Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Neptune Beach
Gate repair in Neptune Beach costs roughly $140 to $380 for most latch, hinge, and sag fixes, while a full operator replacement on an electric driveway gate typically runs $850 to $2,400 depending on the motor and control board. That’s the honest range we quote before any work begins, in writing, so you know exactly what you’re paying. We know Neptune Beach homes, we know the salt air a block off First Street, and we answer the phone around the clock at (626) 649-4572.
We’re Gate Repair specialists, not general handymen. We work on the gate itself: the hinge, the post, the latch, the operator, the control board. When a gate drags across the sand on a cottage near the ocean or an automated driveway gate refuses to open after a king tide, we’re the crew that fixes it and leaves your yard cleaner than we found it.
Why Latch & Post Gate Repair Is Neptune Beach’s Preferred Gate Repair Company
Neptune Beach homeowners call us because we treat their gate like it’s attached to our own house. The Neptune Beach properties we service range from 1950s beach cottages off Atlantic Boulevard to newer builds with ornamental aluminum driveway gates, and we’ve seen how differently each one fails. A post set in wet sand behaves nothing like one poured into inland clay, and we plan for that.
Every visit includes a written price before we touch a single bolt, shoe covers and drop cloths if we step inside, and a photo of the cleanup before we leave. That’s the Cedarwell Care Promise, and it’s not an upsell; it’s how we’ve worked since 2009. Our technicians are background-checked, uniformed, and factory-trained on Viking, Ghost Controls, DoorKing, Elite, and the other brands families in this area actually own.
We also schedule around what matters in your house. If your kids are napping, we use quiet tools or come back at a better time. If your dog uses the side gate, we’ll tell you before we take it down. Small things, but they’re why people in Neptune Beach keep our number.
Wrought Iron Gate Repair in Neptune Beach
Wrought iron gate repair in Neptune Beach is almost always a corrosion story, not a strength story. The iron itself usually holds up; the problem is the hinge pins, latch hardware, and the bottom rails that sit in the salt-laden breeze off the Atlantic. We see pitted steel, frozen hinges, and latch boxes rusted shut within a few seasons of exposure.
A typical wrought iron hinge and latch repair in Neptune Beach runs $160 to $320. If the bottom rail has rusted through or the gate has dropped enough to tear the hinge, you’re looking at welding and re-hanging, which lands closer to $280 to $480. We’ll show you the number in writing before any work starts and explain whether the panel is worth repairing or replacement is the cheaper answer.
Rusted Latch and Hinge Replacement
Salt air eats the moving parts first. We remove the frozen hardware, treat the surrounding iron where we can, and replace latches and hinges with marine-grade aluminum or stainless hardware that holds up far better here. If the gate still hangs square after the swap, the repair is done and done right.
Welding and Structural Rust Repair
When a bottom rail or picket has rusted through, we weld in new material and match the finish as closely as possible. Some panels have rusted beyond a solid weld point, and in those cases we’ll be honest: a new aluminum panel near the ocean will outlast the old iron and cost less over five years.
Metal Gate Repair in Neptune Beach
Metal gate repair in Neptune Beach covers aluminum, steel, and ornamental panels that have shifted, sagged, or seized. The two-front failure here is common: the post loses purchase in the wet sandy soil below while the hardware corrodes above ground. One side of the gate drops, the latch stops lining up, and the whole panel grinds against the driveway.
Realigning a metal gate that’s sagging from a worn hinge or loose post costs about $140 to $260 in Neptune Beach. If the post itself has heaved or rotted below grade, we’re digging it out, re-setting it in marine-rated concrete, and re-hanging the panel; that runs $300 to $550. We’ll give you the exact figure in writing before we dig anything.
Post Re-Setting in Wet Sand
The water table in Neptune Beach often sits 18 to 36 inches below grade. That’s shallow enough that a poorly set post can wobble loose within a season or two. We dig below the water table, pour a marine-rated concrete footing, and set the post so it stays square for years, not months.
Sagging and Gate Realignment
A gate that drags is usually a hinge problem, not a panel problem. We check the post, the hinge, the latch, and the ground clearance before we change anything. Often the fix is a hinge swap and a re-hang; sometimes the post has moved and needs more work. Either way, you’ll know the cost first.
Trusted Brands We Service in Neptune Beach
We service the equipment Neptune Beach homeowners actually have, including Viking, Ghost Controls, and DoorKing operators. We’re factory-trained on those control boards and motors, and we keep common parts in our local service van so a board swap or a limit switch repair doesn’t turn into a two-week wait. If you’ve got an older LiftMaster or a Mighty Mule on a wooden swing gate, we handle those too. We’ll tell you when a board can be repaired and when a sealed, marine-rated replacement is the smarter choice this close to the ocean.
Common Gate Repair Problems We See in Neptune Beach Homes
- Corroded hinges and latches. Direct salt spray from the Atlantic works through steel hardware within months. We replace it with aluminum or stainless hardware sized to the existing gate and post.
- Leaning or heaving posts. The sandy saturated soil just above the water table lets posts move below grade. The gate looks like it’s sagging, but the post is the problem, and we re-set it properly.
- Flooded operator boxes. During king tides and tropical systems, low streets near the beach flood fast, and ground-mounted control boxes take on water. We mount sealed, marine-rated housings and recommend elevated boards as standard practice.
- Obsolete control boards on legacy operators. Many Neptune Beach homes still run operators from before modern safety standards existed. We can retrofit some; on others, replacement is the cheaper and safer answer.
Pricing for Gate Repair in Neptune Beach, FL
Standard latch and hinge repairs on wooden and chain-link gates in Neptune Beach run $140 to $260. Metal gate realignment, post re-setting, and weld repair fall between $280 and $550 depending on how far the post has moved and whether we’re working in wet sand. Electric gate operator replacement starts around $850 for a basic repair and goes up to $2,400 for a full sealed, marine-rated motor and control board swap. Every quote is written and agreed before we start, and the 365-Day Done Right Promise covers all of it. Call (626) 649-4572 for your free estimate.
We Also Serve Cities Near Neptune Beach
Our Neptune Beach crew also works in Jacksonville Beach, Atlantic Beach, Jacksonville, and Yulee. If your gate sits a few blocks into a neighboring city, the same technicians, the same written pricing, and the same cleanup routine apply. For Gate Repair in Neptune Beach or anywhere nearby, one call gets you on the schedule.
Serving Neptune Beach, FL - Our Local Coverage Area
We’re based in the Neptune Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Neptune Beach
It depends on the control board and whether it has been soaked by flood water. A dry, corroded board can sometimes be repaired or swapped; a board that’s taken on salt water during a king tide usually needs replacement. On a mid-century cottage near Atlantic Boulevard, we found an older LiftMaster unit with a corroded control board and no working safety photocell. We replaced it outright with a sealed, marine-rated operator on an elevated housing. Call (626) 649-4572 and we’ll tell you honestly whether your unit is worth saving.
The post is moving below grade. In Neptune Beach, the water table sits 18 to 36 inches down, and posts set in that wet sand lose purchase slowly. The panel isn’t bent; the hinge post is leaning, and the gate swings low on the latch side. We re-set the post in marine-rated concrete and re-hang the panel so it clears the ground again.
Because the town sits directly on the Atlantic, and most homes are within two to four blocks of open salt spray. Marine air eats ferrous hardware on a timescale of months, not years. That’s why we recommend aluminum or stainless hinges and latches here, and why routine gate maintenance is a near-annual task for most Neptune Beach homeowners.
UL 325 safety requirements apply to automated gate operators, including the photocell sensors and entrapment protections. Permit requirements vary by site. We handle the equipment side to current safety standards and can tell you what your specific install needs before we quote anything.
Yes. Ground-mounted control boxes short out when low-lying Neptune Beach streets flood, even if the motor itself survives. Mounting the board in an elevated, sealed housing keeps it out of standing water during king tides and tropical systems. We recommend it as standard practice here, not an upgrade.
If your gate is dragging, leaning, or refusing to open, call (626) 649-4572 for a free estimate. We’ll give you a written price before any work starts, and we’ll leave your yard and floors clean when we’re done.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Neptune Beach since 2009.