Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Calabasas, CA
Calabasas gate work follows a different rhythm than most of Los Angeles County. The homes here sit on canyon slopes, face brutal Santa Ana gusts, and often sit inside some of the most tightly governed HOA communities in the region. A gate that would be a simple latch swap in a flat valley neighborhood can be a full operator replacement and hinge realignment here. We work on ornamental steel gates, powder-coated estate gates, and the multi-lane entrance systems that guard Calabasas communities. If you’re seeing a gate sag, a motor strain, or a keypad that quit responding, call (626) 649-4572 and we’ll walk through what you’re dealing with.
Why Calabasas Homes Are Different
The gate stock in Calabasas tells the story of the city: 1980s and 1990s master-planned estates with ornate wrought iron and powder-coated steel gates, many on lots that rise and fall with the foothills. Flat-valley installs don’t ask much of a hinge. A gate on a canyon grade pulls constantly downhill, and that changes how the hinge leaves wear, how the post settles, and how often the operator has to fight gravity on every cycle.
Then there’s the wind. Calabasas sits at the mouth of Palo Comado Canyon, where Santa Ana events funnel through with lateral gusts that strip hinge bolts and warp cantilever slide tracks. We see swing operators that burn out years earlier than their flat-land counterparts, not because they were installed wrong, but because they’ve been working against 60 and 70 mile-per-hour crosswinds since the day they went in. The Woolsey Fire added another layer: dozens of estate gates rebuilt after 2018 are now at the five-to-seven-year mark where capacitor failures and battery backup swaps become routine. If your gate was installed or replaced after the fire, it’s worth a close look this year.
Our Main Calabasas Services
Most calls from Calabasas come down to two things: a gate that won’t move or seal, and an operator system that stopped responding. Here’s how each plays out locally.
Gate Repair in Calabasas
Hinges, latches, posts, and track systems carry extra load in Calabasas because of the grades they’re mounted on. We see bottom tracks that have worn into an oval shape, hinge leaves that have pulled away from powder-coated posts, and latch strikes that no longer line up after a few seasons of canyon wind. Gate Repair in Calabasas covers everything from a misaligned estate gate to a sagging community entrance gate. We check the post base, the hinge geometry, the track wear, and the latch throw, then give you a written price before we touch a tool.
Gate Installation in Calabasas
New gate work in Calabasas usually means matching existing powder-coated steel or replacing a burned-out estate entry with something quieter and better weighted for the wind. Gate Installation in Calabasas handles custom hinge placement on sloped lots, bottom-track fabrication for uneven drives, and operators sized for the gate’s actual weight and wind exposure, not a generic spec sheet. We also work with HOAs and community managers, so the approval process and the procurement paperwork don’t stall the project.
Electric Gate Repair in Calabasas
When the motor runs but the gate doesn’t move, or the keypad lights up but the arm won’t swing, the issue is usually the operator, the loop detector, or the control board. Calabasas systems face wind-driven motor strain and occasional power surges through the canyon. Electric Gate Repair in Calabasas diagnoses operator capacitors, battery backups, photo eyes, and vehicle detection loops on LiftMaster, FAAC, and BFT systems, among others. We carry common replacement parts so most calls get resolved in one visit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Calabasas
Our technicians are factory-trained on the operators Calabasas homeowners and HOAs actually run: Viking, Ghost Controls, DoorKing, Elite, LiftMaster, FAAC, BFT, Linear, and Mighty Mule. We stock common boards, batteries, and loop detectors so a service call doesn’t turn into a two-week wait. See our brands for the full list.
Pricing for Gate Company in Calabasas, CA
| Service | Typical range in Calabasas |
|---|---|
| Gate latch replacement | $140 - $310 |
| Hinge replacement (single gate) | $180 - $390 |
| Hinge replacement (double gate) | $290 - $540 |
| Gate sag correction and realignment | $210 - $460 |
| Weld repair on steel gate frame | $160 - $380 |
| Gate track and roller replacement | $240 - $520 |
| Operator capacitor replacement | $160 - $340 |
| Battery backup replacement | $230 - $470 |
| Photo eye or safety sensor replacement | $140 - $300 |
| Vehicle detection loop repair | $280 - $600 |
| Full gate installation (single swing) | $2,400 - $6,800 |
| Electric operator installation | $1,900 - $4,700 |
Calabasas jobs trend toward the upper end of these ranges when the gate is oversized, the post has shifted on a canyon grade, or the work is on a multi-lane HOA entrance rather than a single residential drive. You’ll always see the exact number in writing before we start, and that number is the one on the invoice.
Neighborhoods We Serve in Calabasas
We run calls across Calabasas from The Oaks to the canyon neighborhoods along Las Virgenes Road. Most calls get same-day or next-day service depending on the part and the time of day you reach us.
- The Oaks of Calabasas
- Calabasas Park Estates
- Mountain View Estates
- Palo Comado Canyon
- Las Virgenes corridor
Service Area – Cities Near Calabasas
Latch & Post Gate Repair covers Calabasas and the surrounding foothill communities. Dispatch and scheduling are coordinated from the brand’s Los Angeles office, with crews serving Calabasas locally. We also work in Topanga, CA, Agoura Hills, CA, Oak Park, CA, and Westlake Village, CA.
Serving Calabasas, CA - Our Local Coverage Area
We’re based in the Calabasas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Calabasas
We answer the phone live around the clock, and for urgent calls from Calabasas we typically arrive the same day if a technician is available. A gate stuck open is a different priority than a gate that’s noisy, so tell us what’s happening when you call and we’ll be straight with you about timing.
Yes. A large share of our Calabasas work is on HOA-governed community entrances, so we’re used to coordinating with management companies, following architectural committee requirements, and providing the documentation and written quotes that boards need before approving work.
We serve Calabasas and the nearby foothill and canyon communities, including Topanga, Agoura Hills, Oak Park, and Westlake Village. If you’re just outside those areas, call and we’ll tell you honestly whether we can get to your gate.
Call (626) 649-4572 for a free estimate on any gate repair, installation, or electric gate work in Calabasas. A live person answers, and you’ll get a written price before anything is touched.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Calabasas Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco