Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Costa Mesa, CA
We’re Latch & Post Gate Repair, a gate company serving Costa Mesa, CA. Most of the gate work here traces back to two things: salt air from the marine layer and iron hardware installed in 1960s and 1970s tract homes that was never coated against corrosion. We work on ornamental driveway gates, pedestrian gates, and automated systems in Mesa Verde, the Eastside, and the flatlands near the OC Fairgrounds. Call (626) 649-4572 for a written price before any work starts.
Why Costa Mesa Homes Are Different
Gates in Costa Mesa don’t age the way gates in Santa Ana or Anaheim do. The city sits three to four miles from the Pacific, so most mornings bring fog that deposits salt moisture onto exposed steel and wrought iron. That moisture sits on hinges, bottom rails, and welds all day, and over decades it works itself inside the metal. A gate in Mesa Verde that looks passable from the street often has hinge pins corroded to the point of seizure underneath.
The housing stock makes it more visible. Many of the ranch-style tract homes in Mesa Verde still carry their original decorative wrought iron driveway gates. Those gates were installed bare, without powder coating, and the hinges were never replaced. Fifty-plus years of marine moisture has wicked through the hinge barrels. The same conditions affect automated gates in the many HOA-governed townhome communities across the city, where slide operators and swing-arm motors see shortened lifespans from moisture intrusion into control boards. Costa Mesa gate work is rust work, more than anything else.
Our Main Costa Mesa Services
Costa Mesa homeowners call us most often for the same two starting points: a gate that won’t move the way it should, or an electric system that stopped responding. Each service has its own Costa Mesa page here.
Gate Repair in Costa Mesa
Most repair calls in Costa Mesa are hinge failures, not damaged panels or broken posts. The original bare-steel hinges on Mesa Verde gates wick salt moisture from the inside, and one day the gate simply stops swinging. We replace seized hinges with new hardware that resists the marine layer, re-align the gate, and touch up the surrounding metal so the repair doesn’t stand out. We also handle sagging gates, broken latches, weld failures, and weld repairs on ornamental iron. Pricing is written and agreed before we begin. Details on Gate Repair in Costa Mesa.
Gate Installation in Costa Mesa
New gate work in Costa Mesa usually means choosing a material that can stand up to constant salt exposure. We guide homeowners toward powder-coated steel or aluminum where the marine layer is worst, and we measure, order, and install with the Cedarwell C.A.R.E. routine: shoe covers inside, drop cloths on the floors, a clean-up photo before we leave. We install driveway gates, pedestrian gates, and side-yard gates. Every project starts with a written quote. Details on Gate Installation in Costa Mesa.
Electric Gate Repair in Costa Mesa
Coastal humidity works on gate operators the same way it works on hinges. Moisture creeps into control boards, motor housings, and wiring connections, and the system stops responding or trips intermittently. We troubleshoot FAAC, BFT, Linear, and Viking operators, plus photo eyes, keypads, and safety loops. The goal on the first visit is a correct diagnosis and a written price for the fix, not a guess. Same-day response is available for emergency calls. Details on Electric Gate Repair in Costa Mesa.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Costa Mesa
Our technicians service FAAC, BFT, Linear, and Viking operators, and we keep common Costa Mesa parts in our local stock, such as hinge kits, latch assemblies, and control boards. Check our brands for the full list of what we service.
Pricing for Gate Company in Costa Mesa, CA
| Service | Typical range in Costa Mesa |
|---|---|
| Site visit & diagnosis | $59-$129, credited toward repair |
| Standard gate-latch replacement | $120-$280 |
| Hinge replacement (standard pair) | $140-$350 |
| Weld repair, ornamental iron (per location) | $95-$250 |
| Gate realignment & adjustment | $110-$260 |
| Post stabilization (single post) | $180-$420 |
| Driveway gate install (single swing, standard) | $1,800-$5,200 |
| Pedestrian gate install | $600-$1,800 |
| Electric operator replacement (residential swing) | $1,400-$3,800 |
| Control board replacement | $350-$850 |
| Safety sensor / photo eye replacement | $140-$320 |
| Gate opener repair (labor only) | $120-$300 |
Salt-corrosion repairs in Costa Mesa can run higher than inland jobs because the damaged metal often needs more prep work before welding or painting. You’ll see the exact number in writing before we start, and no work begins until you approve it.
Neighborhoods We Serve in Costa Mesa
We cover all of Costa Mesa, including the neighborhoods where corrosion and original ironwork are most common. Our typical response for repair calls across the city is same-day or next-day.
- Mesa Verde
- Eastside Costa Mesa
- Westside Costa Mesa
- College Park
- Halecrest / Hall of Fame
Service Area – Cities Near Costa Mesa
Latch & Post Gate Repair serves Costa Mesa and the surrounding Orange County communities, with dispatch coordinated from our Los Angeles office and crews serving Costa Mesa locally. In addition to Costa Mesa, we serve Fountain Valley, CA, Newport Beach, CA, Santa Ana, CA, and Huntington Beach, CA.
Serving Costa Mesa, CA - Our Local Coverage Area
We’re based in the Costa Mesa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Costa Mesa
For repair calls in Costa Mesa, our typical response is same-day or next-day. We answer every call with a live person at (626) 649-4572, so you’ll talk to a real person immediately, not a voicemail queue.
New gate installations in Costa Mesa may need a permit depending on the location and style, particularly in HOA-governed communities where architectural review also applies. We don’t handle permits directly, but we can tell you what to expect after we see your property. Call us for details.
Yes, we work with Costa Mesa HOAs and townhome communities on slide and swing gate repair, operator replacement, and safety-sensor work for shared entrances. We understand the scheduling realities of shared gates and can quote with HOA approval in mind.
If your gate in Costa Mesa is sticking, sagging, or not opening at all, call (626) 649-4572. We’ll give you a written price before any work starts, and the 365-Day Done Right Promise covers every repair and installation.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Costa Mesa Customers Say
"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs