Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Benbrook
Electric gate repair in Benbrook typically runs $180-$480 for most opener, motor, and sensor fixes, and we can usually have a technician at your driveway within a day of your call. We work on gates along Winscott Road, in neighborhoods near Benbrook Lake, and throughout the ranch-style subdivisions that define this part of Tarrant County. If your gate won’t open, won’t close, or has started grinding against its track, call (626) 649-4572 and a live person will answer, day or night.
What sets Benbrook apart from the rest of Fort Worth is the soil. The Tarrant County black clay under most of this city swells and contracts through every wet-dry cycle North Texas throws at it, torquing gate posts out of plumb and throwing automatic operators out of alignment in a single season. We know that because we see it weekly. A gate company that only does urban Fort Worth zip codes never learns to check the post footing first. We do.
Why Latch & Post Gate Repair Is Benbrook’s Preferred Electric Gate Repair Company
We’re part of the Cedarwell family and have been repairing gates since 2009. Our focus is narrow on purpose: gate repair, gate installation, and Electric Gate Repair. We’re not a general handyman picking up a gate job between drywall patches. Every technician who rolls up to a Benbrook home is background-checked, uniformed, and factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite.
Benbrook homeowners tell us the reason they call back is the care routine. We hand you a written price before any work begins, every visit, no exceptions. We put shoe covers on at the door and lay drop cloths down wherever we walk inside. Before we leave, you get a photo of the clean-up. It’s called the Cedarwell C.A.R.E. Promise, and it’s not an upsell. It’s how every job has gone since 2009.
Our dispatch and scheduling are coordinated from the brand’s Dallas-Fort Worth office, but the crews serving Benbrook are local to this side of the metro. They know the lake-corridor lots, the heavily treed acreage off Winscott Road, and the tight in-town driveways where you can’t park a service truck without blocking the whole family’s morning. When you call, you’re talking to a person, not a voicemail tree.
Automatic Gate Repair in Benbrook
Automatic gate repair in Benbrook is the service we most often start with a post-level check, because the black clay here rarely lets a gate go a full year without some movement at the hinge side. The typical job involves resetting the operator’s travel limits, re-aligning the rack or chain, tightening all mounting hardware, and verifying the safety sensors still talk to the control board. A standard repair call in Benbrook runs $180-$320, and you’ll see the exact number in writing before we touch a single bolt.
Homes along the western and southern edges near Benbrook Lake frequently have heavier ornamental iron driveway gates and ranch-style swing gates that were installed when the houses were built in the 1970s through 1990s. Those systems have decades of wear, and the operator is rarely the only thing failing. We look at the whole gate: post, hinges, track, operator, sensors, and remote receivers.
Post-Soil Interplay and What It Means for Your Operator
When the clay under a gate post heaves after spring rain and shrinks in August drought, the post leans. The operator keeps pushing the gate in a straight line, but the gate now travels in an arc. The motor works harder, the limit switches get confused, and the whole thing starts binding. We see this pattern constantly in Benbrook, especially on the larger lots where a heavy iron gate magnifies every degree of post lean. The fix often starts with resetting the post, not replacing the operator.
Swing Gate Bind and Track Re-Leveling
A swing gate that has dragged across the concrete for a month is usually a symptom, not the diagnosis. We re-check the hinge post, re-shim the hinges, and re-level the operator arm before we adjust the open and close force settings. This is the difference between a repair that holds and a repair that fails again in eight weeks.
Electric Gate Motor in Benbrook
An electric gate motor replacement in Benbrook runs $320-$480 on most residential swing and slide gates, including the new motor, mounting hardware, travel-limit calibration, and a final safety check of the photo eyes. We stock motors for the brands Benbrook homeowners actually have on their gates rather than ordering every unit from a distant warehouse and making you wait. If your motor buzzes but won’t move the gate, or trips the breaker every time it cycles, call (626) 649-4572 and we’ll send a tech who knows the difference between a motor problem and a post problem.
On a heavily treed acreage lot off Winscott Road near the lake, we once arrived to a 1990s LiftMaster operator on a sliding gate that had been tripping its breaker all summer. The homeowner was sure the motor was dead. Our tech found the anchor post had corroded through below grade in the wet Corps-side soil, tilting the rack and pinion until the operator was fighting the track on every cycle. We pulled and reset the post footing, re-leveled the rail, and the original LiftMaster ran clean again. No motor replacement. The right diagnosis saved that family about $400.
Control Board and Limit Switch Work
After a North Texas ice storm like the February 2021 freeze, we see control boards that won’t power on and limit switches that no longer stop the gate at the right position. These are board-level repairs, not full motor replacements, and they run $180-$260 in Benbrook. We check the whole circuit path before we quote anything, so you’re not buying a motor when you need a switch.
When a New Motor Is the Honest Answer
A motor that’s underpowered for a heavy iron gate, or one that’s been fighting a leaning post for two years, sometimes has to go. We’ll tell you straight. We’ll show you the amp draw, show you the wear on the gearbox, and give you a written price for the replacement before any work starts. If the old motor still runs, we’ll say so.
Trusted Brands We Service in Benbrook
We’re factory-trained on the gate equipment Benbrook homes were built with and the newer units homeowners have added since: FAAC, BFT, Linear, Viking, and more. For Benbrook customers, that means we keep common motors, control boards, remote receivers, and safety sensor kits readily available rather than making you wait on a two-week special order. A FAAC hydraulic operator on an iron swing gate needs different diagnostics than a BFT slide motor on an aluminum rail gate, and we can do both on the same day’s route. If you need a keypad or remote programmed to match your existing system, that’s part of the visit, not a separate trip charge.
Common Electric Gate Repair Problems We See in Benbrook Homes
- Leaning posts from black clay movement. Tarrant County’s expansive clay heaves in the rain and shrinks in the drought, and a single wet-dry season can pull a gate post visibly out of plumb. Sag correction on the panel alone won’t hold; the post footing has to be addressed first.
- Below-grade anchor post failure near the lake. On lots bordering the U.S. Army Corps of Engineers land around Benbrook Lake, soil moisture stays high and fluctuating all year. We routinely find iron posts rusted through or wood posts rotted off below grade before the gate hardware or operator ever fails, which means the anchor needs replacement before any gate adjustment will stick.
- Ice-storm damage to operator electronics. The February 2021 freeze cracked gate frames and damaged limit switches and controller circuit boards in units not rated for sustained subfreezing temperatures. We still see the fallout in systems that were patched after the storm and have never worked quite right since.
- Shared driveway gates that can’t go offline. Some Benbrook homes share a gate across a common approach, especially on the larger lots where two houses sit behind one driveway. When the gate fails, no one gets in or out. We keep the gate operational during the repair, staging the truck off the street and scheduling the work so one vehicle can always pass.
Pricing for Electric Gate Repair in Benbrook, TX
Here’s what you can expect to pay in Benbrook: standard automatic gate repair calls run $180-$320, electric gate motor replacement runs $320-$480, control board and limit switch repairs run $180-$260, and safety sensor replacement or realignment runs $120-$200. Post re-setting or footing replacement, when the clay or the lake-corridor moisture has compromised the anchor, adds $250-$500 depending on post size, depth, and whether we’re pouring a new concrete collar. Every job starts with a written price. You approve it before we start, and there’s no pressure to accept. Call (626) 649-4572 for an exact quote, free.
We Also Serve Cities Near Benbrook
Our Benbrook crews also take calls from families across the metro’s western side. We do Electric Gate Repair in Benbrook every day, but you’ll see us in Fort Worth, Dallas, San Antonio, and Houston too – each served by local Cedarwell-family technicians who follow the same C.A.R.E. Promise and 365-Day Done Right Promise.
Serving Benbrook, TX - Our Local Coverage Area
We’re based in the Benbrook area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Benbrook
Because the Tarrant County black clay under your gate posts is moving, not the gate itself. The clay expands when it rains and contracts in the dry heat, and your post leans a little more each season. A simple sag correction on the panel will not hold when the post footing is the thing shifting. We check the post first, then the hinges, and only then do we adjust the operator travel limits. If the post has moved, we’ll show you and tell you what a re-set costs before we do anything. Call (626) 649-4572 and we’ll explain it straight.
Yes. We plan every Benbrook repair around your actual daily access. On tight in-town driveways with one shared approach, we stage the truck off the street so the second vehicle can still get out mid-repair. On larger lake-corridor lots, we can work one leaf of a double swing gate at a time so one side stays passable. If the gate has to stay down overnight, we’ll tell you before we start, not after. The goal is a repair that doesn’t trap you in your own driveway. Call (626) 649-4572 to schedule around your family’s coming and going.
Sometimes, but not always. If the drag is from a failing motor or a stripped gearbox, a replacement ends it. If the drag is from a hinge post the clay has leaned out of plumb, or from an anchor post that has rotted or rusted through below grade, a new motor just burns itself out fighting the same geometry. That’s the pattern we see off Winscott Road and around the Corps-side lake lots: the post fails before the operator. We’ll test the post, the track, and the rack and pinion before we quote a motor. Call (626) 649-4572 for an honest diagnosis, free.
In Benbrook, many gates are 30 to 50 years old, installed when the lakeside neighborhoods were first built. If the operator still runs, the hinges are sound, and the posts are solid below grade, repair usually makes sense and costs far less than a full replacement. If the post footing has failed on a Corps-side lot, or the gate frame itself is cracked from ice storms, we’ll tell you straight and give you written numbers for both repair and replacement so you can decide with the facts. You approve the scope before we touch anything. Call (626) 649-4572 and we’ll walk you through it.
Yes, safety sensors are required, and yes, we check them on every visit without being asked. The photo eyes at the base of the gate and the reversing mechanism inside the operator are what keep a closing gate from hitting a kid, a pet, or a car. We test the sensors, clean the lenses, and verify the reversing force on every repair call in Benbrook. If a sensor has failed, replacement runs $120-$200 and is usually done the same visit. Call (626) 649-4572 to have yours checked.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, part of the Cedarwell family serving Benbrook since 2009.