Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Gig Harbor, WA
When a gate fails in Gig Harbor, it’s rarely a simple hinge adjustment. The harbor’s salt air, 55 inches of yearly rain, and sloped driveway terrain combine to corrode hardware, warp wooden panels, and shift posts in ways technicians from flatter, drier cities rarely encounter. Latch & Post Gate Repair works exclusively on gates across the Gig Harbor peninsula, from hillside estate lots to old waterfront properties near the harbor. If your gate is sagging, stuck, or refusing to open, call us at (626) 649-4572 and a live person answers.
Why Gig Harbor Homes Are Different
Gig Harbor’s residential boom after the second Tacoma Narrows Bridge opened in 2007 filled the peninsula with master-planned communities where ornamental iron and cedar-board automated gates are standard. These gates sit on steep grades, often installed on driveways that climb 15 to 20 degrees or more. Uphill posts settle into the clay-heavy soil, the gate leans, and the operator arm binds mid-swing. That failure mode is routine here. Across the Narrows in Federal Way or Lakewood, it is uncommon.
The marine climate adds a second layer. Salt-laden air off Puget Sound and the harbor keeps metal hardware damp even on dry days. Circuit boards inside gate operators corrode, exposed wiring connections fail, and cedar gates swell every October through February until latches bind. A standard repair here accounts for terrain and moisture together. Older properties close to the historic harbor have custom wrought-iron gates built before modern standardized mounting, which means parts often need to be matched, not just swapped.
Our Main Gig Harbor Services
Most Gig Harbor homeowners reach out to us for one of three reasons: a gate that won’t latch, a new gate for a steep driveway, or an electric operator that’s stopped responding. Each service has its own detailed Gig Harbor page.
Gate Repair in Gig Harbor
Gig Harbor gate repair hinges on diagnosing why the gate is binding. On hillside lots, the post is usually the culprit. On waterfront properties, corroded hinges and rusted latch hardware dominate. We lay drop cloths and put on shoe covers before stepping inside, and the written price comes before any work starts. Learn more on our Gate Repair in Gig Harbor page.
Gate Installation in Gig Harbor
New gates in Gig Harbor must be planned around the grade. A properly installed post on a steep driveway needs deeper footings than a flat lot, and the hinge placement changes to account for the slope. Every installation includes a written price, no surprises afterward. We walk through material choices with you, from cedar to iron. Details on our Gate Installation in Gig Harbor page.
Electric Gate Repair in Gig Harbor
Electric gate operators here run into two specific problems: circuit board corrosion from persistent fog and salt air, and motor burnout from trying to move a gate whose posts have shifted. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. Full breakdown of our approach on the Electric Gate Repair in Gig Harbor page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Gig Harbor
We’re factory-trained on the systems Gig Harbor families actually have: LiftMaster, DoorKing, Viking, FAAC, and Ghost Controls among them. Our technicians arrive with common boards, arms, and safety parts on the truck for those brands, which means most Gig Harbor electric gate repairs are completed the same visit. See the full list on our brands page.
Pricing for Gate Company in Gig Harbor, WA
| Service | Typical range in Gig Harbor |
|---|---|
| Gate latch replacement | $160 - $240 |
| Hinge replacement (pair) | $200 - $320 |
| Gate post reset (minor lean) | $350 - $550 |
| Gate post reset (major, hillside) | $600 - $1,100 |
| Electric gate circuit board replacement | $280 - $460 |
| Operator arm replacement | $320 - $580 |
| Full electric operator replacement | $850 - $1,600 |
| Wood gate panel replacement | $400 - $750 |
| Cedar gate seasonal adjustment | $120 - $190 |
| Safety sensor repair (photo eyes) | $150 - $260 |
Gig Harbor’s hillside terrain can push a post reset toward the higher end of the range when the footing needs to be extended into undisturbed soil. Salt corrosion on older wrought-iron hardware can add time, too. Whatever the job, you receive a written price before any work begins, and that number doesn’t change unless you approve a change first.
Neighborhoods We Serve in Gig Harbor
We respond to gate problems throughout Gig Harbor, from the harbor-front homes in the historic center to the hillside subdivisions that climb the peninsula’s slopes.
- Canterwood
- North Creek
- Harbor Hill
- Point Fosdick
- Maplewood
Most Gig Harbor gate repairs are reached within 60 to 90 minutes, depending on where the call originates. We quote an arrival window over the phone when you call.
Service Area – Cities Near Gig Harbor
Beyond Gig Harbor, our crews cover nearby communities across the Narrows and the peninsula. We serve Wauna, WA, Vashon, WA, Port Orchard, WA, and University Place, WA. Dispatch and scheduling are coordinated from the brand’s Seattle office; crews live and work locally in the Gig Harbor service area.
Serving Gig Harbor, WA - Our Local Coverage Area
We’re based in the Gig Harbor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Gig Harbor
Most Gig Harbor calls are answered by a technician within 60 to 90 minutes. A live person answers the phone 24 hours a day, so you’ll get an arrival window on the first call, not a voicemail.
Many Gig Harbor subdivisions with gated entrances or uniform fencing have architectural review requirements. A repair that matches the existing look typically doesn’t trigger review, but a full gate replacement in a master-planned community often does. We’ve worked with dozens of local HOAs and can help you understand what your board will need to see.
We service the entire peninsula, including older waterfront properties with custom wrought-iron and wood gates. Those jobs often take more time for parts matching. You’ll know the full price before we start, either way.
If your gate is sagging, sticking, or dead, call (626) 649-4572 for a free estimate. A live person answers around the clock. We’ll name a price before touching anything, and if it’s not right, the 365-Day Done Right Promise makes it right. No argument, no fine print.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Gig Harbor Customers Say
"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon