Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Tamarac
Gate installation in Tamarac, FL usually runs between $2,800 and $12,000 depending on the gate’s size, material, whether it swings or slides, and what needs to happen with the existing posts and footings. A straightforward single swing gate replacement with a new Viking or Ghost Controls operator typically lands in the $3,200 to $5,800 range, while a fabricated double driveway gate with a slide operator and safety edges runs higher. We serve every HOA community, condo association, and single-family home in Tamarac, and we answer the phone around the clock at (626) 649-4572 with a live person, not a queue. Tamarac is a city built around gated entries, so we understand how much a downed gate disrupts a whole community’s morning, not just one driveway.
Why Latch & Post Gate Repair Is Tamarac’s Preferred Gate Installation Company
Cody Beckman leads our installation team, and our crew has spent enough time on Nob Hill Road, McNab Road, and Commercial Boulevard to know exactly what Tamarac’s 1960s-to-1980s gate stock looks like up close. Most of the gates we install here are replacements for original wrought-iron or decorative aluminum swing gates built when these communities were first platted in the 1960s. That means the post footings are old, the operator wiring is dated, and the people approving the work are often property managers rather than homeowners. We quote every job in writing before any work starts, which matters when a board needs documentation to approve spending. Our background-checked, uniformed technicians arrive with shoe covers and drop cloths, and they photograph the cleanup before leaving. Every installation carries the 365-Day Done Right Promise: if it isn’t right, we make it right, no argument and no fine print.
Gate Opener Installation in Tamarac
Gate opener installation in Tamarac is its own discipline, because the operator has to survive salt-laden humidity from the Atlantic on one side and the Everglades on the other, plus lightning-heavy summer storms. We install gate operators from Viking, Ghost Controls, DoorKing, Elite, and the other brands families and HOAs in Tamarac actually rely on, and we always confirm UL 325 entrapment protection before we hand a gate back to daily use. A gate opener installation in Tamarac typically runs $1,100 to $2,800, which includes the motor, the control board, safety photocells, and the labor to mount and program everything. We give you a written price before any work begins, and you approve that number before we touch a single wire.
Retrofitting Gate Operators on Older Swing Gates
Many of Tamarac’s original operators were installed in the 1970s through the 1990s, and several of those models are no longer made. We replace them with current equipment that matches the gate’s weight and duty cycle. The existing posts and hinge hardware get inspected first, because putting a new motor on a rusted post simply moves the failure point.
Gate Opener Replacement for Storm-Damaged Boards
Lightning strikes and power surges are routine from June through October in Tamarac, and a fried control board means the gate is dead until the board is replaced. We stock common boards and loop detectors locally for Tamarac customers, so a surge-damaged opener often gets repaired the same visit rather than waiting on a parts shipment. If your gate opener failed after a storm, call (626) 649-4572 and we’ll get it diagnosed.
Gate Fabrication in Tamarac
Gate fabrication in Tamarac matters because so many of the city’s original gates are decorative aluminum or wrought iron built to fit specific entry monuments, and off-the-shelf panels rarely match the existing masonry or sightlines. We build gates to specification: swing gates, slide gates, double gates, and pedestrian gates sized to your exact opening, with the infill style you want and hinges designed for Tamarac’s soggy post holes and storm loading. Depending on size, material, and automation, a fabricated gate for a Tamarac home or community entry generally runs $2,000 to $7,500, and we provide a written line-item quote before fabrication begins. That number is agreed before the work starts and doesn’t climb at the end.
HOA-Matched Gate Fabrication
Many Tamarac communities have architectural review standards, and we can fabricate a gate that matches the original design language while meeting current wind-load standards for Broward County. That matters for HOA board approvals. We can put the wind-load math and gate specifications in writing for your board packet.
Pedestrian and Service Gate Fabrication
A separate pedestrian gate alongside the main vehicle gate is common in Tamarac’s villa and condo communities, and we routinely fabricate and hang those as matched pairs. It keeps residents from swinging open a ten-foot vehicle gate every time someone walks through.
Trusted Brands We Service in Tamarac
We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means the most common operators found behind Tamarac’s gates are brands we work on every week. When a Viking swing-arm operator on a single-family home off Pine Island Road fails, we know the arm adjustment procedure and the board diagnostics cold. When a Ghost Controls slide operator starts tripping its safety loop in a Woodmont community entry, we know whether the loop is bad or the board is misreading it. We keep replacement boards, remotes, and safety-edge parts in our local stock, so Tamarac customers aren’t waiting a week for a component.
Common Gate Installation Problems We See in Tamarac Homes
- Post footings that hold water. Afternoon thunderstorms in Broward County saturate the ground quickly, and a footing that drains poorly lets the hinge post drift. A new gate hung on an old wobbling post is the most common cause of early sag in Tamarac, and we address the footing before the panel goes up.
- Rust at the hinge and weld joints. Tamarac’s inland humidity carries salt off the Atlantic and the Everglades, and it quietly eats steel hinges, weld joints, and operator gearboxes year-round. A gate that looks fine on the outside may have hinge welds that are structurally thin beneath the paint.
- Control boards and loop detectors after summer squalls. Lightning-surge damage is a routine call for us between June and October. The gate is down, the board is fried, and the association needs a written estimate that includes UL 325 entrapment protection confirmation before any release or repair can proceed.
- Wind load on solid infill gates. A fully sheeted or closely spaced picket gate catches a lot of wind in a band of storms. Gates that met code forty years ago may not meet current Broward wind-load expectations, and we factor that into fabrication and hardware selection on every Tamarac install.
Pricing for Gate Installation in Tamarac, FL
We price in ranges so you can plan, and you’ll see an exact written number before anything starts. A single swing gate replacement with one operator in Tamarac commonly runs $2,800 to $5,800. A double driveway swing gate with two operators runs $5,500 to $9,500. A sliding gate fabricated and automated for a community entrance typically falls between $6,000 and $12,000. Pedestrian gate fabrication and installation with a good lock and closer runs $1,400 to $3,200. The larger the gate, the heavier the infill, and the more structural work on the posts, the higher the price. Estimates are free, and the quote you approve is the price you pay.
We Also Serve Cities Near Tamarac
While this page focuses on Tamarac, our Gate Installation team also covers surrounding South Florida communities. If you’re in Tamarac or nearby, we can help with gate repair, replacement, and automation. We regularly serve customers in Jacksonville, Miami, Tampa, and Orlando, and dispatch is coordinated through our Miami office for all South Florida work.
Serving Tamarac, FL - Our Local Coverage Area
We’re based in the Tamarac area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Tamarac
It often is. Many Tamarac entry gates built in the 1960s through the 1980s were hung on posts and footings never designed to carry a slide gate’s weight or rail loads. Converting to a slide gate usually means new footings, larger posts, and a poured slab for the track, which we scope in writing before the board votes. We’ll tell the board exactly what’s structurally possible and what the price difference is, so they can make a fully informed call. Call (626) 649-4572 and we’ll put it in writing.
Every automated gate in Tamarac should have a marked manual release that disengages the operator so the gate can be moved by hand. On a swing gate, that usually means a release handle on the operator; on a slide gate, a keyed release or chain-driven override. During a power cut, the gate should be released, moved to the position your community designates as secure (fully closed or fully open, depending on the fire access plan), and pinned or locked in place. We show every property manager and board contact this exact procedure during installation.
Yes. UL 325 requires entrapment protection on automated gates, and in Florida that means working photo-eyes or an equivalent non-contact safety device. If we install a new gate or operator in Tamarac, safety photocells and a functioning obstruction-reversal system are part of the job, full stop. We don’t offer installs without them, because it’s both a safety and a liability issue for the community.
Water, mostly. Tamarac has sandy, fast-draining soil in some pockets and poorly draining muck in others, and post footings that hold water after afternoon storms let the hinge post lean or sink. Once the post moves, the gate hangs wrong and begins to sag, which strains the hinges and the operator until something fails. We replace bad footings and install galvanized hinge post anchors where the soil has been causing repeated sag corrections.
We answer every call 24/7 with a live person, and we prioritize a storm-downed HOA entry gate in Tamarac as an emergency call when the community’s entry or exit is compromised. Once we’re on site, we diagnose the issue and hand you a written estimate for the repair, with the UL 325 entrapment protection confirmation attached, so your board can approve the work the same day. Call (626) 649-4572 the moment the gate goes down.
Contact Us for Gate Installation in Tamarac
From Kings Point to Woodmont to the single-family streets off Commercial Boulevard, we install and automate gates across Tamarac, and we treat your home and your community entry as if they were our own. That means a written price before any work begins, shoe covers and drop cloths when we step inside, a cleanup photo before we leave, and the 365-Day Done Right Promise behind every installation. Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on. Call (626) 649-4572 today for a free written estimate.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Tamarac since 2009.