Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Angleton
Gate installation in Angleton runs between $1,400 and $9,800 depending on the gate type, operator, and whether we’re working with clay-heavy soil that needs deeper footings. Most driveway gate projects here sit in the $2,800 to $5,600 range, and you’ll see the exact number in writing before we touch anything. We know Angleton’s properties from the wood-frame homes near downtown to the ranch entrances off FM 523 and County Road 220. Call (626) 649-4572 and a live person answers, any hour.
We’re Latch & Post Gate Repair, part of the Cedarwell family of independent gate specialists. Since 2009, we’ve focused on one thing: gates. The latch that holds them and the post that carries them. In Angleton, that means knowing how Beaumont clay moves under a gate post, how Gulf Coast humidity eats at hinges, and how a 20-foot ranch gate needs a different operator than a suburban driveway gate.
Why Latch & Post Gate Repair Is Angleton’s Preferred Gate Installation Company
Angleton homeowners call us because we show up prepared for the soil under their gate. The black clay along county roads east and south of town swells after a wet season and shrinks when it dries, which tilts posts and binds frames. A generic Gate Installation crew that only knows Houston suburbs won’t dig deep enough for that. We do. Our technicians re-pour footings below the active shrink-swell zone so the post stays plumb through wet and dry cycles, not just on the day we leave.
Every visit includes the Cedarwell Care Promise. A written price comes before work starts, not after. We put on shoe covers and lay drop cloths before stepping inside your home, and we send you a cleanup photo before we leave. That’s not an upsell. It’s just how we work. Cody Beckman leads our team, and the crews are background-checked, uniformed, and factory-trained on the brands Angleton families actually own, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
The 365-Day Done Right Promise backs every installation. If it isn’t right, we make it right. No argument, no fine print.
Driveway Gate Installation in Angleton
Driveway gate installation in Angleton is the service we build most around the lot size and gate load. In-town homes off Shanks Street or Henderson Road typically need a single swing gate or a compact slide gate with an automatic opener, while properties further out on FM 521 or south toward the Brazoria County Fairgrounds often call for a wider double-leaf swing setup to handle ranch trucks and trailers. A standard single driveway gate with operator in Angleton runs $2,800 to $5,600, depending on whether we’re adding a keypad, a safety photocell, or a solar panel where mains power doesn’t reach the road.
We start by looking at the post depth, the gate weight, and the swing or slide path. On Angleton clay, that means footings below the movement zone, not above it. The gate gets hung, the operator gets programmed to open and close fully without slamming, and the safety edges get tested with an obstruction in the path.
Ranch-Style and Wide Driveway Openings
For acreage homes and working properties, a single 10-foot opener won’t cut it. We install heavy-duty operators on gates up to 20 feet wide, sized for daily cycles and loaded weight. The operator needs a rack and pinion drive on a slide gate or reinforced hinges on a swing gate, plus a mounting plate that won’t flex when the gate moves.
Solar-Powered Operators
Plenty of driveways around Angleton end a long way from the house panel. Running power out to the gate costs thousands in trenching. A Viking or Ghost Controls solar operator with a deep-cycle battery handles a standard 12 to 16 foot gate without trenching at all, and we size the panel to the gate’s daily cycle count.
Sliding Gate Installation in Angleton
Sliding gate installation in Angleton makes sense on driveways that slope, on wide openings where a swing gate would hit a fence, and on ranches where cattle push against gates. A slide gate rides on a track or a cantilever system and doesn’t need open space to swing into, which saves yard area and handles long openings better. Typical slide gate installation in Angleton runs $3,600 to $9,800 with an operator, depending on gate length and whether we need a cantilever post system over rough ground.
Slide gates live or die by their track. Angleton’s clay shifts under a track that isn’t set on properly compacted base, and then the gate drags. We compact and level the run, set the track on a bed that drains, and choose a cantilever design when heavy equipment or livestock traffic would clog a bottom track.
Cantilever Gates for Ranch Entrances
On county road gates east of Angleton, a bottom-track slide gate collects mud, hay, and manure. A cantilever slide gate rides above the ground on rollers with no track to clog, which is the right call for most cattle-entry gates. It costs more than a tracked system, but it doesn’t need weekly scraping to keep working.
Rack and Pinion Drives on Wide Openings
For 16 to 20 foot ranch gates, a chain drive wears fast under daily use. We fit a rack and pinion drive with a LiftMaster or DoorKing operator, sized to the gate’s loaded weight. The result opens smoothly and holds up to hard cycles, which matters when livestock haulers come through twice a day.
Trusted Brands We Service in Angleton
We stock common parts for the brands Angleton gate owners already have. That means a Ghost Controls or Viking operator on a solar setup, a Linear keypad or receiver, a DoorKing control board, and LiftMaster swing arms don’t sit on a shelf in Dallas while you wait. We carry the wear items locally where possible: hinges, brackets, photocells, edge sensors, remotes, and keypads, so a same-week install doesn’t stall on a missing bracket. And because our technicians are factory-trained on each brand, the operator gets programmed right the first visit, not re-programmed after an apologetic callback.
Common Gate Installation Problems We See in Angleton Homes
- Posts set too shallow for Beaumont clay. A post set 24 inches deep on the east side of Angleton can rise an inch after a wet season, then lean as the clay dries. We dig below the movement zone and pour a wider, deeper footing so the gate frame doesn’t bind when the ground shifts.
- Rust and seized hinges from Gulf Coast humidity. Angleton’s air sits above 80% humidity most of the year. Uncoated gate hinges and hardware corrode fast, and a hinge that refuses to move puts all the load on the operator. We use galvanized or stainless hardware and coat exposed steel before we hang the gate.
- Undersized operators on wide ranch gates. A homeowner-grade opener rated for a 12-foot suburban gate won’t last on a 16-foot pipe gate that opens for a cattle trailer. We match the operator to the gate’s true loaded weight and daily cycles, or it fails within a season.
- Safety sensors skipped on automatic gates. An automatic gate without a photocell or safety edge can close on a kid, a dog, or a horse. Texas code and common sense both require entrapment protection on any automated gate. We install and test these on every operator install, no exception.
Pricing for Gate Installation in Angleton, TX
A single driveway swing gate with operator in Angleton runs $2,800 to $5,600. A larger double-leaf swing gate sits between $4,200 and $7,800. Sliding gates cost more: $3,600 to $9,800 depending on length and track type, with cantilever systems at the higher end. Solar power adds $900 to $2,100 for panel, battery, and charge controller. A basic pedestrian gate runs $900 to $2,400 installed. Longer ranch gates with heavy operators and keypad entry push toward the top of these ranges.
What moves the price: gate length, gate weight, operator duty rating, solar vs. mains power, soil prep, and whether old posts need removal and re-pouring. A written quote covers all of it before work starts. Call (626) 649-4572 for a free measure and a number you can hold us to.
We Also Serve Cities Near Angleton
Our crews cover Angleton plus Lake Jackson, Clute, Freeport, and Alvin for gate installation and electric gate work. If you’re on acreage outside city limits, that’s the kind of job we build for: long driveways, solar operators, and ranch gates that open reliably. Call us and we’ll tell you exactly when we can be there.
Serving Angleton, TX - Our Local Coverage Area
We’re based in the Angleton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Angleton
Because the original footing wasn’t dug below the active zone of Angleton’s Beaumont clay. That clay swells when wet and shrinks when dry, and a post set in the top 24 inches gets pushed up and sideways every cycle. The fix is a deeper footing below the movement zone, with a wider base, so the post doesn’t move with the soil. We’ve re-poured dozens of these on county road gates after Hurricane Harvey exposed how far the clay can lift a post.
Yes, and it’s a common setup on Angleton acreage homes where the gate sits hundreds of feet from the nearest outlet. We install solar-powered operators from Ghost Controls, Viking, and Linear, sized with a battery and panel matched to your gate’s daily cycles. No trenching, no monthly power draw, and the gate opens on a cloudy week. Call (626) 649-4572 and we’ll walk through the panel sizing for your gate width.
A cantilever slide gate with a heavy-duty rack and pinion drive, built from schedule 40 tubular steel. It clears the ground, so mud and manure don’t clog a track, and it handles wide openings from 14 to 20 feet, which gives cattle trailers room. We installed a 20-foot slide gate with a LiftMaster solar operator off County Road 220 where a swing gate’s hinges had seized from a leaning post, and rebuilt the footing deeper. That gate now cycles for livestock haulers without binding.
Humidity above 80% accelerates rust and pit corrosion on exposed steel, especially hinges, brackets, and rack teeth. We use galvanized or stainless hardware, coat exposed steel before hanging, and choose powder-coated gate frames over raw tube for outdoor runs. If an older gate has already pitted, we’ll tell you whether it’s worth reusing or cheaper to replace with a coated frame before we install the operator.
Yes. Any automatic gate needs entrapment protection, which means a photocell, safety edge, or both. These stop and reverse the gate if a person, dog, or horse is in the path. We install and test them on every automatic gate we put in, and we show you how to test them monthly. Every operator we install is wired with safety protection before the job is done. Call (626) 649-4572 for a written quote on an automatic gate with the right safety setup.
Written by Cody Beckman, owner at Latch & Post Gate Repair, part of the Cedarwell family, serving Angleton since 2009.