Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Yonkers, NY
Latch & Post Gate Repair handles gate repair, gate installation, and electric gate repair across Yonkers, NY. What makes Yonkers work different is the housing itself: pre-WWII attached and semi-attached homes with original wrought-iron gates hung on brick or bluestone pillars that are now 80 to 100 years old. Add steep hills, heavy winter road salt, and Hudson River moisture, and you get a city where gate problems almost always start with the post, not the hardware. Call Gate Repair in Yonkers at (626) 649-4572 and a live person answers, day or night.
Why Yonkers Homes Are Different
Yonkers’s older grid neighborhoods are packed with early-1900s through 1930s row houses and semi-detached multi-family buildings. Many still have their original cast- or wrought-iron gates set into period brick or cut-stone pillars that have never been replaced. Those pillar foundations have shifted over decades of freeze-thaw cycles, so a gate that suddenly drags the ground or won’t latch is often a post that has racked out of plumb, not a broken hinge.
The terrain makes it worse. Yonkers sits on steep, hilly topography, and city crews apply heavy road salt throughout winter. Brine runoff accelerates corrosion on exposed iron gates far faster than in flat suburban towns to the north. Meanwhile, the western waterfront neighborhoods along the tidal Hudson River estuary carry elevated ambient moisture, so metal components rust through noticeably faster than on inland blocks. On the steep streets of Park Hill and the older southwest riverfront blocks, frost heave can shift aging masonry gate pillars several inches in a single winter. The most common spring call we get is a heavy iron gate that won’t latch because the ground thawed and moved the post.
Yonkers also operates under its own municipal building codes through the Yonkers Building Department, not NYC. Structural pillar work or gate replacement that touches those old brick footings typically requires local permits. Contractors coming up from the Bronx or over from Westchester suburbs are often unfamiliar with Yonkers’s specific requirements, which is one reason locally familiar crews have an edge on the permitting side.
Our Main Yonkers Services
Most Yonkers homeowners call us for one of three things: a gate that no longer closes right, a gate that needs full replacement, or an electric opener that has stopped responding. Each service has its own dedicated Yonkers page below.
Gate Repair in Yonkers
Most repair calls in Yonkers start with a post that has shifted. We reset or shim the pillar before touching any hardware, because installing a new latch on a leaning post just means the gate will sag again in a few months. From there we address the hinge, latch, or frame. On older ornamental iron, we also check for rust-through at the hinge weld points, which Hudson River moisture accelerates. See the full breakdown at Gate Repair in Yonkers.
Gate Installation in Yonkers
Installing a gate on a Yonkers attached home often means working with an existing brick or bluestone pillar that predates WWII. We assess whether the pillar can carry a new gate before recommending a mount, and we handle the Yonkers Building Department permit side when the work requires it. We can match ornamental iron styles common to the city’s older row-house neighborhoods. Details on the process are at Gate Installation in Yonkers.
Electric Gate Repair in Yonkers
Electric gate openers in Yonkers face the same salt and moisture issues as everything else on the property. Circuit boards corrode, sensors get caked with brine residue, and swing arms strain when frost heave shifts the gate’s geometry. We diagnose the opener itself before assuming the gate or post is fine, because in this city the two are usually connected. Read more at Electric Gate Repair in Yonkers.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Yonkers
Our technicians are factory-trained on Viking, Ghost Controls, DoorKing, and Elite equipment, among others. We keep common boards, remotes, and sensor components stocked for faster turnaround on Yonkers calls, and we can source less common parts without holding up the job longer than necessary. Every repair is backed by the 365-Day Done Right Promise. See the full list at our brands.
Pricing for Gate Company in Yonkers, NY
| Service | Typical range in Yonkers |
|---|---|
| Gate latch replacement | $95-$250 |
| Gate hinge replacement (pair) | $120-$300 |
| Wrought-iron gate pull or handle | $60-$180 |
| Gate post reset or shimming | $180-$450 |
| Driveway gate wheel and track repair | $140-$350 |
| Electric gate circuit board replacement | $220-$600 |
| Gate opener limit switch adjustment | $100-$250 |
| Safety sensor replacement or realignment | $90-$220 |
| Manual gate to electric conversion | $450-$1,100 |
| Full single swing gate replacement | $600-$1,800 |
Prices in Yonkers push upward when a post has to be excavated and reset in stone or brickwork rather than simply shimmed, and when salt corrosion has spread to the point where multiple hinge points need replacing at once. Whatever the job, you receive a written price before any work begins, and that number does not change unless you approve a change in scope.
Neighborhoods We Serve in Yonkers
We work throughout Yonkers, including the hillier blocks where post shift is a recurring spring problem and the riverfront stretches where salt air and brine runoff take a faster toll on iron. Our crews are based nearby and can typically reach most Yonkers addresses within a single business day.
- Park Hill
- Getty Square
- Southwest Yonkers riverfront
- Lincoln Park
- Dunwoodie
Service Area – Cities Near Yonkers
Latch & Post Gate Repair serves Yonkers and the surrounding metro area. We also cover Mount Vernon, NY, New Rochelle, NY, White Plains, NY, and Bronx, NY. Scheduling is coordinated from the brand’s New York City office, with crews serving Yonkers locally.
Serving Yonkers, NY - Our Local Coverage Area
We’re based in the Yonkers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Yonkers
We can often reach Yonkers addresses the same day for urgent repairs, and a live person answers every call 24/7 to schedule you. For non-urgent work like installation or a full replacement, we schedule the next available window and give you a written price before anything starts. Call (626) 649-4572 and we’ll tell you exactly when we can be there.
Structural work that touches pillars, footings, or post foundations in Yonkers typically requires a permit through the Yonkers Building Department, which operates separately from NYC. Simple hardware repairs like a latch or hinge usually do not. We can tell you which category your job falls into and handle the permit process when needed.
Yes, and those are some of the most common jobs we see. The original wrought-iron gates on Yonkers’s pre-WWII row houses and two-family homes are often still serviceable, but their posts need resetting and the iron needs corrosion treatment. We assess the post before the hardware, because that is the order the problem actually occurs. Estimates are free.
For a straight answer on price and a written quote before any work starts, call Latch & Post Gate Repair at (626) 649-4572. A live person answers anytime, and our technicians arrive with shoe covers, drop cloths, and a cleanup photo before they leave – your floors stay clean, your family stays safe, and the gate works like it should.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Yonkers Customers Say
"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick