Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Burleson
Gate installation in Burleson usually runs between $2,800 and $9,500 depending on whether you’re replacing an aging subdivision driveway gate or building a new pipe-panel ranch gate on acreage off FM 1187. We serve the whole city, from the 2000s-era neighborhoods off Alsbury Boulevard out to the older FM-corridor properties, and we always hand you a written price before any work begins. Call (626) 649-4572 and a live person answers, any hour.
Burleson sits at a strange crossroads for gate work. Half our calls are ornamental-iron driveway gates in HOA subdivisions built around 2005. The other half are tube-steel ranch gates on clay-heavy acreage where the ground itself keeps moving. That split is the whole job here, and it’s why a general handyman struggles. We’re Gate Installation specialists, not a fence company that also hangs gates. Burleson’s soil swells in spring and cracks in August, and we plan footings for that reality, not for a textbook somewhere else.
Why Latch & Post Gate Repair Is Burleson’s Preferred Gate Installation Company
Most of our Burleson customers call us because a neighbor, an HOA board, or a local realtor told them to. That’s how it works in a city this size. We’ve replaced operators in the neighborhoods behind Alsbury Boulevard, rebuilt sagging gates along McAlister Road, and set new footings for ranch gates out past FM 731. The repeat business in Burleson comes from doing the unglamorous part right: the post depth, the hinge alignment, the operator torque settings. Cody Beckman has built the team around that principle since 2009, when Latch & Post joined the Cedarwell family of independently operated gate specialists.
Every technician who comes to your Burleson home is background-checked, uniformed, and factory-trained on the brands families here actually own: LiftMaster, FAAC, BFT, Linear, Viking, and the rest of the list we carry parts for locally. We lay drop cloths before stepping inside, put shoe covers on, and send you a photo of the cleanup before we leave. If the installation isn’t right, our 365-Day Done Right Promise means we come back and make it right. No fine print, no argument. That’s the only way we know to do this work in a city where word travels fast.
Driveway Gate Installation in Burleson
Driveway Gate Installation in Burleson typically costs $3,200 to $7,800 for a complete ornamental-iron replacement with a new automatic operator, and the single biggest variable is whether your existing posts can be salvaged or need new concrete footings. Most of the subdivision gates we see off Alsbury and McAlister were hung with posts sunk 30 to 36 inches, which Blackland clay doesn’t respect. After a wet spring, those posts heave. By late summer they’ve pulled a quarter-inch out of plumb and the latch won’t line up. We set our replacement footings deeper and wider than the original builder spec, because we know this soil.
Ornamental Iron and Steel Driveway Gates
For HOA communities, the gate style is usually dictated by covenant. We work with local fabricators to match the subdivision’s existing ornamental-iron look, so the replacement doesn’t stand out on the block. The automatic operator is where Burleson homeowners make the most common mistake: buying a big-box opener rated for a lighter gate than they actually have. We size the operator to the gate’s actual weight and swing arc, which is the difference between an opener that lasts eight years and one that strips its gears in two.
Pipe and Ranch-Style Driveway Gates
On the acreage side of Burleson, along FM 1187 and FM 731, driveway gates are working gates. They hold livestock, they hold kids, they get hit by wind. A new pipe-panel gate with a solar-capable automatic operator usually lands between $4,000 and $9,500. The foundation is everything here: we drill and set posts below the clay’s active shrink-swell zone, then correct for any existing lean before hanging the panel. That’s not a detail. It’s the whole job.
Sliding Gate Installation in Burleson
Sliding Gate Installation in Burleson runs $4,500 to $11,000 for a new cantilever or V-track system, and it’s the right call when a driveway slopes upward from the street or when a swing gate would arc into the neighbor’s property line. We see this more on the east side of town where lots are tighter and setbacks leave less room for a swinging leaf. Cantilever sliding gates have no ground track to jam with gravel or reeds, which matters on ranch entrances where the gate has to keep rolling through mud season.
Cantilever Slide Gates for Sloped or Uneven Driveways
A cantilever gate rides on rollers mounted to offset posts, so it never drags on the ground. That solves the two problems we see most on Burleson acreage: gravel migration into a track and seasonal ground movement under a gate that was never meant to ride on shifting clay. We set the carrier posts in concrete that extends past the frost line and the shrink-swell zone, then shim and level each roller before the gate panel goes on.
Tracked Slide Gates Where Space Is Tight
When a subdivision lot off McAlister Road can’t fit a cantilever system, a V-track slide gate gets the job done in a smaller footprint. The tradeoff is maintenance: the track needs to stay clear of dirt and lawn clippings. We install a concrete pad under the full travel path, not just the post bases, so the track doesn’t settle unevenly. For most Burleson homeowners, this is the quieter and cheaper option when the driveway is flat.
Trusted Brands We Service in Burleson
Factory training matters more here than people expect. Burleson’s mid-2000s build wave put a lot of LiftMaster, GTO, and Linear operators on the ground, and those three brands are where we spend most of our parts budget. We’re also trained and stocked for FAAC, BFT, and Viking, which show up on the higher-end acreage gates and a few of the newer luxury subdivisions. Because we carry local parts inventory for Burleson jobs rather than drop-shipping everything from a warehouse, a straightforward operator swap often happens in one visit. When a part is genuinely obsolete, we tell you on the spot and quote a replacement instead of stringing the job out.
Common Gate Installation Problems We See in Burleson Homes
- Posts heaved out of plumb by Blackland clay. Spring and winter rains swell the soil, summer drought shrinks it, and over a decade the cycle slowly works a gate post loose from its footing. The latch misaligns and the gate starts dragging or refusing to close.
- Aging subdivision operators hitting end-of-life together. The neighborhoods off Alsbury Boulevard and McAlister Road were built in a tight window, so hundreds of LiftMaster and GTO openers are now 15-20 years old with obsolete control boards. We replace more full operators in these subdivisions than anywhere else in the metro.
- January ice storms freezing operators and cracking boards. Burleson gets a concentrated burst of gate damage every winter. Roller axles seize, circuit boards short from condensation, and wooden gate panels split. We stock cold-weather lubricants and keep motors warmed for these calls.
- Builder-installed gates missing modern entrapment protection. A lot of the original driveway gates from the mid-2000s were installed before current UL 325 expectations. Photocells are often missing or failed, and edge sensors are rare. We check for these on every install and retrofit them as part of the quote.
Pricing for Gate Installation in Burleson, TX
A standard ornamental driveway gate replacement in a Burleson subdivision runs $3,200 to $7,800. A new automatic operator alone for an existing gate is $1,400 to $3,900. On the ranch side, a pipe-panel gate with underground posts and a solar-ready opener lands between $4,000 and $9,500, and a cantilever sliding gate starts around $6,000. What changes the number is post condition, gate weight, operator type, and whether we’re dealing with HOA spec or open farmland. You’ll get a written quote before we order anything, and the number on that page is the number you pay. Call (626) 649-4572 for a free estimate. We’ll measure, talk through what needs replacing, and tell you which parts can honestly be retrofitted.
We Also Serve Cities Near Burleson
Our crews cover the whole southern Tarrant and northern Johnson County area. If you’re just outside the Burleson city limits, we regularly handle Gate Installation in Burleson work plus jobs in Crowley, Joshua, Alvarado, and Kennedale. Same live-answer phone, same written pricing, same cleanup routine in every one of those towns.
Serving Burleson, TX - Our Local Coverage Area
We’re based in the Burleson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Burleson
Most of the 2005-era LiftMaster residential operators we see in Burleson are past the point of economical repair. The control boards are discontinued, the rack and pinion gears are stripped or close to it, and the replacement parts cost more than a new operator within a couple of years. We were called to a home off Alsbury Boulevard where the rack was fully stripped on an ornamental-iron swing gate; the quote for a full operator swap was less than chasing three obsolete parts and gave the homeowner another decade of service. If yours has a simple capacitor or limit-switch failure, we’ll tell you that too, but about eight times out of ten on these 2005 units the honest answer is replacement. Call (626) 649-4572 and we’ll come look.
In Burleson, the hinge is almost never the actual problem. The post is. Blackland Prairie clay swells with spring rain, heaves the post a quarter-inch, and by August the whole assembly is out of plumb. Tightening the hinge just fights the symptom. The fix is re-setting the post in a deeper, wider concrete footing that sits below the active clay movement zone, then doing a sag correction on the panel. We did exactly this on a pipe-panel ranch gate off FM 1187 earlier this year where the hinge post had visibly heaved; the panel didn’t need replacing, the footing did.
Many do not. The 2004-2008 subdivision gates we inspect around Alsbury and McAlister often predate the current UL 325 entrapment-protection expectations, meaning they’re missing working photocells or have no edge sensor at all. That’s a real safety gap for kids and pets. On any install or major retrofit, we add safety photocells and an edge sensor as part of the job, not as an add-on. If your gate has a force-sensing opener but no optical sensor, we’ll flag it on the estimate.
Yes, in most cases. The gate panel itself is usually salvageable; what needs the work is the post system and the operator mounting. We set new hinge and latch posts below the clay expansion zone, correct any existing sag, then mount a solar-ready arm operator sized to the panel’s actual weight. On acreage where there’s no utility power at the gate, we spec solar kits with battery backup and a heater for winter ice. This runs $2,200 to $5,500 depending on the operator and whether we’re adding solar.
More than most people expect. A subdivision driveway gate off McAlister Road is usually ornamental iron, subject to HOA style rules, and running off household electrical. An acreage gate off FM 731 is a working gate: pipe or tube steel, often solar-powered, handling wind, livestock, and unpaved ground. The foundation spec, the operator type, the safety equipment, even the hinge hardware all change. We plan them as two different jobs because they are two different jobs in this city.
For a straight answer on your gate, call (626) 649-4572. A live person picks up, every time, and your estimate is free.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, a Cedarwell family company serving Burleson with gate installation, repair, and electric gate work.