Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Selma
Gate installation in Selma usually runs $1,800 to $6,500 depending on the gate type, materials, and whether you’re adding automation. We quote that number in writing before any work begins. If you live off Evans Road or near the Schertz Parkway corridor, you already know the tule fog and raisin harvest dust don’t treat outdoor steel kindly, and that’s exactly why the hardware we specify here matters so much. Call (626) 649-4572 and a live person will answer, any hour of any day.
We’re Latch & Post Gate Repair, part of the Cedarwell family since 2009, and we work exclusively on gates. Not fences. Not general contracting. That focus means the technician who shows up for your Gate Repair in Selma has already seen your exact failure mode dozens of times before.
Why Latch & Post Gate Repair Is Selma’s Preferred Gate Installation Company
Most Selma homeowners we meet have never had a gate company do what we consider basic. A written price before the first bolt comes out. Shoe covers and drop cloths so your floors stay clean when we walk through to run power to an operator. A photo of the cleanup before we leave. Those aren’t add-ons here; they’re part of every visit, and they’re why our Gate Installation team gets called back when the neighbor needs work.
Our local reputation in Selma is built on specifics. We know that a slide gate on a west-facing post off Cibolo Creek will cook an operator board by August if there’s no shade. We know that a swing gate bordering a vineyard parcel needs stainless hinge bolts, not zinc-plated ones. We coordinate dispatch from our San Antonio office, so a Selma call gets a Selma-trained crew without a long wait. And if something isn’t right, the 365-Day Done Right Promise means we make it right. No argument, no fine print.
The person who answers your call is a live human, 24/7, not a voicemail tree. When your gate is stuck open at 11 p.m. and the dog is eyeing Schertz Parkway, that matters.
Gate Installation Services in Selma
Gate Installation Services in Selma means building for a specific set of local conditions: post-WWII ranch homes and 70s/80s tract houses on large lots, older block-wall or chain-link perimeters, and a climate that alternates between weeks of ground-level tule fog moisture and months of 105°F-plus heat. A standard residential driveway swing gate with steel frame and powder-coat finish typically runs $2,200 to $4,800 in Selma, including posts, hinges, and installation. Pedestrian gates run $900 to $2,400 installed.
Raisin harvest dust changes the math here. From mid-August through September, fine particulate from the vineyards that surround Selma city limits coats everything outdoors. That grit finds its way into roller tracks and hinge barrels, and a gate that was installed without sealed bearings will wear itself down within a single season. We spec sealed-bearing hinges and brush-style track seals on Selma installs because we’ve seen what happens without them.
Driveway and Double Gate Installation
Most Selma driveways we measure are wider than newer subdivisions, which means a lot of double gates. Two panels, each hinged to its own post. When we install a double gate, we set both posts in concrete footings below the frost line and align the panels before the concrete cures, because even a quarter-inch post shift turns into a dragging gate by October. Prices for a double steel driveway gate typically run $4,200 to $6,500.
Sliding and Security Gate Installation
Sliding gates make sense on Selma lots where a swing arc would block the driveway or hit a fence at an angle. The track is the vulnerable part here. Harvest grit packs into open tracks and chews up the rollers. We recommend a cantilever slide gate for Selma properties bordering active farmland: no ground track means no grit-filled roller channel, and the gate clears grass, mud, and debris without binding. Security gates with welded steel infill and a keypad or intercom run $3,800 to $6,200 on typical Selma lots.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Selma
Electric Gate Installation in Selma adds a control board, motor, safety sensors, and usually a keypad, intercom, or remote system to your gate. The installed cost for a single swing gate with a quality operator like Linear or Ghost Controls typically runs $3,500 to $6,000 in Selma. That includes the power run, the operator, safety edges, and programming.
Two local conditions drive operator failures here more than anything else. First, west-facing posts without shade push control boards past their thermal limits during summer afternoons that routinely exceed 105°F. Second, tule fog from November through February keeps moisture against exposed terminals and accelerates corrosion. We mount operators in sealed or shaded enclosures where possible and use dielectric grease on every connection.
Operator and Control Board Selection
Selma’s temperature swings mean the cheap online operator won’t last. We stock and install brands we’re factory-trained on: LiftMaster, Linear, Ghost Controls, DoorKing, FAAC, BFT, Viking, Elite, and Mighty Mule. For a Selma gate that borders a vineyard or packing shed, we lean toward DoorKing and FAAC units with sealed enclosures and solar shielding. The board is the first thing to fail out here, so we’d rather spend your budget on a board that survives August.
Safety Sensors and Entrapment Protection
Every automatic gate we install in Selma includes photo-eye sensors and, on slide gates, a reversing edge that stops the gate if it touches anything. Texas law and federal UL 325 standards require entrapment protection, and we test every sensor before we call the job done. If you have kids or dogs, the sensors are not an upgrade; they’re the whole reason the gate is safe to automate.
Trusted Brands We Service in Selma
We carry parts for the brands Selma homeowners actually have on their property. Linear and Ghost Controls operators are common on ranch-style homes here, and DoorKing units show up on agricultural parcels and light commercial gates along the vineyard edges. Because we stock local parts for Selma customers and our techs are factory-trained on these systems, a board swap or motor replacement usually happens on the first visit. You won’t wait a week for a part to ship from a warehouse in Ohio. We also service Viking, FAAC, BFT, LiftMaster, Elite, and Mighty Mule, so if your existing operator matches one of those, we can work on it without selling you a full replacement you don’t need.
Common Gate Installation Problems We See in Selma Homes
- Tule fog corrosion below grade. The hinge post is the first thing to go. Moisture from November through February sits at ground level for weeks, and steel posts rust through right where they enter the concrete. We saw this on a ranch-style lot off Thompson Avenue: the hinge post had rotted through below the surface, and the gate had sagged a full three inches. New post footing, stainless hinge bolts, and the gate cleared its arc again.
- Harvest dust grinding roller tracks. From mid-August through September, raisin harvest dust blankets every outdoor surface in Selma. That fine grit packs into slide gate tracks and roller bearings, and motors work harder until they burn out. A brush-style track seal, which we add on Selma slide gate installs, keeps most of that grit out from day one.
- West-facing operator boards cooking in summer heat. A control board mounted on a west-facing post, no shade, sealed in a dark metal box: that board hits 140°F inside by 3 p.m. in August. We mount operators in vented, shaded enclosures or relocate the board to the shaded side of the post. It costs a little more up front and saves a $400 board replacement every other summer.
- Sagging panels that bind after fog season. Wood and PVC panels soak up tule fog moisture, swell, then warp when the heat returns. That lateral stress loads the hinge post unevenly, and pretty soon the latch doesn’t line up. We see original steel gates from the 70s and 80s on Selma ranch homes with exactly this problem. Sometimes a new post is enough; sometimes the panel is too far gone and a full Gate Installation in Selma is the honest call.
Pricing for Gate Installation in Selma, TX
Here are the numbers we quote to Selma homeowners every week. A pedestrian gate installed: $900 to $2,400. A single steel driveway swing gate: $2,200 to $4,800. A double gate: $4,200 to $6,500. A sliding or cantilever gate: $3,800 to $6,200. An automatic gate with operator, safety sensors, and keypad: $3,500 to $6,000. These ranges assume standard steel construction with powder-coat finish. Custom wood, ornamental iron, or gates bordering active farmland with thicker posts and sealed hardware will run toward the top of each range. Every quote is written down and handed to you before we start. If the price changes, we tell you why before we order anything. Free estimates. Call (626) 649-4572.
We Also Serve Cities Near Selma
Latch & Post Gate Repair serves the broader South Texas region from our San Antonio metro coordination. If you have a rental or a family member in the area, we handle Selma and the surrounding cities: San Antonio, Houston, Dallas, and Fort Worth. Same written-pricing promise, same 365-Day Done Right Promise, same live person on the phone at 3 a.m.
Serving Selma, TX - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Selma
Selma’s tule fog season, which runs roughly November through February, keeps ground-level moisture on metal hardware for weeks at a time, and that corrosion cycle is worse than what drier towns a few miles south experience. Then August and September arrive with raisin harvest dust from the surrounding vineyards, and that abrasive grit works its way into motors and roller tracks. The combination of corrosion followed by grit is what kills openers here faster than in, say, New Braunfels or Cibolo. A late-summer service visit, before harvest dust peaks, prevents most of it. Call (626) 649-4572 to schedule one.
Powder-coated steel with sealed-bearing hinges and stainless hardware. That’s the short answer. Galvanized steel posts set deep in concrete will survive the fog season, and a powder-coat finish resists the scratching that raw harvest dust accelerates. Avoid hollow aluminum on vineyard-bordering lots if the gate will see farm truck traffic; it dents and flexes in ways that throw off the latch alignment. We’ve installed cantilever slide gates on agricultural parcels off Highway 78 where ground tracks would clog with mud and grape skins within a month.
Usually the post, especially on Selma homes built in the 70s and 80s where the original steel hinge posts have been in damp soil for forty years. Tule fog moisture rusts the post through at ground level, and the gate leans. Sometimes the panel itself has warped from moisture-then-heat cycles. We’ll tell you which it is on the first visit, quote the fix in writing, and if it’s just a post reset, you’ll pay a lot less than a full replacement. Call (626) 649-4572 for an assessment.
At minimum, a pair of non-contact photo-eye sensors across the gate’s path and either a reversing edge or an obstruction-sensing motor. That combination stops the gate if a child, pet, or car is in the way. UL 325 requires it, and every automatic gate we install in Selma includes both, tested before we leave. If your existing gate has only a keypad and a remote with no sensors, it’s out of compliance and worth a correction visit.
Late July to early August, before raisin harvest dust peaks, is the most important service window for Selma gates. A second check in late October catches any hardware damage from the summer heat before the fog season adds moisture to the mix. One service visit a year, done in August, will extend the life of a gate opener by several seasons here. We offer both visits, and the written quote covers exactly what we’ll inspect and replace. Call (626) 649-4572 to book.
Contact Latch & Post Gate Repair in Selma
If you’re in Selma and the gate is dragging, stuck, or just forty years old and tired, call (626) 649-4572 for a free estimate. A live person answers, day or night. We’ll schedule a visit, measure the site, put a written price in your hand, and if you say go, our crew shows up in uniform with shoe covers, drop cloths, and quiet tools if naptime is a concern. We clean up, photograph the finished work, and leave your floors as clean as we found them. That’s the Cedarwell C.A.R.E. Promise, and it’s how we’ve done it since 2009.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Selma and the surrounding South Texas region.