Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Sunrise
Gate installation in Sunrise runs between $2,800 and $9,500 for most residential projects, with automatic driveway gates landing between $4,200 and $8,800 on average. We schedule most Sunrise installs within 3 to 7 days once materials are confirmed, and we’ll give you a written price before any metal is cut. Call (626) 649-4572 and a live person answers, day or night.
Sunrise has a very specific set of conditions that shape how gates fail, what lasts, and why the install matters more here than in other parts of Broward. We know the HOA communities, the canal-side lots, and the older operators still turning at Sunrise Lakes. That local familiarity means we spec the right steel and the right hardware the first time.
Why Latch & Post Gate Repair Is Sunrise’s Preferred Gate Installation Company
Sunrise homeowners keep calling us back because we do the unglamorous things most gate companies skip. We put shoe covers on before stepping inside the house to hand you the written quote. We lay drop cloths down where an interior door needs to be accessed for a keypad or intercom run. And we send you a photo of the cleanup before we pull out of the driveway.
Our crew works in Sunrise neighborhoods every week. We know the communities off Nob Hill Road, the gated sections along West Oakland Park Boulevard, and the 55-plus developments where a downed gate means a whole block of residents is stuck. The work is done by background-checked, uniformed technicians, and every call to Latch & Post Gate Repair is answered by a person, 24 hours a day, seven days a week.
Most important, we quote a fixed written price before any work begins, and the 365-Day Done Right Promise covers the whole installation. If something isn’t right a month or a year later, we make it right. No argument, no fine print.
Gate Fabrication in Sunrise
Gate fabrication in Sunrise is often the smarter path than buying an off-the-shelf panel, because the local conditions eat standard hardware faster than they should. We build gates to the size and swing of your specific opening, and we spec materials that hold up to Everglades-buffer humidity and the canal damp that creeps into everything on the west side of the city.
Fabrication prices start around $1,800 for a basic single pedestrian gate and run to $6,500 or more for a large custom double driveway gate in powder-coated aluminum. You’ll see the exact number in writing before we order a single length of steel.
When Fabrication Makes Sense
If your opening is non-standard, your HOA requires a specific look, or the original gate was built for the house and no standard panel fits, fabrication is the only real option. We do it in-house through our Cedarwell fabrication partners, which keeps lead times shorter than you’d expect for custom work.
Sunrise HOAs are strict about gate appearance, especially in the master-planned communities. Fabrication gives you a gate that matches the community’s aesthetic, instead of something that looks like a compromise.
Materials That Last Near the Everglades
On the west side of Sunrise, we recommend powder-coated galvanized steel or marine-grade aluminum over painted hollow steel. Galvanized frames resist the constant airborne moisture. 316 stainless hinge hardware and latch bolts should be standard, not an upgrade. These choices cost roughly $400 to $800 more up front, and they buy you years of extra life in this climate.
Automatic Gate Installation in Sunrise
Automatic gate installation in Sunrise costs between $4,200 and $8,800 for a full system on a single gate, including the operator, safety sensors, keypad or remote controls, and all low-voltage wiring. For a double gate or swing gate with two operators, expect $6,500 to $12,000 depending on the brand and panel weight.
The operator itself is only one piece. We want to see solid posts, correct hinge geometry, and proper clearance before we mount anything. A good automatic system starts with a gate that swings or slides true.
Operator Choices for Sunrise Conditions
LiftMaster and FAAC operators have held up well in Sunrise when installed on a raised pad with stainless anchor hardware. BFT and DoorKing are also solid choices, especially for heavier slide gates. We mount operators above grade and route low-voltage wiring in conduit so canal-side moisture and iguana activity don’t take the system down early.
What’s Included in Every Automatic Install
Every automatic gate installation includes entrapment protection, which is non-negotiable. You get safety photocells, edge sensors where the gate design calls for them, proper force settings, and a post-install walkthrough so you know exactly how the system should stop and reverse if anything is in the path. The written quote lists all of this before we start, so there’s no line item that surprises you later.
Trusted Brands We Service in Sunrise
We’re factory-trained on the brands Sunrise homeowners actually have and want: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Sunrise’s older HOA communities, we commonly work on Gate, Viking, and DoorKing systems that have been running for 20 to 30 years. Because we service these brands daily across Broward, we keep common control boards, receiver boards, and safety sensor parts ready, which shortens turnaround when a community entrance goes down.
Common Gate Installation Problems We See in Sunrise Homes
- Hinge-post sag from constant humidity: The hinge post rots or the footing settles before the gate panel wears out. In Sunrise, a gate that drags or won’t latch is usually failing at the post, not in the middle of the leaf.
- Iguana damage inside operator housings: Green iguanas nest in ground-mounted housings, chew low-voltage wiring, and jam slide-gate tracks. We spec raised pads and sealed conduit on new installs specifically because of this.
- Corroded operator circuit boards: Airborne moisture from the Everglades buffer gets into enclosures even when they never see direct rain. Boards corrode from the inside out, which is why grounding and a sealed enclosure matter as much as the operator brand.
- HOA access coordination delays: Many Sunrise gates serve whole communities, not individual driveways. Repairs and installs often require HOA approval, after-hours access-code coordination, and resetting shared keypads before the gate can be cycled safely.
Pricing for Gate Installation in Sunrise, FL
A standard single driveway gate in Sunrise runs $2,800 to $5,500 installed. A double swing gate with automation runs $6,500 to $12,000. Pedestrian gates run $1,200 to $2,800. What moves the number: panel size, material choice (galvanized steel versus marine-grade aluminum), operator brand, whether we’re reusing existing posts or pouring new footings, and how much low-voltage trenching the property needs.
Every quote is written, itemized, and handed to you before any work starts. You’ll never get a verbal number followed by a surprise invoice. Call (626) 649-4572 for a free estimate. There’s no charge for us to come out, measure the opening, and put a written price in your hand.
We Also Serve Cities Near Sunrise
While this page is for Sunrise, our Gate Installation crews also handle projects in Jacksonville, Miami, Tampa, and Orlando. If you’re in one of those areas, the same written pricing and 365-Day Done Right Promise apply. This page is tailored to Sunrise specifically because the conditions here are distinct from those cities.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Sunrise
Because Sunrise sits against the Everglades buffer, not the open coast. The air here carries more consistent background humidity than oceanfront cities, and the canal system keeps that moisture in the soil and the air year-round. Salt spray is episodic and visible; this inland humidity is constant and invisible, and it corrodes hinge hardware, welds, and operator boards steadily. The fix is spec, not paint: galvanized frames, 316 stainless hardware, sealed enclosures, and raised operator pads.
Because they were all installed around the same time, in the same community, under the same conditions. When a Sunrise Lakes or similar development installs a dozen operators in the same build phase, they age together, their boards corrode together, and they start failing within months of one another. That’s why one community board renewal can mean a wave of simultaneous replacements. We handle that scale regularly, coordinating with HOA management and scheduling work in phases so gate access is never down for more than necessary.
Iguanas nest inside ground-mounted operator housings and chew low-voltage wiring, which takes out safety loops and photocells before the motor itself fails. On new installs in Sunrise, we use raised pedestals, sealed conduit, and stainless hardware to keep them out. On existing gates, we retrofit enclosures so the same damage doesn’t happen twice.
Yes. Every automatic gate in Sunrise, like everywhere in Florida, must have working entrapment protection: safety photocells, edge sensors where applicable, proper force settings, and correct cycle testing. This isn’t optional equipment we suggest; it’s a life-safety requirement. We include it in every quote and verify it before we leave.
Before any post goes in, we confirm the hinge-post footing is deep and true, the hardware is 316 stainless, the operator will sit on a raised pad with sealed conduit, and the panel material is galvanized or aluminum. That’s the Sunrise-specific before-work checklist. If a post is going into ground that’s constantly damp from canal drainage, we over-excavate and use more concrete than we would elsewhere. The spec has to be right before the gate hangs, because fixing it later means tearing the whole thing out.
Need a straight answer on your gate project in Sunrise? Call (626) 649-4572. A live person answers, every time. You’ll get a written price, done right, backed by the 365-Day Done Right Promise.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Sunrise since 2009.