Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Fircrest
A new driveway gate in Fircrest typically runs $1,800 to $6,500 for fabrication and installation, with automatic openers adding $1,200 to $3,800 depending on the motor and control package. That’s the real range we quote here, and you’ll see the exact number in writing before anything gets touched. We serve the whole city, from Electron Way down to the neighborhoods around Fircrest Park, and we plan every job around the tree roots, tight lots, and shared rights of way that define this town. If you need a gate that actually fits your site and keeps working through the wet season, call us at (626) 649-4572 for a free measure and written estimate.
Why Latch & Post Gate Repair Is Fircrest’s Preferred Gate Installation Company
Cody Beckman leads our team, and he’s built our reputation in Fircrest on one simple habit: we treat the job the way a careful neighbor would. That means we lay drop cloths on the floor and put on shoe covers before we step inside your home, we ask before we move anything in the yard, and we leave a photo of the clean-up before we drive away. Our Gate Installation team works under the Cedarwell Care Promise, which is not an upsell. It’s the baseline: written price, covered floors, clean exit. Homeowners in Fircrest who call us once tend to call us for every gate they ever own.
We’re known around Fircrest for the 365-Day Done Right Promise. If the installation isn’t right, we make it right. No argument, no fine print, no time wasted. A live person answers our phone 24 hours a day, seven days a week, including holidays. That matters when you’re trying to schedule around school pickup or a sleeping baby. And because we’re factory-trained on the brands Fircrest homeowners actually own – Viking, Linear, Ghost Controls, DoorKing, LiftMaster – the right parts and the right fix usually happen on the first visit.
Fircrest is its own place, and we treat it that way. The tree canopy here is not a trim detail; it’s the defining condition of gate work in this city. We know what the Douglas fir roots do to footings on the streets off Regents Boulevard and how the saturated soil near the south end of Electron Way behaves in February. That local knowledge is the difference between a gate that sags again next winter and one that stays square for years.
Gate Fabrication in Fircrest
Gate fabrication in Fircrest is usually custom work, because most homes here predate modern gate sizing and the original openings follow no standard. A lot of the properties off Electron Way and Regents Boulevard were built to accommodate a single car, so a modern two-car gate often will not fit the existing piers without a fabricated frame matched to the site. We build driveway gates, pedestrian gates, and double gates to the exact width, swing, and weight your property demands, with steel frames and whatever infill you choose. A fabricated steel pedestrian gate for a Fircrest side yard runs $900 to $2,200 installed. A custom fabricated double driveway gate, including posts and hardware, typically lands between $3,200 and $7,500 depending on size and automation.
Custom Slide Gates for Tight Right of Way
When a swing gate has no room to open on a narrow shared driveway, a slide gate is the sensible fix. We fabricate slide gates to track along the lot line or follow a concrete curb, and we weld the rack to match the exact post spacing of your site. This keeps the gate moving cleanly even when a root has shifted one post a quarter inch out of true.
Ornamental and Match-the-House Fabrication
Fircrest homeowners tend to want a gate that looks like it belongs with the rest of the property. We match picket spacing, top rail profiles, and finish tone to existing iron or fencing. The point is not just a working gate; it’s a gate that fits the street the way the rest of your home does.
Automatic Gate Installation in Fircrest
Automatic gate installation in Fircrest pairs a fabricated gate with an operator sized to the leaf weight and the way the gate is used, and that second part is where most cheap installs fail. A gate that cycles thirty times a day for a shared driveway needs a heavier operator and better limit switch placement than a gate that opens twice a week. We install swing and slide operators, along with the safety hardware that code requires, and we tune the force settings and the closing speed on site. A complete automatic swing gate install in Fircrest starts around $2,900 and moves up to $6,800 for a substantial double gate with an intercom or keypad. Automatic slide systems run $3,500 to $8,200 when the rack, chain, and operator are all built to the site.
LiftMaster and Viking Operator Setup
We fit the opener to the gate, not the other way around. A LiftMaster residential swing operator is a good match for many Fircrest driveways, but a heavy custom steel gate often needs a Viking or BFT ram operating a solid steel bracket. We watch the current draw during the first cycles and adjust the travel so the motor is not fighting the wet-season swell in the post.
Keypads, Intercoms, and Safety Edges
Any automatic gate in Fircrest needs proper entrapment protection. We mount photo eyes at the correct heights, install contact safety edges on closing edges, and program the close-force reversal so it triggers reliably. For gated properties with a tenant suite or a shared right of way, we add a keypad or intercom so every household gets access without a garage remote floating around.
Trusted Brands We Service in Fircrest
We’re factory-trained on Viking, Linear, Ghost Controls, and DoorKing, and we keep common control boards, limit switches, and safety eyes on our trucks so Fircrest customers are not waiting on a shipped part for a week. That matters here because the saturated soil and constant moisture are hard on equipment housings. A transformer that would last fifteen years in a dry climate often corrodes in eight around a Fircrest tree line. When we install or repair, we use the brand your gate was built for rather than forcing in a universal part, so the motor calibration, travel limits, and safety logic all stay matched. Our techs can service equipment from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we’ll tell you if an older opener is worth rebuilding or is better replaced.
Common Gate Installation Problems We See in Fircrest Homes
- Root-heaved footings. A mature Douglas fir or western red cedar will lift a concrete post footing one to two inches over the course of decades. The gate sags, the latch stops lining up, and the hinges look like the culprit – but the real fix is resetting the post and footing, not cranking the hinge.
- Ground-line rot on wooden posts. Fircrest’s conifer canopy keeps the soil perpetually damp and blocks summer drying, so a wooden post set in concrete wicks moisture at the base and rots off at ground level. It looks fine from five feet away until the gate starts dragging.
- Slide gate binding in narrow shared driveways. When the rack and pinion alignment shifts because a post settles unevenly in saturated soil, the chain jerks and the motor strains. Tight rights of way off Electron Way are especially prone, because there’s no room to compensate for a moving post.
- Original-era hardware failures. Most Fircrest homes were built between the 1940s and 1970s, and a good share still carry their original hinges, latches, and post straps. The iron has oxidized for decades in damp shade, and the hardware finally lets go, often at the hinge barrel, which drops the leaf onto the driveway.
Pricing for Gate Installation in Fircrest, WA
Pedestrian gate installation in Fircrest runs $900 to $2,200 for a fabricated steel or welded aluminum gate, set on properly reset posts. A single swing driveway gate falls between $2,200 and $4,800 including the posts, hinges, latch, and a serviceable finish. A double driveway gate is $3,600 to $8,000 depending on width, infill, and whether you’re replacing or keeping existing posts. Automatic operators add $1,200 to $3,800 per leaf. Every quote is committed to writing before we start, and the price we write is the price you pay. If the site conditions change mid-job, we stop and show you the new number before spending a dollar. Call (626) 649-4572 for a free estimate and a real number, not a range with an asterisk.
Our dispatch and scheduling is coordinated from the Seattle office, and our crews serve Fircrest direct. You get a live person on the phone any hour, and a local technician who knows the streets and the tree trouble on them.
We Also Serve Cities Near Fircrest
While this page is built specifically for Gate Installation in Fircrest, our crews also work in the surrounding communities. We cover Seattle, Spokane, Tacoma, and Vancouver with the same Cedarwell Care Promise, written pricing, and 365-Day Done Right guarantee. If you have a property in one of those cities, you’ll get the same careful service, just a little farther from the tree canopy that defines Fircrest proper.
Serving Fircrest, WA - Our Local Coverage Area
We’re based in the Fircrest area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Fircrest
The usual culprit in Fircrest is not the hinge at all – it’s a post that has been lifted out of plumb by a Douglas fir or cedar root. The tree heaves the concrete footing one to two inches, the post tilts, and the gate leaf follows it down. Tightening the hinge just bends the strap. The only real fix is to reset the post and footing, often with a deeper pour that sits below the main root zone, and then rehang the gate. Call (626) 649-4572 and we’ll measure the plumb before we touch a single bolt.
Yes, and this is one of the most common installs we do around Electron Way and the older streets north of Fircrest Park. A slide gate runs parallel to the fence line, so it needs almost no swing clearance, and the gate can cantilever to avoid a ground track that fills with fir needles. We fabricate the leaf to the exact right-of-way width, reset any post the track anchors to, and mount the operator with photo eyes and a contact edge so both households pass safely.
Every automatic gate we install in Fircrest gets photo eyes, a contact safety edge, and a close-force reversal test, and we tune all three on site. For shared driveways we add a keypad or intercom so each household has its own entry, because a gate that swings open for every car is a gate that eventually clips a child on a bike. These are code requirements, not extras, and they’re included in our written price.
Fircrest’s firs and cedars keep the ground shaded and damp for most of the year, which means wooden posts rot faster and concrete footings move more than they do on open suburban lots nearby. We plan for that: deeper post bases, steel-reinforced footings, and hardware with wet-climate coatings. When we install a gate in Fircrest, we’re building for the microclimate first.
We do, and they’re a practical choice for Fircrest because the canopy means reduced sun exposure, so the panel sizing and battery reserve have to be matched to the actual shade profile of your lot. We mount the solar panel on a detachable post above the shade line where possible, and we size the battery for the winter gray stretch. Written quote comes before any work, and the 365-Day Done Right Promise covers the whole install.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Fircrest and the surrounding communities with the Cedarwell family since 2009.