Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Fircrest, WA
Gate work in Fircrest looks different than it does in most Pierce County neighborhoods, because the homes here sit under a dense canopy of Douglas firs and western red cedars that hold moisture against fence lines nearly all year. That shaded, damp microclimate is why wooden gate posts in Fircrest tend to rot from the ground line up, and why iron hardware oxidizes faster than it does on the open lots just a few blocks into Tacoma. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we focus on one thing: gates that stay square, latch cleanly, and open smoothly. If your gate is leaning, dragging, or sealing poorly, call (626) 649-4572 and a live person will answer.
Why Fircrest Homes Are Different
Most of Fircrest’s homes were built between the 1940s and 1970s as a planned residential community, and a lot of those properties still have their original-era fence posts and gates. The lots are generous, the landscaping is mature, and the trees are enormous. That combination creates a specific set of problems. Root systems from those old firs and cedars heave concrete footings over time, sometimes lifting a post 1 to 2 inches out of plumb. A gate that looks like it needs a simple hinge adjustment often turns out to need a full post reset because the footing underneath has moved. And the canopy overhead means the soil stays damp even in summer, so a post that looks solid at eye level can be soft and punky right at the ground line.
There’s also a visible standard here. Fircrest homeowners tend to want restoration or ornamental replacement rather than a quick patch, because the neighborhood’s appearance matters. A sagging gate or a post wrapped in a repair plate stands out on these streets. The right fix usually means addressing the footing, the post, and the hardware together so the gate looks right and stays right.
Our Main Fircrest Services
The two calls we get most often from Fircrest homeowners are gates that won’t latch or swing cleanly, and electric openers that have stopped responding. Each service has its own Fircrest page with full details, pricing, and what to expect.
Gate Repair in Fircrest
Wood gates in Fircrest fail most often at the post and the hardware, because the shaded, damp soil keeps working on both. We reset posts that have shifted, replace rotted sections at the ground line, and rebuild latch and hinge points so the gate swings and closes the way it should. On ornamental iron gates, the usual culprit is oxidation around the hinges and latch, which we service in place whenever possible. Before we touch anything, you’ll have a written price. Learn what’s covered on our Gate Repair in Fircrest page.
Gate Installation in Fircrest
New gates in Fircrest need posts set to account for the root systems that run under these older lots. We dig to the right depth, use proper drainage at the footing, and set posts so they stay plumb as the ground around them shifts. Whether you’re replacing a deteriorated wooden gate with ornamental iron or adding a new driveway gate, we’ll give you a written price and a clear scope before the work starts. See the full breakdown on our Gate Installation in Fircrest page.
Electric Gate Repair in Fircrest
Electric gate systems in Fircrest deal with the same moisture and debris that attack the gates themselves. Rain soaked soil, fallen needles, and constant dampness work on control boards, wiring runs, and ground loops. We diagnose openers, safety sensors, keypads, and remote receivers, and we’re factory trained on the brands most common on these properties. You’ll know the diagnosis and the price before any part is ordered. Details are on our Electric Gate Repair in Fircrest page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fircrest
We’re factory trained on the equipment Fircrest homeowners actually have installed: FAAC, BFT, Linear, and Viking, among others. Having the right parts on the truck and the right training for the board or motor in front of us is what makes the difference between a one visit fix and a return trip. You can see the full list on our our brands page.
Pricing for Gate Company in Fircrest, WA
| Service | Typical range in Fircrest |
|---|---|
| Gate latch replacement | $225 - $450 |
| Hinge repair or replacement (set) | $150 - $350 |
| Wood gate post reset (single post) | $400 - $800 |
| Post replacement with new footing | $600 - $1,200 |
| Gate adjustment and realignment | $190 - $380 |
| Full wood gate replacement (standard walk gate) | $900 - $2,200 |
| Ornamental iron gate install (standard walk gate) | $1,500 - $3,500 |
| Electric opener diagnostic service call | $150 - $250 |
| Control board replacement | $450 - $950 |
| Safety sensor replacement (set) | $250 - $450 |
| Keypad or remote receiver install | $250 - $500 |
| Full electric gate opener system (installed) | $2,800 - $6,500 |
What pushes a price toward the higher end in Fircrest is usually a footing that’s been heaved by roots or a post that’s rotted several inches below grade, which means more digging and a larger footing pour. No matter what the job needs, you’ll see the exact number in writing before we start, and that number is what you’ll pay.
Neighborhoods We Serve in Fircrest
We work throughout Fircrest, from the tree lined streets near the center of town out to the larger lots along the edges. The neighborhoods below are a sample, not the full map, if you’re in Fircrest, you’re in our service area. Most repair calls in Fircrest can be scheduled within a day or two, and emergency gate failures are handled around the clock.
- The center of town near City Hall and the park
- The streets around Fircrest Golf Club
- The residential blocks along Alameda Avenue
- The neighborhoods bordering Tacoma on the north and east edges
- The larger lots near Regents Boulevard and the south side
Service Area – Cities Near Fircrest
Fircrest is our focus, but we also take calls from surrounding Pierce County and the broader region. If you’re in Tacoma, WA just across the city line, or further out in Seattle, WA, Spokane, WA, or Vancouver, WA, our scheduling team can route the right technician to you. Dispatch and scheduling are coordinated from the Cedarwell Seattle office, and crews serve Fircrest locally.
Serving Fircrest, WA - Our Local Coverage Area
We’re based in the Fircrest area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fircrest
Most non emergency repairs in Fircrest can be scheduled within one to two days. If a gate is stuck open, won’t close, or has come off its hinges, call (626) 649-4572 and we’ll treat it as a priority. A live person answers the phone 24 hours a day, 7 days a week.
Most standard gate repairs and direct replacements don’t require a permit, but Fircrest does have community appearance standards, and some HOAs want to review new gate designs before installation. We can tell you what to check for your specific street and talk through your HOA’s guidelines before you commit to anything.
Yes, every visit includes a written price before any work begins. That’s not an estimate that drifts, it’s the number you approve. If you decide not to go ahead, you owe nothing. Call (626) 649-4572 for your free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fircrest Customers Say
"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide