Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Irving
Most electric gate failures in Irving come down to one of two things: a post that has shifted out of square on Blackland Prairie clay, or an operator that has simply given out after years of daily cycles. We fix both, and we quote the price in writing before any work begins. If your gate is dragging, refusing to latch, or the opener hums without moving, call Latch & Post Gate Repair at (626) 649-4572. We answer live, around the clock, and we know Irving’s gate systems better than anyone driving in from across the metro.
Our Electric Gate Repair team works on the two gate ecosystems that define this city: the high-cycle commercial slide gates across Las Colinas and the decorative HOA swing gates in neighborhoods like Hackberry Creek and Cottonhill. That split matters because the fix is rarely the same. A residential swing gate in north Irving that drags after a wet spring is usually a footing problem. A campus slide gate that quits mid-day is usually an operator problem. We diagnose both on the first visit.
Why Latch & Post Gate Repair Is Irving’s Preferred Electric Gate Repair Company
We have been part of the Cedarwell family since 2009, and our Irving customers keep calling us back because the price we quote is the price they pay. Every visit starts with a written price delivered before any tools come off the truck. No pressure, no fine print, no discovering the real number after the gate is half apart.
Our technicians arrive in uniform, background-checked, and trained on the brands families around Irving actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite. Inside your home or garage, we put on shoe covers and lay drop cloths before we step anywhere. Before we leave, you get a photo of the clean-up. That is the Cedarwell C.A.R.E. routine: clean up like it is our own home, ask before we move anything, respect your time and your quiet hours, and explain the price before the work. If you have a sleeping baby or a nervous dog, we can schedule around nap time and choose pet-safe lubricants where there is a choice.
The 365-Day Done Right Promise covers every repair and installation we perform. If it is not right, we make it right. No argument, no fine print.
Gate Opener Repair in Irving
Gate Opener Repair in Irving usually means one of three jobs: a limit switch that has drifted, a gear or belt that has stripped, or a control board that has given out. In older Irving neighborhoods with 1950s to 1970s homes, we also see openers that are simply exhausted: the motor still runs, but decades of soil movement and misaligned hinges have made the opener work harder every single cycle until something inside fails. A standard opener repair in Irving runs $160 to $350, depending on what we find. The exact number will be in your written quote before we begin.
Limit switches and travel settings
When a gate stops short, swings past its post, or reverses for no obvious reason, the limit switches are the usual suspect. They tell the operator where to stop. North Texas temperature swings and years of vibration knock them out of adjustment. This repair is usually quick and affordable.
Gears, belts, and drive systems
Irving gates live outside in heat, dust, and humidity. Plastic drive gears and belts age faster here than in cooler climates. When a gear strips, the motor will hum but the gate will not move. We stock common drive parts for the brands we service, which means most Irving repairs happen the same day.
Automatic Gate Repair in Irving
Automatic Gate Repair in Irving covers the full system, not just the motor. The opener, the safety photocells, the loop detectors under the concrete, the keypad, the remote receiver, and the control board all need to talk to each other. When any one part fails, the whole gate stops behaving. A full-system automatic gate repair in Irving typically runs $220 to $480, with loop detectors and control boards on the higher end because of the digging and wiring involved.
Safety photocells and entrapment protection
Modern automatic gates in Irving are required to stop and reverse when something breaks the photocell beam. A gate in an older north or west Irving neighborhood may have been hung before current safety standards existed, with photocells that have drifted out of alignment after years of post movement. We can realign or replace them and bring the system up to current entrapment protection requirements. This matters if kids or pets use the driveway.
Loop detectors and vehicle sensors
In Las Colinas and other Irving neighborhoods with heavier traffic, a failed loop detector often looks like an operator problem. The gate stays open too long, or it closes on a car, or it refuses to open at all. Loop detectors are buried in the concrete and do fail over time. We test them before quoting any operator replacement so you do not pay for a part you do not need.
Trusted Brands We Service in Irving
We are factory-trained on the brands Irving homeowners and property managers actually run, including Viking, Ghost Controls, and DoorKing, along with LiftMaster, FAAC, BFT, Linear, Elite, and Mighty Mule. Because we service Las Colinas campus gates and HOA systems in the same week, we keep common boards, remotes, and photo-eyes on our trucks. That means fewer second trips and faster turnarounds for Irving customers. If your operator is a first-generation unit from the 1990s or early 2000s, ask us about retrofit options before assuming the whole opener has to go to a landfill.
Common Electric Gate Repair Problems We See in Irving Homes
- Gate drags on the ground after rain. Blackland Prairie clay swells with seasonal rain and shrinks in summer drought. Hinge posts lean out of plumb, and the gate drags. We reset the post footing and correct the sag rather than forcing the opener to fight it.
- Opener trips mid-cycle for no clear reason. Often the operator arm geometry is off because the post shifted. In Hackberry Creek we took a call on a decorative swing gate whose opener kept tripping mid-cycle; the panel had been shimmed twice before, and the real fault was the hinge post leaning after a wet spring, so we reset the post footing, corrected the sag, and re-set the operator arm geometry.
- Control board dead on an older HOA gate. Las Colinas-era subdivisions installed automated gate systems as a standard amenity in the 1980s through 2000s. Those first-generation boards are scarce now. We can often fit an R-board retrofit instead of replacing the whole operator.
- Operator burned out on a Las Colinas campus gate. Some campus slide gates cycle hundreds of times per day. A few days after the Hackberry Creek job we were in Las Colinas at a campus slide gate where a rack and pinion drive and loop detector were fine but a LiftMaster SL3000 had been cooked by hundreds of daily cycles. That one needed a commercial-duty operator rather than another rebuild.
Pricing for Electric Gate Repair in Irving, TX
We Also Serve Cities Near Irving
Our Irving crews regularly run repair routes into Dallas, Balch Springs, Hutchins, and Mesquite. If you manage a gate in one of those cities, call the same number and we will put you on the schedule.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Irving
In Irving, a gate that drags is usually a post problem, not an operator problem. Blackland Prairie clay swells after rain and shrinks in drought, pushing hinge posts out of plumb so the gate binds and drags. We diagnose the post before touching the operator, because replacing an opener when the footing is the real fault is wasted money. Call (626) 649-4572 for a free assessment.
An automatic gate in Irving must stop and reverse when its safety photocells detect an obstruction, and it must limit the closing force so it cannot injure a child or pet. Gates installed before modern standards existed often lack proper photocells or have misaligned ones. We can retrofit entrapment protection to bring an older Irving gate up to current requirements, or discuss Gate Installation - Irving if a full replacement is needed.
Las Colinas campus gates cycle hundreds of times per day, which is far beyond what a standard residential-grade operator like a LiftMaster SL3000 is designed to handle. Manufacturer cycle ratings assume a handful of openings per day, not a constant stream of cars. Experienced Irving technicians specify commercial-duty operators from the start instead of letting the client repeat repairs on undersized equipment.
Obsolete operators from the 1980s through early 2000s can often be retrofitted with an R-board instead of being replaced outright. This is a good option when the motor and drive are still solid but the control board is dead and original boards are discontinued. A retrofit in Irving runs $280 to $600, roughly half the cost of a full operator replacement. We will tell you honestly which route makes sense for your gate.
Yes. Our Electric Gate Repair team handles decorative swing gates in HOA subdivisions like Hackberry Creek and Cottonhill as well as high-cycle slide gates at Las Colinas corporate campuses. The diagnosis and the parts are different, but the standard is the same: written price first, clean work, and a one-year promise on everything.
Call Latch & Post Gate Repair for Electric Gate Repair in Irving
If your gate is dragging, refusing to latch, or the opener is acting up, call us at (626) 649-4572. A live person answers, day or night. We will schedule a time that works for your family, give you a free written estimate, and treat your home the way we would treat our own. Cody Beckman leads our team, and he stands behind every repair with the 365-Day Done Right Promise. If it is not right, we make it right.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Irving and the Dallas-Fort Worth metro.