Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Calabasas
Gate installation in Calabasas usually costs between $4,800 and $18,000 depending on the gate style, operator type, and how much of the job runs through HOA architectural approval. Most of our Calabasas installs take two to six weeks from initial measure to final walk-through, and a good third of that time is often waiting on a community review board rather than physical work. We know this because we do this work here every week. If you’re weighing a new driveway gate, a pedestrian gate, or a full community entrance system, call us at (626) 649-4572 and we’ll walk you through what your specific street and HOA actually require.
We’re not a general handyman service. Gate Installation is all we do, along with gate repair and electric gate repair. Our focus means we know the Calabasas gate landscape the way a local should: which communities in The Oaks or Calabasas Park Estates require powder-coated finishes, which canyon-facing properties need heavier hinge reinforcement, and which management companies move fast on approvals and which ones don’t.
Why Latch & Post Gate Repair Is Calabasas’s Preferred Gate Installation Company
We’ve been part of the Cedarwell family since 2009, and our Calabasas customers tend to find us the same way: a neighbor’s gate finally gave out, or a management company needed someone who could handle a multi-lane entrance system without six callbacks. Cody Beckman leads our team, and the way we work in Calabasas hasn’t changed since the beginning. Written price before any work starts. Shoe covers and drop cloths on every visit, plus a photo of the clean-up before we leave. If the install isn’t right, the 365-Day Done Right Promise means we make it right. No argument, no fine print.
Calabasas homeowners care about how a crew behaves inside the house as much as how the gate turns out. We do too. Our technicians are background-checked, uniformed, and trained on the brands most common here: FAAC and Linear operators on older estate gates, BFT on newer community systems, Viking on commercial-spec slide gates. When we step inside to run wiring or program a keypad, we put on shoe covers first. Your floors stay clean. If kids are napping, we use quiet tools and knock before touching anything.
Automatic Gate Installation in Calabasas
Automatic gate installation in Calabasas means pairing a gate that meets your community’s architectural standards with an operator that can handle canyon wind load and daily use without burning out early. The job typically runs $6,500 to $14,000 for a single-family driveway system, including the operator, safety sensors, keypad or intercom, and the concrete pad work. On corner lots in Calabasas Park Estates and along Mulholland Highway, we routinely recommend a heavier-duty operator than the gate’s weight alone would suggest, because the Santa Ana gusts coming off Palo Comado Canyon push hard against the gate face and strain smaller units fast.
In a community like The Oaks of Calabasas, automatic gate installation on an estate entrance also means coordinating with the management company on access control integration. If the HOA uses RFID tags or video intercoms at the front gate, your new gate should tie into that system rather than sit on its own separate keypad. We handle that coordination as part of the install. You shouldn’t have to be the middleman between your gate installer and the community’s access vendor.
Driveway Gate Systems
A custom driveway gate in Calabasas, whether it’s a swing gate on a side lot or a sliding gate across a wider apron, runs $5,500 to $12,800 installed. We fabricate the gate to your community’s finish and height specs, set the posts on new concrete footings, and mount the operator with adjustable safety edges and photo eyes. On steep canyon lots, we often build a custom bottom track for slide gates so the gate doesn’t bind when the grade shifts.
Pedestrian and Security Gates
Pedestrian gates and side-yard security gates in Calabasas run $1,800 to $4,200 depending on the opening width and whether you want a basic keyed latch or an integrated keypad with strike release. We install these on estate side entries, pool equipment enclosures, and rear-yard access points. If your HOA requires a specific finish, we match it on the first trip, not the third.
Gate Installation Services in Calabasas
Gate installation services in Calabasas cover more than the gate itself. A full install includes the gate and posts, the operator, the safety sensor loop or edge, the keypad or intercom station, the conduit run to power, and the final torque and alignment check on every hinge and rack. We quote the whole job in writing before the first footing is dug. On a typical Calabasas estate, that quote falls between $5,000 and $16,000 depending on the gate span, the operator class, and the complexity of tying into an existing HOA access system.
In luxury communities along Parkway Calabasas and Las Virgenes Road, we also handle double driveway gates and community entrance systems. These are heavier jobs, often involving a pair of swing gates or a cantilever slide gate across a 20-foot or wider opening, with vehicle detection loops cut into the asphalt. The gate has to open and close smoothly a hundred times a day. Our installs are spec’d for that duty cycle from the first measure.
Double Gate and Estate Entrance Packages
A double swing or slide gate for a Calabasas estate runs $8,500 to $18,000 installed. We build both leaves to match in finish and hang weight, install a single operator or paired operators depending on the opening, and set the safety edges so the gate can’t pinch a child or pet. On homes with a long driveway approach, we also run the keypad station at the vehicle height that makes sense for the driver, not just wherever the conduit is easiest to pull.
Community Entry and HOA Gate Systems
For multi-lane community entrances in Calabasas, we work directly with the management company on spec, approval, and scheduling. These jobs usually run $12,000 to $30,000 or more, depending on the number of lanes, the RFID or video intercom integration, and whether the existing loop detectors can be reused. HOA installs here almost always move through architectural review first, so we submit the spec sheet, finish swatch, and access plan early to keep the job from stalling.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Calabasas
We service and install the gate brands Calabasas homeowners and HOAs actually use. That includes FAAC and Linear operators, both common on older 1980s and 1990s estate gates throughout Calabasas Park Estates and Hidden Hills-adjacent streets, plus BFT and Viking on the newer community systems and commercial-spec slide gates. Because we work on these brands every week in Calabasas, we keep the most common boards, capacitors, and sensors on our trucks, so a diagnosed problem usually gets fixed the same visit. No waiting a week for a part to ship from a distributor.
Common Gate Installation Problems We See in Calabasas Homes
- HOA approval stalls the job. A gate install that should take two weeks sits idle for six because the architectural committee asked for a different finish swatch or kicked back the keypad placement. We submit the full spec sheet up front to minimize that back-and-forth.
- Canyon wind warps slide tracks and hinge posts. Repeated lateral gusts off Palo Comado Canyon loosen hinge bolts and bow cantilever tracks far faster than in Woodland Hills or Encino. We set posts on deeper footings and use heavier-gauge track on west-facing slide gates.
- Post-Woolsey rebuild gates hitting the 5-7 year mark. Homes rebuilt after the 2018 Woolsey Fire got brand-new gates and operators, and those systems are now aging out together. Capacitor failure, dead battery backups, and worn hinges are showing up in the same neighborhoods all at once.
- Homeowner keypads that can’t tie into the community system. A gate works fine on its own keypad, but the HOA’s RFID reader or video intercom can’t talk to it. We install operators and access panels that integrate with what the community already uses.
Pricing for Gate Installation in Calabasas, CA
Here’s what gate installation actually costs in Calabasas.
- Pedestrian or side-yard gate: $1,800-$4,200
- Single driveway swing gate with operator: $5,500-$9,800
- Double driveway gate with operators: $8,500-$16,000
- Slide gate across a wider apron: $7,200-$14,500
- Community entrance or HOA multi-lane system: $12,000-$30,000+
What moves the number is gate span, finish work, operator class, and how much access integration your HOA requires. Every quote is written out before we start, and the price you see is the price you pay. Estimates are free. Call (626) 649-4572 and we’ll come measure your opening and talk through what your community will approve.
We Also Serve Cities Near Calabasas
If you’re in Topanga, Agoura Hills, Oak Park, or Westlake Village, we serve those communities too. Many of our Gate Installation in Calabasas customers also own property in the surrounding foothill cities, and the same wind-load and HOA realities apply across those borders. One call to (626) 649-4572 covers the whole area.
Serving Calabasas, CA - Our Local Coverage Area
We’re based in the Calabasas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Calabasas
In most Calabasas communities, yes. Communities like The Oaks, Calabasas Park Estates, and Mountain View Estates run gate style, height, finish color, and even keypad visibility through their architectural review committee before any work begins. We prepare the spec sheet, finish swatch, and access plan to submit with your request, and we don’t schedule the physical install until the approval lands. Call (626) 649-4572 and we’ll help you figure out what your specific CC&Rs require.
Wind is the biggest reason. Calabasas sits at the mouth of Palo Comado Canyon, and the Santa Ana gusts that funnel through there push hard against gate faces, loosen hinge bolts, and warp cantilever slide tracks. A gate that lasts 15 years in Woodland Hills might fail at 8 here. We install with that load in mind: heavier-gauge track, deeper post footings, and operators sized above the gate’s minimum requirement. Call (626) 649-4572 for a free assessment of how your gate is holding up.
Yes. We install gates and operators that integrate with the RFID readers, video intercoms, and vehicle detection loops already running at the community’s main entrance. That means your new gate responds to the same tag or call box the HOA uses, instead of operating as a separate island. We coordinate the spec with the management company before the install so the approval process doesn’t get tangled. Call (626) 649-4572 to discuss what your community runs.
The sag came first, and the operator failure is usually the result of it. When a Calabasas gate’s hinge post leans or its hinge bearings wear, the leaf drops, and the operator has to work against the misalignment every cycle. In The Oaks of Calabasas we replaced a failing swing gate operator on a steel estate gate whose hinge post had begun to lean after years of Santa Ana gusts. We pulled the post, reset it on a new concrete footing, corrected the rack and pinion alignment, and swapped in a LiftMaster unit the HOA’s management company had already approved. The gate has run clean through two wind seasons since. Call (626) 649-4572 if your gate is sagging; fixing the post first often saves the operator.
Yes. California requires automatic gate operators to be fitted with safety devices that prevent the gate from closing on a person, child, or pet. That means photo eyes across the gate opening, contact safety edges on the gate leaf, or both depending on the operator type. We install these as standard on every automatic gate job in Calabasas. Call (626) 649-4572 to talk through what your specific gate and opening will need.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Calabasas and the surrounding foothill communities.