Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Cibolo
Electric gate repair in Cibolo typically runs $180 to $640 depending on whether we’re replacing a safety sensor, rebuilding a hinge post footing, or swapping a control board. Most calls in Cibolo get a same-day or next-day visit because our San Antonio-based dispatch coordinates crews who work Cibolo neighborhoods daily. Call (626) 649-4572 and a live person answers, 24 hours a day. We’ll give you a written price before any work starts, always.
Why Latch & Post Gate Repair Is Cibolo’s Preferred Electric Gate Repair Company
Since 2009, Latch & Post Gate Repair has operated as part of the Cedarwell family of independently owned gate specialists. Cody Beckman leads our team, and every technician who arrives at a Cibolo home is background-checked, uniformed, and factory-trained on the brands families around here actually own. We focus on one trade: gates. The latch that holds them and the post that carries them. That narrow focus means we know exactly what fails on an ornamental iron driveway gate in Saddle Creek after a wet spring, because we’ve repaired it dozens of times.
Our Electric Gate Repair team works under the Cedarwell C.A.R.E. values, and that changes how a repair visit feels. Shoe covers go on before we step inside. Drop cloths protect your floors when we carry a gate operator through the house to the backyard. We ask before moving anything near the gate. And before we leave, we take a photo of the clean-up so you can see exactly how we left your property. That routine is non-negotiable, not an upsell. Every repair and installation is covered by our 365-Day Done Right Promise: if it isn’t right, we make it right. No argument, no fine print. That promise applies to every Cibolo job we complete.
Electric Gate Motor in Cibolo
Electric gate motor repair in Cibolo often starts with the same root cause: a gate that has gone out of plumb from clay soil movement, forcing the motor to work harder than it was ever designed to. A LiftMaster or FAAC swing gate operator that strains against a binding hinge will burn out its capacitor or strip its internal gears within a season. We don’t just swap the motor. We check the post footing, the hinge alignment, and the travel limits together, so the new motor isn’t fighting the same losing battle.
What a motor diagnosis looks like
We test the control board output first, then the capacitor and the motor’s amp draw while the gate cycles. On a Viking or DoorKing operator in Cibolo, we often find that the motor itself is fine but the rack and pinion has seized because galvanized steel hardware corroded faster than expected in Gulf moisture. Replacing the motor when the rack was the failure would waste your money.
Motor replacement costs
A swing gate motor replacement in Cibolo typically runs $380 to $640 including labor, depending on whether we’re installing a LiftMaster, FAAC, or Viking unit. You’ll see the exact number in writing before we touch anything.
Gate Access Control in Cibolo
Gate access control repair in Cibolo means fixing the keypads, remote receivers, loop detectors, and safety photocells that tell your gate when to open and when to stop. In a dense HOA subdivision like Turning Stone, a keypad that shorts out after a rainy stretch isn’t just annoying. It means you’re getting out of the car to punch a code six times a day, and your kids can’t get the gate open when they come home from school.
Keypads and remotes
Most keypad failures we see in Cibolo come from moisture intrusion. A Linear or Ghost Controls keypad that wasn’t sealed properly at install will develop corroded contact points within two or three years of heavy Gulf moisture exposure. We replace the gasket, not just the keypad, so the next one lasts.
Safety photocells and loop detectors
If your gate reverses for no reason or refuses to close, the safety photocell is the first suspect. These units sit at knee height near the gate path, which in Cibolo means they take direct splash from rain and sprinkler overspray. A photocell alignment or replacement usually runs $145 to $220. Most families want us to test this whenever we’re on site, and we’re happy to, since a gate that won’t auto-reverse is a genuine injury risk to kids and pets.
Trusted Brands We Service in Cibolo
Our technicians are factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Cibolo specifically, we keep finish sample cards for the major HOA subdivisions on our trucks, so when we replace a DoorKing keypad or a Linear control board, the new hardware matches the CC&R-specified bronze or flat black palette the first time. We stock common replacement parts for these brands locally, which means a faster turnaround for Cibolo homeowners without waiting on a distributor shipment from out of state.
Common Electric Gate Repair Problems We See in Cibolo Homes
- Post heave from Blackland Prairie clay. Cibolo sits on expansive vertisol soil that swells after rain and cracks during drought. Gate posts lift, tilt, and pull gates out of alignment, which overstresses hinges and operator motors. We re-pour footings, not just adjust hinges, because a hinge adjustment on moving soil fails within months.
- HOA finish mismatch failures. In Saddle Creek, CrossVine, and Turning Stone, the CC&Rs specify exact powder-coat finishes. Installing functionally identical hardware in the wrong sheen triggers a violation notice. We match replacement parts to the subdivision’s registered color before we order, which avoids a second repair bill and an angry letter from the HOA.
- Corroded hinges and operator boards from Gulf moisture. Galvanized and painted steel hardware degrades faster in Cibolo’s humid air than it does in San Antonio’s drier western reaches. Rack and pinion binding and keypad shorts are the two most common symptoms. We use stainless steel fixings on coastal-facing work and recommend them for any Cibolo gate that sees afternoon humidity.
- Safety sensor failures after wet seasons. Heavy spring rains leave photocells and loop detectors waterlogged. A gate that reverses mid-cycle or stops closing entirely usually has a shorted sensor or a water-damaged loop connection. We test the full safety circuit before declaring the operator itself at fault.
Pricing for Electric Gate Repair in Cibolo, TX
Here are the numbers we quote most often for Cibolo work. A safety photocell alignment or replacement runs $145 to $220. A keypad replacement typically lands between $185 and $280. Remote receiver or remote programming problems run $95 to $175. A swing gate motor replacement, depending on brand, is $380 to $640. Control board replacement for a Viking or DoorKing unit runs $290 to $510. A full post footing re-pour with gate realignment starts around $500 and goes up based on the post size and the amount of concrete work involved. You’ll always see a written price before we start, and that number is what you pay. No upcharge for shoe covers, drop cloths, or the cleanup photo. Those are included on every visit, always.
We Also Serve Cities Near Cibolo
Our Cibolo crews regularly handle electric gate repair for neighbors in Schertz, Universal City, Converse, and New Braunfels. Each town has its own gate stock and soil profile, and our team knows the difference. If you’re a few miles outside Cibolo, call (626) 649-4572 and we’ll tell you honestly whether we can get to you same day.
Serving Cibolo, TX - Our Local Coverage Area
We’re based in the Cibolo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Cibolo
Cibolo sits directly on Blackland Prairie vertisol clay, which expands significantly after rain and shrinks when it dries out. That wet-dry cycle physically lifts gate posts out of the ground and shifts them out of plumb, which then throws off hinges, misaligns the gate leaf, and overloads the operator motor. San Antonio’s western limestone terrain doesn’t move anywhere near as much. In Cibolo, a hinge adjustment alone rarely holds; the footing must be re-poured for a lasting fix.
Call (626) 649-4572 for an exact quote. Estimates are free, and we’ll walk you through what your specific posts actually need.
Yes, and we do it routinely. Most Cibolo HOAs specify exact powder-coat finish colors and hardware palettes in their CC&Rs. Before we order any replacement part, we cross-reference the subdivision’s architectural guidelines. We keep finish sample cards for the major Cibolo HOAs, including Saddle Creek and Turning Stone, on our trucks. That’s the difference between passing inspection on the first try and getting flagged for a rework order.
Call (626) 649-4572. We’ll match your HOA’s spec before we order anything.
The primary cause in Cibolo is expansive clay soil pushing hinge posts out of alignment. Once the post tilts even a few degrees, the gate leaf drops, rubs against the ground or the latch post, and binds. The operator motor then works harder, which shortens its life. We reset the post footing in concrete, shim the hinges, and realign the gate so the operator isn’t fighting the structure.
Call (626) 649-4572 to have us look at your posts before the motor burns out.
Yes. Our technicians are factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts for these brands locally, which means a DoorKing control board or a FAAC motor swap in Cibolo doesn’t wait days for a distributor shipment. Most brand-specific repairs are quoted and completed in a single visit.
Call (626) 649-4572. We’ll tell you what’s in stock before we schedule.
The quick check is to place an object like a trash can directly in the gate’s path while it’s closing. The gate should stop and reverse immediately. If it doesn’t, the photocell is misaligned, dirty, or shorted. The transmitter and receiver need to sit level and unobstructed at the same height, which is easy to knock askew in Cibolo’s shifting soil. A photocell that doesn’t reverse is a real injury risk to kids and pets, so we test this on every Cibolo visit whether you ask or not.
If your gate isn’t reversing on obstruction, call (626) 649-4572. We’ll test and replace the sensor for between $145 and $220.
When your electric gate stops working in Cibolo, you want someone who shows up, gives you a straight number, and leaves your property cleaner than they found it. That’s what Latch & Post Gate Repair does, every visit. Call (626) 649-4572 now and a live person will answer. We’ll schedule a time that works for your family and send a Cibolo-savvy technician who knows your HOA’s finish spec and your soil’s habits. You’ll get a written price before any work begins, and every repair is covered for a full year by our 365-Day Done Right Promise.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Cibolo since 2009.