Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Benbrook
Gate installation in Benbrook runs $2,800 to $9,500 for most residential work, with the exact figure depending on whether the job is a new fabricated steel driveway gate, a pedestrian gate off the side yard, or a full automatic operator setup. We work across Benbrook every week, from ranch-style homes along Winscott Road to acreage properties near the Lake Benbrook shoreline. Our shop coordinates dispatch from the Dallas-Fort Worth office, and crews live and work right here in Benbrook, which means a technician can usually be at your property within a day or two for a measure and a written quote. Call (626) 649-4572 any hour and a live person answers, no voicemail queue.
Why Latch & Post Gate Repair Is Benbrook’s Preferred Gate Installation Company
Benbrook homeowners call us because we understand what this specific city does to gate hardware. The Tarrant County black clay under most of Benbrook swells and contracts through the wet-dry cycle, and that movement torques posts out of plumb. A gate hung on a footing that looks fine in March can swing into the driveway by August. We account for that before we ever set a post. Every job gets a written price before work begins. Every technician arrives in uniform, background-checked, and carrying shoe covers and drop cloths. Cody Beckman runs our gate installation work, and his standard holds across every job: a cleanup photo before we leave, and a 365-Day Done Right Promise behind every installation. If it is not right, we make it right. No argument, no fine print.
You will find a real difference when you call. A live person answers 24 hours a day. You will never sit through an automated routing tree. And if your gate involves a child’s bedroom overlooking the driveway, tell us. We will schedule the noisiest cutting for a time that works around nap schedules.
Gate Fabrication in Benbrook
Gate fabrication in Benbrook often means building a steel or aluminum gate from scratch to fit an opening that a pre-made panel cannot handle. The older ranch homes here were built in the 1970s through 1990s with driveway widths and post spacing that vary by six inches or more from one house to the next. A stock gate from a big-box store rarely hangs square in those openings, and forcing it usually means a sagging panel within a year. We measure, build, and powder-coat the gate to fit the actual posts and the actual drive. A custom fabricated steel driveway gate in Benbrook runs $2,800 to $6,500 for a single swing panel, with double gates starting around $4,200.
Custom Fabrication for Benbrook Driveways
When we build a gate for a Benbrook driveway, we start with the post condition before we weld a single joint. That sounds obvious, but it is where most installations fail here. A fabricated gate is only as solid as its anchor. On acreage lots off Old Granbury Road and along the south side of the city, we often replace or re-pour post footings before hanging anything new.
Pedestrian and Side-Yard Gates
A pedestrian gate off the side yard or a back gate leading toward the Corps of Engineers trail network has different needs than a driveway gate. These gates get the same fabrication care, but we pay extra attention to latch alignment and self-closing hinges. Benbrook families with dogs tell us a gate that fails to latch all the way matters just as much as a driveway gate that will not open. A fabricated pedestrian gate in Benbrook typically runs $900 to $2,200 installed.
Automatic Gate Installation in Benbrook
Automatic gate installation in Benbrook means pairing a gate with an operator and safety system that can handle what the clay soil and the weather throw at it. The February 2021 ice storm put a lot of older operators out of commission, and many of those units were never upgraded. If you have a swinging driveway gate that you would like to operate from a keypad or a phone app, the installed cost for the operator package, safety photocells, and wiring lands between $2,100 and $4,800 depending on whether the gate is single or double, swing or slide. We install and program DoorKing, LiftMaster, and Viking operators, all factory-trained.
Swing Gate Operators on Black Clay
Benbrook’s expansive clay is the reason we insist on proper post footings before an operator goes on. The movement is not subtle. Posts can lean noticeably within a single wet winter, and once they do, the operator arm binds and the limit switch loses its position. We set posts below the active clay zone, then mount the operator on a reinforced plate. That is the difference between a gate that stays in cycle and one that needs a service call twice a year.
Slide Gates for Tight Benbrook Driveways
Several Benbrook neighborhoods were platted with shared driveways and restricted side yards where a swing panel cannot physically open without hitting a fence or the neighbor’s car. In those cases, a slide gate is the right answer. A rack-and-pinion slide operator handles the movement, and the panel travels along the driveway line instead of arcing into it. Installed slide gate systems in Benbrook run $3,800 to $9,500 depending on gate length and operator choice.
Trusted Brands We Service in Benbrook
We are factory-trained on the brands Benbrook families actually own, and we keep the most common parts stocked locally. That includes DoorKing, Viking, Ghost Controls, and Elite operators, plus LiftMaster and the full range of accessories that pair with them. When a Benbrook customer calls on a Tuesday about a keypad that quit reading, we do not want them waiting on a ground shipment from a distributor. The right fix usually leaves our van on the first visit, not the second.
Common Gate Installation Problems We See in Benbrook Homes
- Posts heaving out of plumb. The black gumbo clay under much of Benbrook expands after rain and contracts in drought, and a post set too shallow will visibly lean inside a year. We see this most on the west side, where newer construction sits on clay that was heavily worked before the slab went down.
- Hinge failure on 30- to 50-year-old iron gates. Many Benbrook homes were fenced and gated in the 1980s, and those barrel hinges have been carrying a 300-pound panel for four decades. We routinely replace hinge assemblies and re-align panels before the gate drags or snaps the top hinge.
- Shared driveways with no swing clearance. Properties east of Highway 377 and inside the old Benbrook town site often share narrow drives or sit close to the property line. A swing panel simply will not work, so we convert to a slide gate and a rack-and-pinion operator.
- Corps land moisture at the Lake Benbrook corridor. Along the shoreline, soil moisture stays elevated year-round, and below-grade post sections rot or rust through faster than the hardware above them. We routinely find the anchor post itself has failed, and footing replacement becomes step one before any new gate can be installed.
On a heavily treed acreage lot off Winscott Road near the Lake Benbrook shoreline, we replaced a failed iron hinge post on a 16-foot ornamental swing gate and re-poured the post footing, then re-aligned the LiftMaster gate operator the clay movement had knocked out of cycle. The old post had corroded through at grade. The gate panel was fine, but nothing we adjusted would have stayed plumb on that footing. We also set new safety photocells so the swing gate’s entrapment protection would pass UL 325.
Pricing for Gate Installation in Benbrook, TX
Here is an honest breakdown of what Benbrook homeowners can expect to pay. A custom fabricated single swing gate runs $2,800 to $6,500. A double driveway gate starts around $4,200 and can reach $7,800 with ornamentation. A pedestrian gate runs $900 to $2,200. Automatic operator packages land between $2,100 and $4,800, and a full slide gate system with operator runs $3,800 to $9,500. The number moves based on gate width, steel weight, operator choice, and whether the existing posts need to be replaced. You will see the exact figure in writing before we order a single part, and that price is locked before any work starts. Call (626) 649-4572 for a free site measure and written estimate.
We Also Serve Cities Near Benbrook
While this page is focused on Gate Installation in Benbrook, our crews regularly work in nearby Fort Worth and Dallas, and we coordinate larger fabrication jobs in Houston and San Antonio. If you are on the edge of town or have a property that straddles the county line, call us and we will sort out scheduling. Our Gate Installation team handles the whole DFW metro.
Serving Benbrook, TX - Our Local Coverage Area
We’re based in the Benbrook area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Benbrook
Yes, but the posts almost always have to come out first. In Benbrook, leaning posts are usually the result of black clay movement pushing the footing out of plumb, and hanging a new swing gate on that footing simply moves the problem onto the new hardware. We remove the old posts, pour new footings deep enough to get below the active clay zone, and then hang the gate. Expect footing replacement to add $600 to $1,200 per post to the project. Call (626) 649-4572 for a site measure and a written number.
Usually not, and that is common in Benbrook, especially in the older platted sections east of Highway 377 and around the town site. A swing panel needs clearance equal to its own length, and many shared drives only have room for a car. In those cases, we install a slide gate with a rack-and-pinion operator so the panel travels along the fence line instead of arcing into the drive. We will tell you straight which option fits before you spend a dollar.
Yes. Every automatic gate operator installed in Benbrook must have entrapment protection, which means photo-eye sensors across the gate path and, on swing gates, a secondary edge sensor or contact edge. This is a UL 325 requirement, not an upsell, and we will not energize an operator without it. If you have kids or dogs who use the driveway, this is the part of the install you will be glad you paid for.
The soil near the lake holds moisture year-round, and that constant damp accelerates rust at the base of iron gate posts and rot in wood posts, which shifts the gate and binds the operator. The operator itself is usually fine. The post it is mounted to is what failed. That is why installations along the Lake Benbrook shoreline and near Corps of Engineers land often include post replacement before any new operator goes on. It is the most common correction we make on that side of Benbrook.
We install and program DoorKing, Viking, Ghost Controls, Elite, and LiftMaster operators, and we carry OEM parts for each. If you have an existing operator from one of those brands and want to keep the remote controls you already have, we can usually match the new install to your current system. Call (626) 649-4572 and ask for an operator compatibility check before you replace anything.
Ready for a straight answer on a new gate in Benbrook? Call (626) 649-4572 today. We will schedule a free measure, walk you through what makes sense for your driveway, and hand you a written price before any work starts. Shoe covers on, drop cloths down, cleanup photo before we leave. That is the standard.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Benbrook since 2009.