Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Selma
Electric gate repair in Selma usually comes down to one of three things: a motor that’s been grinding through raisin harvest dust, a control board that gave out after a 105°F afternoon, or a hinge post that finally let go after decades in the San Joaquin Valley soil. Most opener and motor repairs here run between $180 and $340, and a full control board replacement on brands like FAAC or Linear typically lands between $260 and $520. We’re Latch & Post Gate Repair, part of the Cedarwell family since 2009, and we work exclusively on gates – not fences, not general contracting. Call (626) 649-4572 and a live person answers, day or night.
Selma is its own place. The streets east of Highway 99 back up against vineyard parcels and packing sheds, and the gates on those edges work harder than anything in a purely suburban neighborhood. We know the difference between a gate that needs a limit-switch adjustment on a Floral Avenue ranch home and a tube-steel farm gate off Nebraska Avenue that needs its hinge geometry rechecked. That local read is why our Electric Gate Repair team handles Selma calls the same way every time: written price before work starts, shoe covers and drop cloths inside the home, and a cleanup photo before we leave.
Why Latch & Post Gate Repair Is Selma’s Preferred Electric Gate Repair Company
Selma homeowners call us because we answer the phone and we show up with a plan. Every call to (626) 649-4572 is picked up by a live person, 24 hours a day, 7 days a week – no voicemail tree, no callback queue. Our technicians are background-checked, uniformed, and factory-trained on the brands families in Selma actually own: FAAC, BFT, Linear, Viking, and the others you’ll see bolted to gate posts around town.
We’re a Cedarwell-family gate specialist focused on gate repair, gate installation, and electric gate repair. That’s the whole scope. Because we don’t split our attention across twenty trades, our techs bring the right parts, the right torque specs, and the right safety habits on the first visit. And every job carries the 365-Day Done Right Promise: if the repair isn’t right, we make it right – no argument, no fine print.
The C.A.R.E. values govern how we work inside your home. We clean up like it’s our own home, ask before we move or touch anything, respect your family’s time and quiet hours, and explain the price before the work. If your kids are napping, we’ll use quiet tools. If your dog is curious, we’ll close the gate behind us so nothing wanders out. These things matter just as much as the motor we’re fixing.
Gate Opener Repair in Selma
Gate opener repair in Selma usually means one of two jobs: a swing-gate arm that’s lost its range of motion, or a slide-gate operator that’s chewing through its own gears because the roller track is full of raisin harvest dust. On Selma’s post-WWII ranch homes and 1970s-80s tract houses, the opener is often the original unit installed when the gate was hung – and it’s been working against Valley heat, tule fog moisture, and agricultural grit for twenty or thirty years. Repairs typically run $180-$340, with the exact number in writing before we touch anything.
Motor and Gearbox Service
When a FAAC or BFT opener starts to labor, we open the gearbox and look for the obvious: dust paste in the worm drive, a burned capacitor, a limit switch that’s lost its setting. On gates bordering active vineyard parcels, that dust paste is the usual culprit. We flush the housing, re-lubricate with a dielectric grease rated for Valley temperatures, and reset the travel limits so the gate doesn’t slam or stall.
Control Board Diagnosis
A Linear or Viking control board that quits on a 108°F Selma afternoon is a common summer call. Heat kills electrolytic capacitors and rectifier diodes faster than anything else. We bench-test the board on-site when we can, and when replacement is unavoidable we quote the part and the labor separately so you see exactly where the money goes.
Automatic Gate Repair in Selma
Automatic gate repair in Selma covers the whole chain – the opener, the safety sensors, the remote receivers, the keypad, the hinge posts, and the gate itself. It’s rarely just one component. On a sagging steel swing gate off Golden State Boulevard, the opener is often working harder than it should because a hinge post has rotted inside its concrete footing from decades of tule fog moisture. We address the whole system, not just the symptom. Typical automatic gate repair jobs here run $220-$480 depending on what’s failed and what brand you have.
Hinge Post and Gate Alignment
Selma’s fog season runs from November through February, and the sustained low-level moisture works its way into ferrous hardware at the post base. We see hinge posts that look solid from the outside but have lost their structural grip below grade. We re-pour the footing when needed, switch to stainless fixings, and shim the gate so its weight doesn’t drag the operator into an early grave.
Safety Sensor and Limit-Switch Work
Automatic gates in Selma sometimes bind after a hard wind event or a vehicle nudge, which throws the safety sensors out of line and causes the gate to reverse mid-cycle or refuse to close. We realign the photo eyes, test the entrapment protection, and verify the limit switches are set so the gate stops where it should – not six inches past the post.
Trusted Brands We Service in Selma
Our Selma technicians are factory-trained on the brands you’ll find on the gates, sheds, and farm entrances around town: FAAC, BFT, Linear, and Viking among the main names. We stock the common wear items for those brands – capacitors, limit switches, receiver modules, and hinge hardware – so most repairs don’t wait on a parts shipment. When a Viking board needs replacing and you need the gate working before the next harvest shift, we can usually have it running the same day. For less common failures, we order direct from the manufacturer’s Central Valley distribution channel, which keeps Selma turnaround times short compared to dealing with a general contractor who has to source everything from scratch.
Common Electric Gate Repair Problems We See in Selma Homes
- Harvest dust in the roller track. From mid-August through September, fine raisin harvest dust settles into slide-gate tracks on properties that border vineyards and packing sheds. It packs into a gritty paste, grinds wheel bearings, and makes the opener motor pull more amps than it was ever designed for.
- Tule fog rust on hinges and boards. November through February fog holds moisture against ferrous hardware and operator circuit boards. Hinges rust at the pin, welds bloom with surface corrosion, and unprotected board contacts develop resistance that confuses the controller.
- Post failure before panel failure. On Selma’s older steel swing gates – the originals on 1950s ranches and 1970s tract homes – the panel usually outlasts the post. Once the post shifts inside its footing, the gate sags, drags, and transfers all that stress into the opener’s gearbox.
- Heat-failed control boards. Summer highs above 105°F push then past their thermal limits. We replace them with boards rated for higher ambient temperatures and add cooling clearance inside the operator housing where space allows.
Pricing for Electric Gate Repair in Selma, CA
A standard gate opener repair in Selma runs $180-$340. Motor replacement falls between $260 and $600 depending on whether you have a residential swing arm or a heavy slide operator. Control board replacement for FAAC, BFT, Linear, or Viking units typically costs $260-$520 including the part and bench verification. Safety sensor replacement or realignment runs $140-$240. Hinge post re-pour and gate re-hang jobs start at $350 and go up based on footing size and gate weight. These are Selma market numbers – you’ll see your exact figure in writing before we start, not after. Estimates are free. Call (626) 649-4572 and we’ll quote the job over the phone, then confirm it on-site before any work begins.
We Also Serve Cities Near Selma
Our Selma service area reaches the surrounding communities too. We take electric gate repair calls in Fowler, Parlier, Kingsburg, and Reedley, and dispatch is coordinated from our Central Valley office so scheduling stays simple. If you’re a few miles down Manning Avenue or across the Kings River in Reedley, your gate still gets the same written-price-before-work guarantee and 365-Day Done Right Promise.
Serving Selma, CA - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Selma
They fail because of the raisin harvest dust cycle. From mid-August through September, fine particulate from vineyard parcels and packing sheds settles into roller tracks and worm-drive openers on any gate within reach of the harvest. That abrasive grit accounts for more roller and motor failures in Selma during those six weeks than the rest of the year combined. The fix is usually a track flush, a gearbox cleaning and re-lubrication, and a limit-switch reset – and a late-August preventive maintenance visit before each harvest is the cheapest way to avoid it. Call (626) 649-4572 for scheduling.
Yes. The San Joaquin Valley fog season from November through February traps low-level moisture against hinges, weld points, and operator boards for weeks at a time. Ferrous hardware rusts faster than it would in a drier climate, and wood gates absorb enough moisture to swell and bind. This is why we specify galvanized or stainless fixings on Selma gate work and check boards for moisture-related contact corrosion during winter calls.
The hinge post has likely failed below grade. On Selma’s post-WWII and 1970s-80s lots, the original steel post has been soaking in Valley irrigation water and fog moisture for decades, and the concrete footing has started to soften or crack. The gate panel hasn’t changed – its support has. We re-pour the footing, reset the post, and align the hinges so the gate hangs level and the opener isn’t dragging dead weight.
Most operators can be repaired after a dust jam. We flush the gearbox and track, inspect the worm drive and bearings for abrasive scoring, and replace only what’s worn. If the motor windings or gear teeth have been ground past spec, replacement is the honest call – and we’ll show you the damaged parts so the decision is clear. A typical dust-related repair in Selma runs $180-$340; full replacement starts around $420.
Check the roller track for gritty buildup, listen for grinding when the gate opens, and watch for any sag or wobble at the hinge post. If you can see dust caked in the track or the gate hesitates mid-cycle, that’s the window to act – before the dust load peaks. We book preventive maintenance visits in late August for exactly this reason, and those runs cost less than the repair that’s waiting in October. Call (626) 649-4572 any time.
Call Latch & Post for Electric Gate Repair in Selma
When the gate stops opening, you need a straight answer and a fair price, not a sales pitch. That’s how we work in Selma – from a heavy tube-steel farm gate off Floral Avenue to a mid-century swing gate near downtown. Pick up the phone and call (626) 649-4572. You’ll talk to a live person. We’ll schedule the visit, give you a free estimate, and put the number in writing before anything starts. Your floors stay clean, your price stays fixed, and the gate works like it should.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Selma and the Central Valley since 2009.