Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Irving, TX
Gate repair in Irving, TX draws on two very different worlds: the high-cycle commercial slide gates of Las Colinas office parks and the decorative swing gates of established HOA neighborhoods like Hackberry Creek. Latch & Post Gate Repair handles both, with technicians factory-trained on Viking, Ghost Controls, DoorKing, and Elite equipment. Irving’s black clay soil and aging 1980s-era automated systems mean most calls involve more than a snapped hinge; they involve posts that have shifted out of square. Call (626) 649-4572 and a live person answers, day or night.
Why Irving Homes Are Different
Irving sits on the Blackland Prairie, where expansive clay soil swells after rain and shrinks hard in summer drought. That movement never stops, and it pushes gate posts out of plumb in ways a fresh coat of paint won’t fix. A gate that dragged last week may suddenly latch cleanly after a dry spell, then bind again after the next storm. Repair work here often means re-setting posts, shimming hinges, or re-hanging the gate leaf, not just swapping a latch.
The housing stock adds another layer. Older 1950s and 1970s neighborhoods in north and west Irving still carry original ornamental iron fencing, much of it rusted at the base or shifted over decades. The 1980s and 1990s HOA subdivisions built into Las Colinas installed automated gate systems as a standard amenity, and those systems are now entering their first major hardware replacement cycle. Technicians working Irving need to know both generations of equipment, and they need to understand how HOAs in Cottonhill and Hackberry Creek regulate gate appearance and operation.
Our Main Irving Services
Most Irving homeowners call us for one of three things: a gate that won’t close, a gate they’d like replaced, or an electric operator that stopped responding. Each has its own Irving page with local pricing and details.
Gate Repair in Irving
Repair calls in Irving usually trace back to clay soil movement, corroded posts, or worn hinges on older ornamental iron. We inspect the post, the hinges, the latch, and the gate’s alignment before quoting anything. What looks like a bad latch often turns out to be a post that’s drifted out of square. We quote a written price before any work starts, and we leave your floors protected with drop cloths and shoe covers. Read the full breakdown on our Gate Repair in Irving page.
Gate Installation in Irving
Most new installations in Irving go into either Las Colinas-era HOA communities or older lots where original fencing has reached the end of its life. We measure, order, and schedule deliberately, because a gate hung in shifting clay needs a post foundation that accounts for soil movement. Every install includes a written price before we begin and the 365-Day Done Right Promise. Homeowners in Hackberry Creek and Cottonhill often ask about matching existing HOA style guides, and we work within those. See Gate Installation in Irving for details.
Electric Gate Repair in Irving
Electric gate calls in Irving split between residential swing operators and the high-cycle slide gates at corporate campuses. A LiftMaster SL3000 rated for residential use may fail early when asked to cycle hundreds of times daily at a Las Colinas office park. We spec commercial-duty operators where the duty cycle demands it, and we’re trained on Viking, Ghost Controls, DoorKing, and Elite systems. Every repair begins with a diagnostic and a written quote. Our Electric Gate Repair in Irving page covers pricing and response times.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Irving
We service operators and hardware from Viking, Ghost Controls, DoorKing, and Elite, with common parts stocked locally or available next-day from our Dallas-Fort Worth supply chain. That means fewer second trips and less waiting. See our brands for the full list of equipment we support.
Pricing for Gate Company in Irving, TX
| Service | Typical range in Irving |
|---|---|
| Gate latch replacement | $180 - $340 |
| Gate hinge replacement | $220 - $400 per pair |
| Post re-setting (clay soil shift) | $350 - $700 per post |
| Ornamental iron section repair | $300 - $800 per section |
| Residential operator replacement | $850 - $1,400 |
| Commercial slide gate operator | $2,200 - $4,500 |
| New standard driveway gate install | $1,800 - $3,500 |
| New ornamental iron gate install | $2,500 - $5,200 |
| Electric gate diagnostic call | $120 - $200 |
Soil correction work pushes prices up in Irving; if a post needs deep concrete footings to resist clay movement, that labor and material shows up in the quote. What it never does is surprise you later, because every job gets a written price before we touch anything.
Neighborhoods We Serve in Irving
We work across Irving, from the older north and west neighborhoods to the Las Colinas corridor and the HOA communities around it. Most repair calls draw a same-day or next-day visit depending on crew routing.
- Hackberry Creek
- Cottonhill
- Las Colinas
- North Irving
- West Irving
Service Area – Cities Near Irving
Latch & Post Gate Repair serves Irving locally, with scheduling coordinated from our Dallas-Fort Worth office. We also cover Dallas, TX, Balch Springs, TX, Hutchins, TX, and we can route crews toward Mesquite, NV for certain projects. Call us and a live person will tell you exactly when we can arrive.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Irving
Most Irving repair calls are reached same day or next morning. We keep crews routed through the Dallas-Fort Worth metro, and a live person answers the phone around the clock to schedule your visit. For a gate that won’t close and leaves your yard unsecured, call (626) 649-4572 and we’ll give you a straight arrival window.
Many Las Colinas-era HOAs, including Hackberry Creek and Cottonhill, require written approval before a gate’s style, color, or operator changes. Repairs that restore the existing gate to its original condition typically do not. We can provide the spec sheet your HOA board asks for and match existing neighborhood finishes. Call us to talk through your community’s requirements.
Yes. Every visit includes shoe covers and drop cloths inside the home, and we photograph the clean-up before leaving. We also choose pet-safe lubricants where there’s a choice and can schedule around nap time if quiet matters. That’s part of the Cedarwell C.A.R.E. routine on every Irving job, at no extra charge.
If your gate is dragging, failing to latch, or dead at the keypad, call Latch & Post Gate Repair at (626) 649-4572. A live person answers, we’ll schedule a visit that works for your household, and you’ll get a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Irving Customers Say
"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon