usually the gearbox or the capacitor.
A motor repair in Compton typically runs $250-$550. That covers diagnosing the operator, replacing worn gears or the capacitor, re-aligning the limit switches, and testing the full cycle under load. If the motor itself is burned out and needs a full swap, you’re looking at $450-$850 depending on whether you’re replacing with a comparable LiftMaster or upgrading to a heavier-duty Viking rated for a layered gate.
Gearbox and Capacitor Repairs
On the older operators we see across Compton, the gearbox fails first. Stripped gears whine, then grind, then freeze the gate mid-swing. On a narrow lot off Willowbrook Avenue, we serviced a 1996 wrought-iron double swing gate that a homeowner had beefed up with welded security bars; the original LiftMaster operator was burning out its gearbox under the extra weight. We replaced the stripped gears, installed a Viking heavy-duty operator rated for the new load, and repaired the hinge post footing that was causing sag. We also added a safety photocell and keypad entry that had been missing since the 1990s install.
Capacitor failures show up differently: the gate hums but doesn’t move. That’s a $180-$300 fix in most Compton cases, and it’s one we can usually complete in a single visit.
Limit Switch and Travel Adjustment
When a gate stops partway, or slams into the post, or reverses for no clear reason, the limit switches have drifted. This is a calibration issue, not a death sentence for the operator. We adjust the travel limits, check the force settings, and run the gate through ten full cycles to confirm it opens and closes cleanly. This runs $150-$240 and takes under an hour on most Compton properties.
Gate Access Control in Compton
Gate Access Control in Compton is about two different generations of hardware: the keypad and remote systems installed in the 1990s, and the smartphone and intercom retrofits families are adding today. Older keypads corrode from marine-layer moisture and stop reading codes. Older remotes drift off frequency. And older access control boards, especially on multi-tenant rental properties near the Compton Civic Center, get patched and repatched until the wiring looks like a bowl of noodles.
Access control repair on a Compton home typically runs $180-$400 for keypad and remote receiver work, and $350-$700 if you’re upgrading to a modern system with smartphone access and a camera intercom. We’ll tell you if the existing board is worth repairing or if a retrofit makes more sense for your long-term costs.
Keypad and Intercom Systems
A keypad that won’t respond, or works only when you press the buttons a certain way, usually needs a new membrane or a full keypad replacement. We carry replacement keypads for the brands Compton homeowners actually own, including DoorKing and Elite. On properties with intercoms, we test the wiring from the house to the gate, not just the handset, because on these older bungalows the buried wire is often the real culprit.
Remote Control and Safety Sensor Repair
Remotes that worked yesterday and don’t work today are rarely the remote’s fault. Usually it’s the receiver board on the operator. We test with a known-good remote before we tell you to buy anything. Safety sensors, which California law requires on every automatic gate, fail quietly: leaves and dirt build up, the photo eye misaligns, and the gate starts beeping and refusing to close. That’s a $120-$220 fix in Compton, and it’s one we treat as urgent because a gate without working sensors is dangerous to anyone near it, especially kids and pets.
Trusted Brands We Service in Compton
We’re factory-trained on the brands families actually own in this city, and we don’t send a technician out to learn on your gate. The operators we see most often in Compton are LiftMaster and Linear from the original 1990s installs, with Viking and DoorKing common on the heavier layered gates and the handful of multi-tenant driveways near the Compton Fashion Center. We also service Ghost Controls, Elite, FAAC, BFT, and Mighty Mule. Because we stock parts locally for these brands, many repairs are completed same-visit rather than after a second trip. When you combine that with a written price before work and the 365-Day Done Right Promise, the math works in your favor.
Common Electric Gate Repair Problems We See in Compton Homes
- Layered gates overloading the operator: Extra security bars welded or bolted onto original 1990s iron frames double the gate weight, burning out motors and stripping gears on gates that look standard from the street. If your gate was “reinforced” at some point in its life, tell us on the call. It changes which operator we recommend.
- Hinge post rot and footing settlement: On narrow post-WWII lots, original concrete driveways have settled and cracked over decades. The hinge post leans, and the gate sags at the post instead of the panel. We often have to repair the footing, not just the operator, to stop the repeat failures.
- Corrosion at welds and hinge points: Compton sits roughly 10 to 12 miles inland, which means daily marine-layer moisture settling on iron, then Santa Ana winds cracking the paint and exposing bare metal to the next moisture cycle. The rust-repair-repaint loop on these properties is a cycle we know well.
- Obsolete safety systems from the 1990s: Many original Compton gate installations either never got safety photocells or had them added incorrectly. A gate without working safety sensors is a genuine hazard, and we treat sensor repair as a same-day priority when possible.
Pricing for Electric Gate Repair in Compton, CA
You deserve a straight answer on what this will cost. Here is what we see in Compton as of 2026. A keypad or remote receiver repair runs $180-$400. A safety sensor replacement or realignment runs $120-$220. A gearbox or capacitor repair runs $250-$550. A full operator replacement, including the motor and all new hardware, runs $450-$850 depending on the weight of your gate and whether you want a standard or heavy-duty unit. Access control retrofits with smartphone capability run $350-$700.
What affects the number: how much your gate actually weighs, whether the hinge post needs footing work, and whether your existing wiring can be reused. The price we quote you is the price you pay, in writing, before any work begins. No pressure. Call (626) 649-4572 for a free estimate, and we’ll give you exact numbers for your gate, not a vague range somebody guessed at.
We Also Serve Cities Near Compton
Our Compton customers often have family or investment properties in the neighboring cities, so we regularly work in Gardena, Carson, Lynwood, and Paramount. If you live just over the city line, you’ll get the same written price, the same cleanup routine, and the same 365-Day Done Right Promise. We covered more on the area at our Electric Gate Repair in Compton overview. For the full scope of our gate work, see Electric Gate Repair.
Serving Compton, CA - Our Local Coverage Area
We’re based in the Compton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Compton
In most cases we repair the original gate. Wrought iron from the 1990s Compton security wave is dense, serviceable steel, and the problems are almost always the operator, the hinge post footing, or the welds, not the frame itself. A full gate replacement runs $1,800-$4,500 and is usually unnecessary. We’ll only recommend replacement if the frame is so corroded it has lost structural integrity, which happens but is less common than you would think. Call (626) 649-4572 and we’ll tell you which camp your gate falls into.
It is almost certainly a layered gate. This is the signature Compton problem: an original 1990s iron frame that someone welded or bolted extra security bars onto at some point in the last three decades. The gate looks standard from the street, but it weighs far more than the operator was rated for, so the motor burns out or the gears strip every few years. The fix is a heavier-duty operator sized for the actual weight, not another motor of the same rating. We’ll weigh and measure before we recommend anything. Call (626) 649-4572 to schedule a diagnostic.
Yes. On Compton lots where the driveway is far from the house panel, or where trenching a power run would mean cutting through a settled concrete driveway, a solar-powered operator is often the right call. Viking and Ghost Controls both make solar-ready operators that handle wrought-iron gates well. A solar setup with battery backup typically runs $800-$1,400 in Compton, installed and configured. Call (626) 649-4572 for an exact quote.
Because the problem is not the gate panel, it’s the footing under the hinge post. On Compton’s post-WWII bungalows and small ranch homes, the original concrete driveways were poured in the 1940s through 1960s and have settled and cracked over the decades. The hinge post leans, the gate drops, and the latch side drags. We repair the post footing, re-set the hinge, and square the gate before we touch the operator. Footing work typically runs $300-$700 in Compton. Call (626) 649-4572 for an assessment.
Yes. California law requires automatic gates to have working safety sensors that stop and reverse the gate if a person, pet, or vehicle is in the path. Many Compton gates installed in the 1990s either never had sensors or had them added incorrectly. We install and align safety photocells on every gate we service, and we will flag a non-compliant gate the moment we see it. Sensor work runs $120-$220 in Compton. Call (626) 649-4572 and we’ll get your gate compliant.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Compton since 2009.