Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Paterson, NJ
Latch & Post Gate Repair is a Paterson gate company focused on one trade: the latch that holds your gate and the post that carries it. Most Paterson homes were built between 1890 and 1930, meaning gate posts sit in aged brick and lime mortar, not modern concrete footings. That changes how a gate fails here, and it changes how a repair should be quoted. If you need a gate looked at, call (626) 649-4572 and you’ll get a live person, day or night.
Why Paterson Homes Are Different
Paterson’s housing stock is a mix of two- and three-family brick rowhouses and semi-attached worker housing, much of it built between 1890 and 1930. Gate posts here are often set directly into old brick pillars or brownstone columns with degraded lime mortar. Water works into the joints, freezes through Paterson winters, and heaves the pillar out of plumb. The frame twists, the latch no longer meets the catch, and hinges shear. A technician who only knows suburban wood-post gates will misread the whole job.
Low-lying streets near the Passaic River add another layer. Flooding during Hurricane Ida in 2021 left standing water around gate bases, ground hinges, and electric operators in neighborhoods along the floodplain. That submersion accelerates rust and shorts control boards on a cycle most towns never see. We work on these gates with the freeze-thaw and water exposure in mind from the first measurement, not as an afterthought. The fix that holds in Totowa or Haledon may not hold in the 4th Ward or around Eastside Park, and we quote accordingly.
Our Main Paterson Services
Most calls we take in Paterson come down to two situations: a sagging gate that won’t latch, or a gate that needs a fresh start with new posts and hardware. Here is what each involves locally.
Gate Repair in Paterson
A leaning post, a latch that misses the strike, a hinge pulling out of old brick: these are the common Paterson failures. We reset or reinforce the post, replace the latch and hinges, and realign the gate so it swings without dragging. Because many posts sit in lime mortar that crumbles under load, we often use a masonry anchor or secondary bracket instead of relying on the original material. You’ll see the written price before any work starts. Gate Repair in Paterson has the full breakdown.

Gate Installation in Paterson
A new gate in Paterson usually means a new post system, not just a new panel. If the old post is brick with degraded mortar, we set a steel post in a proper concrete footing and face it to match where needed. We measure the opening, account for the alley or driveway slope, and quote the full job including hardware and cleanup. Every installation includes drop cloths where we walk and a photo of the cleanup before we leave. Gate Installation in Paterson covers the process step by step.

Electric Gate Repair in Paterson
Electric gates in Paterson face two local enemies: moisture from Passaic River flooding and freeze-thaw movement in the posts. When an opener stops mid-travel, the cause is often a soaked control board, a rusted ground hinge, or a post that’s shifted enough to bind the arm. We service FAAC, BFT, Linear, and Viking openers, and we test the full travel before we call the job done. Electric Gate Repair in Paterson explains what we check.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Paterson
We’re factory-trained on the equipment Paterson homeowners and shop owners actually run: FAAC, BFT, Linear, and Viking, among others. Common boards and safety-edge parts for these brands are stocked for quick local calls. That means less waiting on a shipped part and a better chance of same-visit repair. See our brands for the full list.
Pricing for Gate Company in Paterson, NJ
| Service | Typical range in Paterson |
|---|---|
| Gate latch replacement | $120 - $220 |
| Hinge replacement (pair) | $140 - $280 |
| Gate alignment and re-set | $160 - $320 |
| Post reinforcement or reset | $250 - $500 |
| Full gate repair (labor-heavy) | $300 - $700 |
| New standard gate installation | $800 - $2,200 |
| Custom gate installation | $2,000 - $5,500 |
| Electric opener replacement | $500 - $1,500 |
| Control board replacement | $180 - $450 |
| Safety sensor or edge repair | $150 - $350 |
What pushes a Paterson price toward the upper end is usually the post. Rotted brick and crumbled mortar mean a simple hinge swap sometimes becomes a post reset. The written price we hand you before any work starts already accounts for what we can see, and we tell you if a hidden condition changes the scope before we touch anything.
Neighborhoods We Serve in Paterson
We cover the full Paterson area, from the brick rowhouse blocks near downtown to the river-adjacent streets that saw Ida flooding. Most calls get a same-day or next-day visit.
- Eastside Park
- South Paterson
- Hillcrest
- Riverside
- Lakeview
Service Area – Cities Near Paterson
We also serve nearby communities including North Bergen, NJ, Jersey City, NJ, Newark, TX, and Union City, CA. Scheduling for these locations is coordinated from the brand’s New York City office, with local crews dispatched to Paterson and surrounding areas.
Serving Paterson, NJ - Our Local Coverage Area
We’re based in the Paterson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Paterson
Most Paterson calls get a same-day or next-day visit, and when a gate won’t close at all we treat it as urgent. A broken gate that leaves a yard open or a shop locked out overnight gets prioritized. Call (626) 649-4572 and a live person will give you a real arrival window, not a recorded message.
For most residential gate repairs and direct replacements, no permit is needed. If the work involves a new footing or a substantial post excavation, the city may require a simple permit. We’ll tell you during the estimate whether your job falls into that category so there are no surprises with the building office.
Yes. We schedule around quiet hours when that matters, use pet-safe lubricants where there’s a choice, and our technicians wear shoe covers and lay drop cloths inside the home. Every visit ends with a cleanup photo before the technician leaves, and the price is in writing before the first tool comes out. Call (626) 649-4572 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Paterson Customers Say
"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs





Before
After
Before
After
Before
After