Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Schertz
Electric gate repair in Schertz usually costs between $185 and $540 depending on what failed, and most single-operator jobs are done in one visit. We work throughout Schertz every week, from the HOA communities off Wiederstein Road to the newer tracts along FM 1518, so our techs already know the gate hardware, soil conditions, and access quirks that define this city’s repair needs. If your gate is dragging, dead, or locked with a PIN nobody remembers, call (626) 649-4572 and a live person answers, day or night.
Schertz is a particular kind of place for gate work. The housing stock was built in a compressed window, mostly 2000s to 2020s tract construction, which means entire streets of ornamental-iron automated gates are now aging out together. Add the black clay soil underfoot and the steady PCS turnover near JBSA-Randolph, and you get a repair cycle that looks different here than it does twenty minutes away in San Antonio. We plan for that before the truck rolls.
Why Latch & Post Gate Repair Is Schertz’s Preferred Electric Gate Repair Company
Latch & Post Gate Repair is part of the Cedarwell family, operating since 2009 as an independently owned and operated gate specialist. We are not a general handyman service that occasionally touches a gate. Gate repair, gate installation, and Electric Gate Repair are what we do, every day, in Schertz and the surrounding communities.
Schertz homeowners call us because the on-site routine is as predictable as the price. Every visit starts with a written quote before any work begins, so you will see the exact dollar figure in advance, not after the fact. Our background-checked, uniformed technicians follow the Cedarwell C.A.R.E. values on every job: Clean up like it is our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, and Explain the price before the work. We lay drop cloths on the floor and put on shoe covers before we step inside. Before we leave, we take a photo of the clean-up so you can see exactly how the work area was left.
Schertz families with kids and pets notice those details. A quiet tool setting during nap time, pet-safe lubricant where there is a choice, a gate that works again without a mess in the entryway. That is the standard here, and it is covered by the 365-Day Done Right Promise. If the repair or installation is not right, Latch & Post makes it right, no argument and no fine print.
Gate Access Control in Schertz
Gate Access Control in Schertz often comes down to undoing what a property turnover left behind. Nearly every master-planned community along the JBSA-Randolph corridor was built with automated ornamental-iron entry gates and keypads as standard features, not upgrades. When a military family PCSes out every two to three years, the gate operator, remotes, and keypad codes frequently leave with them, or get left in a state nobody can decipher. A new buyer walks into a home where the gate works, but nobody has the PIN. That is a Schertz-specific problem, and we fix it constantly.
Within Gate Access Control, the work typically involves reprogramming keypads, re-coding remotes, replacing failed control boards, and restoring operator limits so the gate opens and closes fully without binding. On a home near JBSA-Randolph, a locked keypad with an unknown PIN is often a fifteen-minute reprogram for our tech, not a replacement job. Most gate access control repairs in Schertz run $165 to $385, with the exact figure in writing before any work starts.
Keypad and Remote Reprogramming After a Home Sale
When a Schertz property changes hands, the gate access system rarely transfers cleanly. Departing owners lose remotes, forget PINs, or take the only working opener with them by accident. We re-code remotes, set fresh keypad PINs, and confirm every access point works before the new family moves in.
Control Board and Receiver Replacement
A gate that only opens from one remote, or not at all, often points to a worn receiver or a scorched control board. Schertz summer heat pushes boards past their rated limits faster than manufacturers expect. We diagnose the board itself, not just the symptom, so you are not paying for a new remote when the receiver is the problem.
Commercial Gate Operator in Schertz
Commercial Gate Operator work in Schertz is different from residential work because the gate has to keep moving. HOAs, small businesses, and multi-tenant properties along the FM 3009 and Wiederstein Road corridors rely on their gates for daily vehicle flow, and a down gate backs up traffic fast. We repair slide and swing operators on commercial gates throughout Schertz, keeping vehicle and pedestrian access working while the job is underway.
A commercial gate operator repair often involves diagnosing the motor, limit switches, safety photocells, or the control board that drives the whole system. Because Schertz’s commercial and HOA gate stock was largely installed in the same build era, we see operators from the same few brands hitting their service window at roughly the same time. When a sliding gate on a narrow shared drive drifts off its track and trips the safety photocell mid-travel, the fix is usually track realignment plus a safety sensor reposition, not a brand-new operator. Commercial operator repairs in Schertz commonly run $285 to $690, quoted in writing before work begins.
Slide Gate Track and Photocell Repair
Sliding gates on tight Schertz commercial lots take daily abuse, and when the track shifts even slightly, the gate binds and the safety sensor stops travel midway. We reset the track, re-level the operator, and confirm the photocell alignment so the gate opens and closes without false stops.
Operator Motor and Limit Switch Service
A commercial operator that runs but does not stop at the right point usually has a failed limit switch or a motor losing torque. We diagnose the exact component and replace only what failed, not the entire operator, unless the unit has reached the end of its service life and replacement is the honest call.
Trusted Brands We Service in Schertz
Our Schertz techs are factory-trained on the gate equipment families and businesses here actually own, including Viking, Ghost Controls, and DoorKing. We keep common parts for these brands on our trucks, which means less waiting on a warehouse shipment and more same-day fixes for Schertz homeowners. When a DoorKing board fails on an HOA gate off Roy Richard Drive, or a Viking swing operator on a Fairhaven shared drive gives out, we are not learning the brand on your clock. The right fix happens on the first visit, and every repair is backed by the 365-Day Done Right Promise.
Common Electric Gate Repair Problems We See in Schertz Homes
- Vertisol clay pushing hinge posts out of plumb. Schertz sits on expansive black clay that heaves and shrinks through drought-flood cycles, and when the post shifts, the gate binds and drags even though the operator still tests fine. We reset the post footing and re-level the operator, because tightening the rack alone will not hold.
- Sliding gates drifting off track on narrow shared drives. Many Schertz side yards and shared driveways are tight, and a slide gate that drifts a half-inch trips the safety photocell and stops the gate mid-travel. We realign the track and reposition safety sensors so the gate runs clean without blocking vehicle access.
- Post-PCS handoffs with unprogrammed operators and unknown PINs. When a service member PCSes out of a Schertz home near JBSA-Randolph, the gate operator is often left unprogrammed, remotes uncoded, and the keypad locked with a PIN nobody wrote down. The new buyer needs reprogramming, not replacement, and that is a routine call for us every summer.
- Summer heat cooking control boards and wiring. Schertz regularly tops 100°F in July and August, and that sustained heat degrades operator circuit boards, wiring insulation, and rubber weather seals far ahead of rated intervals. A board that fails repeatedly in summer heat is a sign the operator needs better ventilation or a board replacement, not just another reset.
Pricing for Electric Gate Repair in Schertz, TX
Most electric gate repairs in Schertz run between $185 and $540, depending on what failed. Gate access control work, like reprogramming a keypad or re-coding remotes after a home sale, typically runs $165 to $385. Commercial gate operator repairs, including track realignment and photocell service, generally land between $285 and $690. What changes the number is the part, not the drama. A failed safety sensor is cheaper than a failed operator motor. A locked keypad with an unknown PIN is cheaper than a control board replacement. You will see the exact price in writing before any work starts, every single visit. Call (626) 649-4572 for a free estimate, and the number you are quoted is the number you approve before we touch anything.
We Also Serve Cities Near Schertz
Latch & Post Gate Repair serves Schertz homeowners directly, and we also cover the surrounding communities that share the same black clay soil, tract-era gate stock, and JBSA-Randolph turnover cycle. That includes Electric Gate Repair in Schertz, Universal City, Cibolo, Converse, and New Braunfels. Scheduling is coordinated from our San Antonio office, and our crews work these cities weekly, so a Schertz gate call is never an out-of-the-way trip for us.
Serving Schertz, TX - Our Local Coverage Area
We’re based in the Schertz area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Schertz
In Schertz, a dragging gate is often the post, not the operator. The expansive black clay under this city heaves and shrinks through drought and rain cycles, shifting the hinge post out of plumb. When the post moves, the gate binds and drags even though the operator tests fine. We check the post first on every dragging-gate call here, then reset the footing and re-level the operator if needed. Call (626) 649-4572 and we will diagnose it honestly, with a written price before any work begins.
Yes, and this is one of the most common calls we get in Schertz during PCS season, May through August. When a service member departs, the gate operator is frequently left unprogrammed, remotes uncoded, and the keypad locked with a PIN nobody recorded. We can clear the old PIN, set a new one, re-code remotes, and confirm the operator limits are correct, usually in one visit. Most gate access control repairs in Schertz run $165 to $385. Call (626) 649-4572 and a live person will schedule it.
Yes. Electric gate operators in Schertz, like everywhere in Texas, must have functioning safety sensors, also called photocells, that stop and reverse the gate when something crosses its path. This matters especially on the tight shared drives and side yards common in Schertz, where a slide gate that drifts off track can trip the photocell and stop mid-travel. If your gate is stopping or reversing for no visible reason, do not disable the sensor. Have it inspected and repositioned by a trained professional instead.
Yes. On a tight shared drive in the Fairhaven community off Wiederstein Road, our tech traced a dragging swing gate to its hinge post rather than the panel. The black clay had heaved the post out of plumb, so we reset the post footing, leveled the operator, and re-ran the rack and pinion mesh. We then reprogrammed the LiftMaster keypad entry and re-coded the outgoing family’s remotes so access never lapsed during the property turnover. We stage slide-gate repairs so vehicle and pedestrian access stays open, or we schedule the work for the least disruptive window. Call (626) 649-4572 and we will work out the sequence before we start.
Unfortunately, yes. Schertz routinely exceeds 100°F in summer, and that sustained heat degrades operator circuit boards, wiring insulation, and rubber weather seals well ahead of rated service intervals. A board that fails repeatedly in July and August is often a sign of inadequate ventilation inside the operator housing, not a defective board. We diagnose the underlying heat issue and replace the board only if needed, with the written price before any work starts. Call (626) 649-4572 for an exact quote, and estimates are free.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Schertz since 2009.