Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Westchester
Gate installation in Westchester means working with older homes, older gates, and a climate that punishes metal and electronics harder than almost anywhere in Florida. A new driveway or pedestrian gate installed properly on a Westchester property runs between $1,800 and $6,500 depending on material, automation, and whether the existing columns can be saved. Most jobs take one full day once materials are on site, and we quote every Westchester installation in writing before any work begins. Call (626) 649-4572 when you want a straight answer instead of a wild guess. Our Gate Installation crew works from a South Florida office in Miami and serves Westchester locally, so scheduling is measured by how close we are, not how far a dispatcher has to send someone.
Every gate comes down to two things: the latch that holds it and the post that carries it. That is the job we focus on, and it is why we understand what your block actually needs better than a general contractor ever will.
Why Latch & Post Gate Repair Is Westchester’s Preferred Gate Installation Company
Westchester homeowners call us because we treat the gate installation the way they would treat their own front walk. We wear shoe covers and lay drop cloths before we step inside your home. We ask before we move anything near the gate or the wall it hangs from. We explain the written price before the work starts, so the invoice and the quote match exactly. That routine is built into every visit, and it is why families with kids and dogs keep recommending us along Bird Road and Coral Way.
We have been part of the Cedarwell family since 2009, and our focus never changed: gate repair, gate installation, and electric gate work only. Cody Beckman leads the crew. He does not send a general handyman to assess a welded iron gate that predates current Miami-Dade wind codes. He sends a technician who has probed pilaster faces, checked hinge plate corrosion, and replaced operator boards on the exact block styles you see throughout Westchester’s 33144 and 33165 zip codes.
A live person answers the phone around the clock, including weekends and holidays. No voicemail tree. No callback queue. If your gate falls off its hinges at 9pm, you talk to a person at 9pm.
Automatic Gate Installation in Westchester
Automatic gate installation in Westchester usually means either adding an operator to an existing swing gate or replacing a complete system that has become too expensive to repair. In Westchester’s flat lots, the underground operator housing sits just inches above the water table during the June to November rainy season, and legacy control boards short out with depressing regularity. A new automatic gate installation with operator, safety photocells, loop detector, and keypad entry typically runs $3,200 to $6,000 in Westchester depending on the gate width, column condition, and power run distance. If the existing pilasters are sound, the cost stays at the lower end. If the pilasters need new footings, the price moves up, and we will show you exactly why in the written quote.
Operator Retrofits on Existing Gates
Some Westchester gates can accept a new operator without replacing the gate itself. The hinge plates, the post concrete, and the electrical feed all have to be verified first. We stock FAAC and BFT parts locally for Westchester customers, which keeps turnaround shorter during the wet season when failures spike.
New Gate and Operator Packages
When the old gate is welded onto corroded plates or the columns are failing, replacement is the cheaper long-term answer. A complete package includes the gate panel, galvanized posts with standoffs, operator, safety edges, and a keypad if you want entry control. We quote the whole package in writing before ordering a single part.
Gate Installation Services in Westchester
Gate installation services in Westchester cover driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates, and the right choice depends on how your lot sits and how your family uses the gate day to day. A standard single swing driveway gate with a manual latch runs $1,800 to $3,400 installed in Westchester, while a double swing gate with automation and safety sensors starts around $4,200 and runs to roughly $6,500 for wider openings. Pedestrian side gates are the most affordable path, typically $900 to $1,800. We walk the site first, measure the opening, check the columns, and hand you a written price before you commit to anything.
Pedestrian and Walk-Through Gates
A pedestrian gate keeps kids and dogs in the yard without making you open the full driveway every time. On Westchester’s compact lots, these gates usually hang from a stucco wall or a small masonry column, and the hardware must be sized for the block wall thickness, or the hinges will loosen within a year.
Driveway Security and Double Gates
Double gates split the driveway into two panels, which works well on wider Westchester lots. You can pair them with a single operator, but both panels must hang on columns that are straight and locked in place, or the automation will strip its gearbox fighting a sagging panel.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Westchester
We are factory-trained on the equipment Westchester families actually own, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite. For a Westchester installation, that matters because we are not learning a brand on your driveway. We keep FAAC and Linear operators and common boards in local stock for fast turnaround, and we can pull BFT parts for repair jobs without waiting on a distributor in another county. The same crew that installs your gate is trained to service it later, so you are not stuck explaining a warranty claim to someone else.
Common Gate Installation Problems We See in Westchester Homes
- Corroded hinge plates pulling off the pilaster. On pre-1985 ornamental iron gates that were welded directly onto rebar-tied CBS columns, the mounting plates rot away from the face while the decorative scrollwork looks untouched. The gate swings loose because its attachment point is gone, not because the hinges are old.
- Operator boards drowning during the rainy season. Westchester’s flat, low-drainage yards pond water in June through November storms, and underground operator housings flood, shorting control boards and killing legacy operators. We see this pattern year after year on lots throughout the 33144 and 33165 zip codes.
- Pre-Andrew gates that never met current wind-load codes. Miami-Dade’s post-Hurricane Andrew codes are among the strictest in the nation, and many retrofit gates on Westchester homes were never engineered to meet them. Touch the system for a repair and the compliance question surfaces immediately.
- Sagging gates quoted as a simple hinge swap. A sagging gate on a Westchester home usually means the column has moved, the hinge plate has let go, or both. Quoting a hinge swap without probing the pilaster face is a miss, and it is the most common quote we correct.
Pricing for Gate Installation in Westchester, FL
A manual pedestrian gate in Westchester runs $900 to $1,800 installed. A single swing driveway gate with manual hardware runs $1,800 to $3,400. An automatic single swing gate with operator, safety sensors, and keypad entry runs $3,200 to $4,800. Double automatic gates with full safety integration run $4,200 to $6,500. What moves these ranges: column condition, gate width, whether existing wiring can be reused, and whether the old gate has to be removed and disposed of. We give every Westchester customer a written price before work starts, always, and not a single part gets ordered until that price is on paper in your hand.
We Also Serve Cities Near Westchester
Our Gate Installation team works throughout South Florida, and we regularly serve customers in Westchester as well as Gate Installation projects in Miami. If you live just outside the neighborhood in Jacksonville, Tampa, or Orlando, call and ask, and we will tell you honestly whether we have a crew in your area that week.
Serving Westchester, FL - Our Local Coverage Area
We’re based in the Westchester area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Westchester
Whether it can be retrofitted depends entirely on the condition of the pilaster face and the hinge mounting plates, not on how the scrollwork looks. If the plates are still bonded to the concrete and the columns are straight and sound, we can often add a new operator and safety system without replacing the gate. If the plates have corroded off the pillar, replacement is the cheaper long-term answer, because any operator we hang on a failing attachment point will tear itself apart within a season. Call (626) 649-4572 and we will probe the columns and give you a written recommendation, not a guess.
Because Westchester’s flat lots pond stormwater over the underground operator housings from June through November, and water wicks into the control board and conduit connections. The fix is not another board swap, it is relocating and sealing the operator housing above the seasonal water line and correcting the drainage path away from the conduit. We do this on Westchester installations routinely now, because the wet-season failure pattern is so consistent on the neighborhood’s low-drainage blocks. Call us at (626) 649-4572 for a written price on the full correction.
Yes. Current code requires functioning safety photocells or contact edges, and many pre-2000 operators in Westchester were installed before these requirements were universal. When we install any new operator or touch an existing automatic gate, we bring the entrapment protection up to current standards, including the right sensors for the gate type and a proper force test. It is not an add-on; it is part of the installation.
Almost never on a Westchester home, especially if the gate is an older ornamental iron panel welded onto a CBS pilaster. The sag is usually the symptom and the corroded mounting plate or the shifted column is the cause. Swapping hinges on a gate whose plate is detaching from the pillar buys a few months at best. Probe first, quote second. Call (626) 649-4572 and we will do exactly that.
Only if running a safe power line to the gate would be impractical or prohibitively expensive, and on Westchester’s compact, mostly rectangular lots, that is rare. Solar openers make sense for rural or large lots where trenching would be a major job, but at a typical Casa Linda or Olympia Heights-area home, a hardwired operator is more reliable and cheaper to maintain. We will tell you which one fits your property, and the number will be in writing before anything gets ordered.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Westchester since 2009.