Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Newport Beach, CA
Latch & Post Gate Repair is a Cedarwell-family gate specialist serving Newport Beach, CA. Homes here run from 1940s beach cottages on Balboa Island to 1990s custom estates in Newport Coast, and nearly every job involves salt air working against iron, aluminum, and control boards. We focus on one trade: the latch that holds the gate and the post that carries it. If you need a gate looked at, call (626) 649-4572 and a live person answers, day or night.
Why Newport Beach Homes Are Different
Newport Beach sits directly on the Pacific, and the marine layer does more than cool the evenings. Salt-laden air settles on hinges, weld joints, wiring terminals, and control boards year-round. On Balboa Island and Lido Isle, gates are effectively surrounded by Newport Harbor, which means salt exposure comes from multiple directions and shortens the life of untreated iron parts dramatically. We see control boards corroded at the terminal strips and hinge posts rusting at the base within a few seasons if the wrong hardware was used originally.
The housing stock adds another layer. Tight lots on the Balboa Peninsula often mean vehicle and pedestrian gates swing over brick-paver alleys with inches of clearance, and the ground-level salt moisture from the harbor causes hinge posts to heave and corrode simultaneously. In Newport Coast, Harbor Ridge, and Big Canyon, most gates are ornamental iron or aluminum automatics that must comply with HOA access-control standards. That means coordinating with property managers and using equipment the community has already approved. The right hardware selection here is not an upsell. It is the difference between a gate that lasts three seasons and one that lasts fifteen.
Our Main Newport Beach Services
The two calls we get most from Newport Beach homeowners are for gates that have stopped swinging true and operators that have stopped responding to the remote. Each service has its own Newport Beach page with full pricing and details.
Gate Repair in Newport Beach
A sagging gate on Balboa Island is rarely just a hinge problem. The post has often shifted in salt-softened soil while the gate’s own weight has pulled the frame out of square. We realign, replace corroded hardware, and set the gate so it swings cleanly over the pavers again. The full breakdown of what a Gate Repair in Newport Beach visit involves, including pricing, is on its own page.
Gate Installation in Newport Beach
New installation in Newport Beach usually means working around an HOA specification, a sloping driveway, or a tight side yard where every inch of swing matters. We measure, quote a written price that includes the post setting, gate fabrication, hardware, and cleanup, then install to the community’s approved spec. Details and full Gate Installation in Newport Beach pricing are on the service page.
Electric Gate Repair in Newport Beach
Salt air is hardest on electric gate components. We open the control box and typically find corroded terminals, a failed capacitor, or a circuit board that has been breathing harbor air for a decade. We test the operator, the safety edges, and the remote receivers, then replace only what has actually failed. The full Electric Gate Repair in Newport Beach scope, including brands and repair costs, is covered on its page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Newport Beach
Our technicians are factory-trained on the operators Newport Beach homeowners actually have: FAAC, BFT, Linear, and Viking among them. We stock common replacement boards and remotes for these brands locally, which shortens turnaround on most electric gate repairs. For the full list of equipment we work on, see our brands.
Pricing for Gate Company in Newport Beach, CA
| Service | Typical range in Newport Beach |
|---|---|
| Gate latch replacement | $95-$180 |
| Hinge replacement (per hinge) | $60-$130 |
| Gate frame realignment | $150-$300 |
| Post reset in concrete | $250-$500 |
| Gate hardware upgrade (latch + hinges) | $180-$400 |
| Surface-mounted gate closer | $180-$350 |
| Operator control board replacement | $250-$600 |
| Remote programming | $45-$90 |
| Safety sensor replacement | $120-$250 |
| Electric gate diagnostic call | $95 flat, waived with repair |
Prices in Newport Beach trend toward the upper end of those ranges when salt corrosion has spread beyond the obvious part, which is common on bayside lots. Every quote is written and agreed before any work begins, so the number you approve is the number you pay.
Neighborhoods We Serve in Newport Beach
We run calls across Newport Beach six days a week, from Balboa Island and the Peninsula to Newport Coast, Harbor Ridge, and Big Canyon. Most non-emergency visits in Newport Beach can be scheduled within a few days, and emergency calls are handled through our 24/7 phone line.
- Balboa Island
- Balboa Peninsula
- Lido Isle
- Newport Coast
- Harbor Ridge
- Big Canyon
Service Area – Cities Near Newport Beach
We serve Newport Beach and the surrounding coastal and central Orange County communities. That includes Costa Mesa, CA, Fountain Valley, CA, Tustin, CA, and Santa Ana, CA. Wait, Costa Mesa, Fountain Valley, Tustin, Santa Ana are in inland OC, not coastal. But they’re all within 15-20 minutes of Newport Beach. Inland gates have different failure patterns – less salt, more heat and dust – but the same Latch & Post standards apply.
Serving Newport Beach, CA - Our Local Coverage Area
We’re based in the Newport Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Newport Beach
Yes. Many Newport Beach communities, including gated enclaves in Newport Coast and Big Canyon, have approved equipment lists and finish requirements. We coordinate with property managers and work within those specs. If your HOA requires a specific operator brand or iron finish, we quote around it from the start.
Most non-emergency visits are scheduled within a few days. If a gate is stuck open or a vehicle is blocked, call (626) 649-4572 and a live person answers 24/7. We dispatch to Newport Beach as quickly as the schedule allows, including evenings and weekends.
It can, if the repair reuses untreated hardware. That is why we recommend corrosion-resistant hinges, stainless or zinc-plated fasteners, and weatherproofed control boards on any gate within a few blocks of the water. We will explain what we are installing and why, before the work begins.
Contact Latch & Post Gate Repair
If your gate is sagging, stuck, or no longer responding to its remote, call us at (626) 649-4572. You will get a live person, a straight answer, and a written price before any work begins. We serve all of Newport Beach with the Cedarwell Care Promise: shoe covers and drop cloths inside your home, a cleanup photo before we leave, and the 365-Day Done Right Promise on every job.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Newport Beach Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco