Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Fresno
Electric gate repair in Fresno typically runs $180 to $680 depending on the failure, and most opener and control board jobs are completed the same day we diagnose them. If your gate has stopped opening, grinds mid-travel, or the keypad stopped accepting codes after a stretch of Tule fog, we can usually have a technician at your Fresno home within hours, not days. Call (626) 649-4572 and a live person answers, around the clock, every day.
We work on gates all over Fresno, from the Woodward Park corridor to the older southeast-side neighborhoods, and we know this city’s gates fail differently than gates in coastal California. More on that below. For now, know this: we show up in uniform, we put shoe covers on before we step inside your garage or entry, and we hand you a written price before any tool comes out of the truck.
Why Latch & Post Gate Repair Is Fresno’s Preferred Electric Gate Repair Company
We’re the Electric Gate Repair team at Latch & Post, part of the Cedarwell family of independently owned and operated gate specialists. We’ve been repairing gates since 2009, and in Fresno specifically, that means we’ve seen how the San Joaquin Valley’s clay soil and winter fog create failures most gate companies never anticipate. Our technicians are background-checked and factory-trained on the brands Fresno homeowners actually own. Every repair and installation is covered by the 365-Day Done Right Promise: if it isn’t right, we make it right, no argument and no fine print.
We’ve earned a strong local reputation in Fresno by doing the unglamorous work well: probing post depth on every service call, drying out circuit boards after fog season, and telling homeowners honestly when a retrofit makes more sense than a new operator. Customers around Fresno consistently mention two things: the written price before work starts, and the cleanup photo before we leave. Shoe covers and drop cloths are standard on every visit, not an upsell. Your floors stay clean, and you’ll see the proof before we pull out of the driveway.
Gate Opener Repair in Fresno
Gate opener repair in Fresno is the service we perform most often, and it’s where our local soil knowledge matters most. When the 4-inch steel post supporting your swing gate heaves an inch or more out of plumb during a wet season, your opener has to fight that misalignment every single cycle. The motor works harder, the board runs hotter, and eventually something gives: usually the capacitor, the limit switch, or the control board itself. We diagnose the opener and the footing together, because fixing one without checking the other is how you end up with a repeat call in six months.
Opener Diagnostics and Motor Replacement
Most opener diagnostics in Fresno run $89 to $149, and the written diagnosis includes the repair plan and exact price before we order or install anything. A standard opener motor replacement starts around $320 and goes up from there based on brand and gate weight. We stock parts for Linear and Ghost Controls locally, which keeps turnaround fast for Fresno customers.
Control Board and Keypad Repair
Control board failures spike in Fresno between November and February, and it’s not something most homeowners see coming. Tule fog settles moisture onto circuit boards that sit inside operator housings, and that moisture corrodes contacts over weeks, not years. Board replacement or rebuild ranges from $180 to $450 depending on the operator model, and we seal and reseat the board so it can survive the next fog season. Keypad entry pad repair runs $95 to $240 and often involves cleaning or replacing the membrane contacts that fog and irrigation humidity have degraded.
Automatic Gate Repair in Fresno
Automatic gate repair in Fresno means diagnosing the whole system, not just the part that stopped working. Every automatic gate has an operator, a control board, safety sensors or photocells, a keypad or remote receiver, and the physical gate and posts that carry all of it. When one element fails, it often stresses the others. Our job is to find the root cause, fix it, and tell you plainly what can wait and what can’t.
Safety Sensor and Loop Detector Repair
Fresno’s master-planned communities, especially along the Woodward Park corridor and in the Copper River Ranch area, run shared automatic entry systems that depend on loop detectors buried in the pavement. When those loops crack or shift due to soil movement, the gate stops responding to approaching cars or reverses unpredictably. Safety sensor and loop detector repair in Fresno ranges from $160 to $480. If you’re in a gated community, we coordinate with your HOA on shared equipment and access.
Remote and Receiver Troubleshooting
Remote control repair often looks like a dead remote, but the receiver or its antenna is just as likely the culprit after a hot Fresno summer or a damp fog winter. We test both ends before quoting anything. Most remote and receiver jobs run $85 to $220, including reprogramming all remotes and keypads so your system works as one unit again.
On every automatic gate repair, we follow the Cedarwell C.A.R.E. values: Clean up like it’s our own home; Ask before we move or touch anything; Respect your time and quiet hours; Explain the price before the work. If you need us to schedule around nap time or keep tools quiet because a baby is sleeping, tell the person who answers the phone and we’ll note it on the work order.
Trusted Brands We Service in Fresno
We’re factory-trained on the equipment families actually have around Fresno: Linear, Viking, Ghost Controls, and DoorKing are the names we see most often on gates hung in the 1990s and 2000s. We also service LiftMaster, FAAC, BFT, and Elite. Because we know these systems, we keep common boards, sensors, and receivers stocked locally, which means a Fresno repair doesn’t stall for a week waiting on a part from a warehouse. When a part isn’t stocked, we give you the honest lead time before you agree to anything.
Common Electric Gate Repair Problems We See in Fresno Homes
- Clay-soil post heaving in southeast Fresno and canal-adjacent yards. The soil expands during winter irrigation and the ag water-table swings, then shrinks hard in summer. A 4-inch steel post can move laterally by an inch or more in one wet season, skewing the gate enough to jam the latch or drag mid-travel. Customers blame the opener, but the footing is the root cause, and we probe post depth on every call in these neighborhoods.
- Tule fog corrosion on control boards and keypads. From November through February, persistent fog moisture condenses on circuit boards, keypad membranes, and hinge pins. Contacts corrode and legacy boards throw fault codes in a city where nobody expects corrosion because it barely rains. We dry, clean, and reseat boards, and we use corrosion-resistant contact treatment where it makes sense.
- Thermal binding on west-facing slide gates in 105 to 115 degree summers. Steel expands in the heat, and a slide gate on a west-facing track can bind mid-afternoon even though it ran fine at 8 a.m. We check track alignment and thermal clearances, and sometimes re-shim the rack and pinion drive so the gate moves freely at full summer temperature.
- Legacy systems hung before modern safety requirements. Many Fresno gates date to the 1980s and 1990s suburban build-out. They lack modern photocells, reversing edges, or compliant spacing, and the control boards may be obsolete. We give you an honest retrofit-versus-replace answer, with real numbers, not a sales script.
Pricing for Electric Gate Repair in Fresno, CA
You’ll get a written price before we start any work, every single visit. That’s standard for us, not an option. For context on typical Fresno job ranges: gate opener diagnostics run $89 to $149, control board repair or replacement runs $180 to $450, safety sensor or loop detector repair runs $160 to $480, remote and receiver work runs $85 to $220, and a full operator motor replacement starts around $320. Heavy custom gates, ranch equipment, and shared-community systems can run higher, and we’ll show you the exact number before anything begins. Estimates are free, and there’s no pressure to accept.
We Also Serve Cities Near Fresno
Beyond Fresno, our technicians regularly work in Clovis, Madera, Sanger, and Fowler. If you live in one of those communities and need electric gate service, call (626) 649-4572 and we’ll coordinate scheduling directly. Our Electric Gate Repair in Fresno team covers the wider Central Valley with the same written price and cleanup guarantee.
Serving Fresno, CA - Our Local Coverage Area
We’re based in the Fresno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Fresno
Because the clay soil under your gate posts is expanding with winter irrigation and the seasonal water-table rise. In southeast Fresno and anywhere near irrigation canals, that expansion can heave a 4-inch steel post an inch or more out of plumb in a single wet season. The gate drags, the latch jams, and the opener strains against the misalignment. We fix the footing and the hinge alignment, not just the symptom. Call (626) 649-4572 for an exact diagnosis and written price.
Yes. Fresno’s Tule fog puts persistent moisture onto operator circuit boards from November through February, and that moisture corrodes contacts even though the city gets little actual rainfall. It surprises customers because it feels like a desert climate, but the fog is real and it’s hard on electronics. We dry, clean, and reseat the board, and we can often save a board that’s faulting intermittently rather than replacing it outright. Board repair or replacement in Fresno runs $180 to $450.
Often it can be retrofitted. We’ve added modern photocells and reversing edges to gates hung in the 1990s without replacing the operator, and we’ll tell you honestly when the control board is too obsolete to support those safety additions. When replacement is cheaper than retrofit over a five-year horizon, we say so and show you the numbers for both paths. The written quote covers exactly what you choose, never a surprise upgrade.
Thermal expansion is what’s happening. Fresno afternoons at 105 to 115 degrees cause the steel rail or gate frame to expand and bind, especially on west-facing slide gates. The gate that ran clean at 8 a.m. binds by 3 p.m. because the track clearance was set too tight for genuine Valley heat. We open the thermal clearance and re-align the drive, and the mid-afternoon stall disappears. Call (626) 649-4572 for a free estimate on slide gate repair.
We do. Communities along the Woodward Park corridor and in the Copper River Ranch area have shared entry systems with loop detectors, keypads, and operator electronics that need periodic service, and we coordinate directly with HOA boards and property managers. The work is billed transparently and the same cleanup standard applies, even though it’s a shared gate rather than a private driveway. When the loop detector cracks from soil movement under the pavement, we can diagnose and repair or replace it.
Why Fresno Gates Fail Differently, and What We Do About It
Here’s what most gate companies don’t tell you about Fresno, and it’s the reason we probe post depth on nearly every electric gate repair we do. The city sits on deep alluvial clay that expands dramatically during winter irrigation and the agricultural water-table fluctuations, then shrinks hard in the bone-dry summer. In southeast-side neighborhoods and on any property near an active irrigation canal, that cycle can displace a 4-inch steel gate post laterally by over an inch in a single wet season. The gate goes out of plumb, the swing arm drags, the latch jams, and the opener trips or burns out trying to fight it. Coastal California cities rarely see this failure mode. We see it weekly.
Add the Tule fog to that and you get the second signature Fresno failure: circuit board corrosion. The fog sits on the Valley floor from November through February, among the densest in the nation, and it deposits moisture on operator boards, keypad membranes, and hinge pins. In a low-rainfall city, customers never expect corrosion, and we regularly find legacy boards faulting because of it. That’s the Fresno reality: soil movement attacks the gate structure, fog attacks the electronics, and summer heat attacks the clearances.
We had one 1990s stucco-and-tile home off the Woodward Park corridor with a shared entry system. The LiftMaster swing gate operator was faulting intermittently after winter fog exposure, and the hinge post had heaved out of plumb. Every afternoon, as the west-facing steel expanded, the latch jammed. We reset and re-poured the post footing, re-shimmed the hinges, dried and reseated the control board, then re-aimed the loop detector and safety photocells. That gate has run without a jam through two full wet seasons since. That’s the job: fix the footing, the electronics, and the safety system together, not one part at a time.
Call Latch & Post Gate Repair for Electric Gate Service in Fresno
If your electric gate is jamming, stalling, faulting, or dead, call us. A live person answers at (626) 649-4572, day or night, weekends and holidays included. We’ll talk through what you’re seeing, schedule a visit that fits your family’s routine, and hand you a written price before any work begins. Estimates are free. The 365-Day Done Right Promise covers every repair and installation we do in Fresno.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Fresno since 2009.