Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
How Much Does Gate Repair Cost in Fresno?
Most gate repairs in Fresno run between $145 and $650, with the average homeowner paying around $310 for a single-visit fix on a driveway or pedestrian gate. Simple jobs like a latch adjustment or hinge replacement usually land at the low end, while electric gate repairs that involve control boards, motors, or operator arms push toward $500 and up. You’ll see the exact number in writing before we touch anything, and the estimate is free.
Latch & Post Gate Repair has worked on Fresno gates since 2009 as part of the Cedarwell family of independently owned and operated gate specialists. We stick to three things: Gate Repair services, gate installation, and electric gate repair. Nothing else. That focus is why we can usually tell you the price on the first call.
Gate Repair Cost Breakdown (2026)
Here’s what Fresno homeowners are actually paying this year. These are typical ranges for residential work, not a menu. Every gate is different, so your written price may fall outside these numbers if your gate has unusual hardware or storm damage.
| Repair Type | Typical Fresno Cost |
|---|---|
| Latch replacement or adjustment | $145 - $260 |
| Hinge repair or replacement | $175 - $320 |
| Gate sag realignment | $220 - $420 |
| Post repair or reset (wood or steel) | $280 - $600 |
| Wheel and track repair (sliding gates) | $195 - $380 |
| Electric gate motor or operator repair | $340 - $750 |
| Control board or receiver replacement | $280 - $560 |
| Photo-eye or safety sensor replacement | $180 - $340 |
| Keypad or remote programming | $95 - $180 |
What pushes a bill up? Rust. Fresno gets hot, dry summers and cool, damp winters, and that swing is hard on steel gates and the posts that carry them. We see more seized hinges and cracked concrete footings here than in coastal markets like Jacksonville, FL. What keeps a bill down? Catching a loose hinge before it shears. A $175 hinge repair today saves you a $580 post reset six months later.
If your gate is wood, the valley’s low humidity means boards shrink in summer and swell slightly after winter rain. That movement loosens hardware. Small tightenings are cheap. Waiting until a gate drags on the ground is not.
What Affects Gate Repair Pricing in Fresno
- Manual vs. electric. A manual swing gate is simple hardware. Add a LiftMaster or FAAC operator and you’ve added a control board, a motor, sensors, and battery backup. Electric gate repair almost always costs more because there’s simply more that can fail.
- Gate material. Vinyl and aluminum hold up well and rarely need welding. Steel needs corrosion work. Wood needs hardware moved when boards shift. The material dictates the labor.
- Post condition. The post carries the whole gate. If the footing has cracked, we’re not just fixing a hinge, we’re resetting a post. That’s the single biggest swing in price on this page.
- Parts availability. We’re factory-trained on the brands Fresno families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you have one of those, we likely have the part on the truck.
- Access and gate size. A wide driveway gate in the Fig Garden area takes longer to support and align than a narrow side-yard gate. Double gates take longer than single.
- Age of the gate. Hardware nearing the end of its life may need more than one fix in a visit. We tell you honestly when a repair is the right call and when it isn’t.
How to Save on Gate Repair
The cheapest gate repair is the one you don’t need. A few habits keep Fresno gates working longer:
- Clear the track and footing. Valley dust, leaves, and grit build up on sliding gate tracks. A quick sweep every few months prevents the wheel wear that leads to a $380 repair.
- Get a written price before work starts. Every single visit, we hand you a written price before anything is touched. No pressure to accept. That protects you from surprise add-ons.
- Fix the small thing first. A loose hinge is a $175 fix. A failed post is a $600 one. The difference is timing, not luck.
- Ask about a service visit before your gate gets loud. Squealing, dragging, or a remote that works only up close are early warnings. Addressing them early keeps the cost low.
- Request the free estimate. Call (626) 649-4572 and we’ll give you a real range on the phone, then confirm it in writing on-site.
One more thing worth knowing: we lay drop cloths on the floor and put on shoe covers before we step inside, and we take a photo of the clean-up before we leave. If your kids are napping, we use quiet tools. That’s part of the Cedarwell C.A.R.E. values, and it comes at no extra charge.
FAQs - Gate Repair Cost
How much does a gate repair cost in Fresno?
A typical gate repair in Fresno costs $145 to $650 in 2026, with most homeowners spending around $310. Simple latch and hinge fixes sit at the low end; electric gate motor and control board work sits at the high end. Call (626) 649-4572 for an exact quote, free of charge.
Is it cheaper to repair or replace a gate?
Repair is usually cheaper if the gate frame and posts are still sound, typically $145 to $420 versus $900 and up for full replacement. Once the post footing is compromised or rust has eaten through the frame, replacement tends to be the better long-term number. We’ll tell you which one your gate actually needs, without pushing either way.
How much does electric gate repair cost in Fresno?
Electric gate repair in Fresno runs $280 to $750, depending on whether the issue is a sensor, a receiver, a control board, or the operator motor itself. We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we diagnose and fix on the first visit where possible - check our Las Vegas, NV price guide for another desert market. Call (626) 649-4572 for a free estimate.
Can you come today if my gate won’t close?
In most cases, yes. A gate that won’t close is a same-day priority for us, and a live person answers the phone 24 hours a day, 7 days a week, including nights and holidays. There’s no voicemail and no callback queue. Call (626) 649-4572 and we’ll get you a written price before we start.
Do you charge extra for the cleanup or shoe covers?
No. Shoe covers, drop cloths, and a photo of the clean-up before we leave are included on every visit at no extra cost, along with a written price before work begins. Those are part of how we work, not add-ons. Every job is also covered by the 365-Day Done Right Promise: if the repair isn’t right, we make it right. Call (626) 649-4572 to schedule your free estimate.
Why Fresno Homeowners Call Latch & Post
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on, and it’s why we’re not a general handyman or a big-box service center. We’re a Cedarwell-family gate specialist, independently owned and operated since 2009, and we answer every call with a real person, around the clock. Background-checked, uniformed technicians. Upfront pricing, always in writing. A guarantee that actually covers the work.
For a free estimate on your Fresno gate, call (626) 649-4572. We’ll give you a real number, put it in writing, and leave your floors exactly the way we found them.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Fresno since 2009.
Pricing reflects the Fresno market as of 2026. Latch & Post Gate Repair offers free estimates - call (626) 649-4572.
What Our Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco





Before
After
Before
After
Before
After