Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Neptune Beach
Electric gate repair in Neptune Beach, FL usually runs $180-$480 for common fixes like hinge replacement, control board swaps, and sensor realignment, while full motor replacements land between $650 and $1,400 depending on the operator brand and swing versus slide configuration. Most repairs are done in a single visit, and we carry the parts that Neptune Beach gates actually need, from FAAC boards to Linear arms. If your gate won’t open, drags on the ground, or trips its safety photocell every cycle, call (626) 649-4572 and a live person answers, day or night.
We know Neptune Beach not as a dot on a map but as a place where Atlantic salt spray hits every hinge, latch, and operator housing within three blocks of the shoreline. That’s why our Electric Gate Repair team treats this town’s gate problems differently than we would a few miles inland. The water table here sits 18 to 36 inches below grade, so posts heave in the saturated sand while the ocean air eats the metal above. Fixing one without checking the other means another call in six months.
Why Latch & Post Gate Repair Is Neptune Beach’s Preferred Electric Gate Repair Company
Since 2009, we’ve worked as part of the Cedarwell family of independently owned and operated gate specialists, and our focus is narrow on purpose: gate repair, gate installation, and electric gate repair. We’re not a handyman service that also hangs gates. We’re the crew that knows a corroded Viking hinge from a misaligned BFT limit switch, and we can tell you which one your gate has before we’ve finished crossing the lawn. Dispatch and scheduling are coordinated from our Miami (South FL) office, and crews serve Neptune Beach locally with parts stocked for the exact failure pattern this coastline produces.
Homeowners around Neptune Beach call us because the write-up is as clean as the repair. Every visit starts with a written price before any work begins, and that number doesn’t change unless you ask us to do something extra, which you’ll also see in writing first. Technicians arrive background-checked and uniformed, and they follow the Cedarwell C.A.R.E. values: Clean up like it is our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, Explain the price before the work. Shoe covers go on at the door, drop cloths go down on the floor, and you get a photo of the clean-up before we leave. Kids asleep down the hall? We use quiet tools and can schedule around nap time.
Every repair and installation carries the 365-Day Done Right Promise. If it isn’t right, Latch & Post makes it right. No argument, no fine print. That’s the whole promise, and it applies to every gate we touch in Neptune Beach.
Automatic Gate Repair in Neptune Beach
Automatic Gate Repair in Neptune Beach often means rescuing a legacy operator that’s been fighting the salt air for a decade or more. The typical job involves a swing arm or slide motor that’s running but not closing, a keypad that stopped accepting codes, a remote that pairs and quits, or a safety sensor that trips the gate back open every cycle. Most of these repairs run $180-$480 in Neptune Beach, and the exact number is always in writing before we start.
Legacy operators and retrofit calls
Many homes around Neptune Beach still run operators installed in the 1990s or early 2000s: an old FAAC swing arm, a first-generation LiftMaster slide drive, a BFT board in a rust-pitted housing. When the board fries and no compatible replacement exists, the honest conversation is retrofit versus replace. We’ll lay out both numbers, explain what safety code compliance means for each path, and let you decide with the prices in front of you.
Sensor and loop realignment
On blocks near the beach, photo-eye alignment drifts constantly. Posts heave slightly in the wet sand, the gate sags half an inch, and the safety sensor no longer sees across the opening. We re-foot posts and re-align optics so the entrapment protection tests reliably, then we show you the test result before we pack up.
Electric Gate Motor in Neptune Beach
Electric Gate Motor work in Neptune Beach is rarely just a motor. Because the ocean air corrodes housings and the shallow water table shifts the post, we inspect the full system: operator arm or rack, control board, hinges, loops, and safety edges. A straight motor replacement in Neptune Beach runs $650-$1,400 on average, but if the board is also fried or the post has heaved, catching it now costs far less than a second visit next spring.
Marine-rated motors and elevated housings
For properties within a few blocks of the Atlantic, we recommend marine-rated motors and elevated control-board housings rather than treating them as a luxury upgrade. King tides and tropical systems flood low-lying Neptune Beach streets quickly, and ground-mounted operator boxes on recently rebuilt properties get inundated. A box mounted 18 inches higher and a motor sealed against salt ingress is the difference between a gate that runs for a decade and one that fails every other storm season. The cost is modest: an elevated marine-rated setup adds $200-$400 to a motor replacement here, and it’s a discussion we’ll have with you straight, not as a surprise line item.
When to replace instead of retrofit
If your motor is 15 years old, the board is obsolete, and the arm has been swaying for two summers, replacement is usually the cheaper answer. We’ll tell you that plainly. A new unit with modern UL 325 entrapment protection, a sealed housing, and a warranty beats paying $400 now to nurse a rusted housing through another salt season.
Trusted Brands We Service in Neptune Beach
We’re factory-trained on the brands Neptune Beach families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For this coastline specifically, we see a lot of FAAC arms on older euro-style gates, Linear slide drives on post-2000 teardown builds, BFT boards in mid-century driveway conversions, and Viking hardware on ornamental aluminum. We keep replacement boards, arms, hinges, and sensor parts for these brands in local stock, which means faster turnaround than ordering from a distributor when your gate quits on a Tuesday. The right fix happens on the first visit, not the third.
Common Electric Gate Repair Problems We See in Neptune Beach Homes
- Corroded hinges, latches, and rack hardware. Direct Atlantic salt spray within three blocks of the shore eats ferrous metal in months, not years. Gates bind, sag, and misalign long before the panel itself fails, which is why aluminum and vinyl have become the practical default for new installs here.
- Gate posts heaving in the shallow water table. With saturated sand just 18 to 36 inches below grade, posts lose purchase and lean, dragging panels and drifting photo-eye alignment even on newer automated gates. Re-footing a post is often the fix the gate actually needs, not a new motor.
- Obsolete control boards on legacy operators. Old LiftMaster, FAAC, and BFT units reach a point where no compatible board exists. At that stage, retrofitting means jerry-rigging an old motor to a mismatched board, and honest math usually favors a marine-rated replacement installed once.
- Flooded operator boxes after king tides. Low-lying streets in Neptune Beach flood fast, and ground-mounted operator boxes on post-2000 builds get inundated. Sealed enclosures and elevated housings are becoming standard practice here rather than an upgrade, especially for homes east of 3rd Street.
Pricing for Electric Gate Repair in Neptune Beach, FL
In Neptune Beach, common electric gate repairs run $180-$480. That covers hinge and latch replacement, sensor realignment, keypad and remote reprogramming, limit switch adjustments, and control board replacement on current-generation units. Motor replacement runs $650-$1,400, depending on brand and whether it’s a swing arm or a slide drive. Elevated marine-rated housings add $200-$400 for homes in the flood-prone blocks near the shore. Post re-footing and sag correction on a standard driveway gate runs $300-$700, depending on depth and soil conditions. Every quote is written and agreed before any work starts, so the number you approve is the number you pay. Call (626) 649-4572 for a free estimate, and a live person picks up.
We Also Serve Cities Near Neptune Beach
If you’re down the road in Jacksonville Beach or Atlantic Beach, or a few minutes inland in Jacksonville or Yulee, we cover those communities too. For more about our full coverage and services, see Electric Gate Repair in Neptune Beach and the surrounding First Coast area.
Serving Neptune Beach, FL - Our Local Coverage Area
We’re based in the Neptune Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Neptune Beach
Your operator is almost certainly failing from a combination of salt-spray corrosion above grade and post movement below it, which is the specific dual failure pattern we see in Neptune Beach. Marine air corrodes the board and housing contacts while the shallow water table shifts the post, and that combo kills a five-year-old unit faster than a twenty-year-old one inland would die. The fix is usually a marine-rated motor in an elevated housing plus a post re-foot. Call (626) 649-4572 and we’ll diagnose which half of the problem you actually have.
Sometimes, and we’ll tell you straight when it makes sense. If the motor and arm are still solid and only the control board or safety sensor is outdated, we can often retrofit current UL 325 compliant protection for $250-$500. If the operator is at end of life, you’ll get both numbers, retrofit and replacement, and the decision stays yours.
In Neptune Beach, it’s usually the post. Our sandy, saturated soil lets posts heave and lose purchase, which is why the panel leans and drags even when the gate itself is fine. We’ll check the post footing, correct it if needed, and repair the hinge wear at the same time, with a written price before we start. Estimates are free.
Yes, and the reason is the salt: direct Atlantic spray within a few blocks of the shore corrodes ferrous metal fast, which is why aluminum and vinyl have become the default for Neptune Beach gates. They don’t rust, they don’t need repainting every two years, and they hold alignment far longer in the wet, sandy soil. Call (626) 649-4572 for exact material pricing for your lot.
Raise the control-board housing at least 18 inches above ground level and install a sealed, marine-rated motor, which we recommend as standard practice for flood-prone Neptune Beach blocks rather than a special upgrade. On recently rebuilt properties along streets like 2nd and 3rd, this single modification prevents most saltwater electronics failures. We can quote the elevation work and the operator upgrade together in one written price.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Neptune Beach since 2009.