Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Mesquite
Electric gate repair in Mesquite usually costs between $240 and $680 for most opener, keypad, and sensor fixes, and we can dispatch a technician to your home this week. Most jobs are diagnosed and repaired the same day we arrive. If your gate stopped opening, is reversing on its own, or the keypad stopped accepting your code, call us at (626) 649-4572 and you’ll speak with a live person, not a voicemail.
We know Mesquite’s gates better than most because we work here every week. The older ranch homes on the east side, the nicer subdivisions off Pioneer Boulevard, and the gated communities near the Virgin River all have different gate problems. Local knowledge matters when a post has heaved from clay movement and a new opener alone won’t fix it. Electric Gate Repair in Mesquite is what we do, and we do it with a written price before any work begins.
Why Latch & Post Gate Repair Is Mesquite’s Preferred Electric Gate Repair Company
We’re part of the Cedarwell family of gate specialists, and we’ve been repairing gates since 2009. Latch & Post focuses on one trade: gates. Not handyman work, not general contracting. That focus matters when a 1990s LiftMaster operator is fighting a post that shifted during the February 2021 freeze-thaw cycle. Our technicians see that exact failure every week in Mesquite.
Every call to (626) 649-4572 is answered by a live person, 24 hours a day. You won’t get a callback queue or an answering service that promises someone will get back to you. Our technicians are background-checked, uniformed, and factory-trained on FAAC, BFT, Linear, and Viking equipment, the brands Mesquite homeowners actually have. When we step inside your gate area, we put down drop cloths and wear shoe covers. Before we leave, we take a photo of the cleanup so you can see exactly what we did. And every repair is backed by our 365-Day Done Right Promise: if it’s not right, we make it right, no argument.
Families in Mesquite call us because they want a straight answer on price. We write the price down before any work starts, every single visit. No pressure. No surprise invoice at the end. Cody Beckman leads our Mesquite team, and he holds our technicians to the Cedarwell C.A.R.E. values: Clean up like it’s our own home, Ask before we move or touch anything, Respect your time and quiet hours, and Explain the price before the work.
Commercial Gate Operator in Mesquite
A commercial gate operator in Mesquite is the motorized unit that opens and closes a driveway or parking-lot gate, and it gets worked harder here than most people realize. Mesquite’s summer heat regularly crosses 105°F, and combined with the Blackland Prairie clay shifting the gate’s weight off-center, operators burn through capacitors and control boards faster than they would in a milder climate. Most commercial gate operator repairs in Mesquite run between $380 and $900 depending on whether we’re replacing a limit switch, a capacitor, a control board, or the entire operator head. You’ll see the exact number in writing before we touch anything.
Operator Replacement on Older Mesquite Gates
When your commercial operator is 15 to 20 years old and the control board has failed for the second or third time, replacement often costs less than continuing to patch it. A new FAAC or BFT slide-gate operator installed in Mesquite typically runs $1,600 to $3,100 including the master arm, receiver, and programming. If you’re also considering a new gate, our Gate Installation - Mesquite team can coordinate both projects. We’ll quote both options and give you our honest recommendation before any work starts.
Slide Gate Motor Diagnosis
If your slide gate in Mesquite is shuddering or stopping mid-travel, the problem is rarely just the motor. We inspect the post, the rack, and the chain alignment before replacing any electrical component, because a motor burning out is usually a symptom of the gate fighting a shifted post. Repairing the motor alone without fixing the alignment means you’ll be calling us again in six months.
Gate Opener Repair in Mesquite
Gate opener repair in Mesquite covers the motor and drive mechanism that automates your swing or slide gate. If your gate beeps but doesn’t move, moves a few inches and stops, or runs but won’t fully close, the opener is usually the culprit. Most residential gate opener repairs in Mesquite run between $240 and $520, with complete residential opener replacement averaging $900 to $1,800 including labor. We write the price down before we begin, and you approve it before we turn a single screw.
Obstruction Faults and Safety Sensor Issues
Mesquite’s expansive clay creates a specific opener problem we rarely see in newer suburbs. When a post tilts even half an inch, the gate’s weight shifts and the safety photocell reads the misalignment as an obstruction, so the opener refuses to move or reverses constantly. A technician who only checks the opener will miss it. We check the post first, then the photocells, then the opener, because that’s the order the evidence points to in Mesquite. If you have a BFT or Linear opener throwing obstruction codes, call (626) 649-4572 and we’ll walk you through what to check before we even schedule the visit.
Keypad and Remote Control Repair
When a Mesquite homeowner’s remote works but the keypad doesn’t, the failure typically isn’t the keypad itself. UV exposure here is brutal on the keypad’s membrane buttons, and dust from the desert gets under the faceplate and shorts the contacts. We replace keypad assemblies and reprogram remote controls the same visit, usually for $120 to $240. If your kids lost a remote and you need a new one paired to a Viking or FAAC receiver, that’s a fast fix we can handle in under an hour.
Trusted Brands We Service in Mesquite
Our technicians are factory-trained on the brands Mesquite homes actually use, including FAAC, BFT, Linear, and Viking. That matters because a BFT control board doesn’t troubleshoot the way a Linear board does, and a FAAC hydraulic operator has different failure modes than a Viking mechanical unit. We keep common boards, capacitors, limit switches, and remotes stocked for fast turnaround in Mesquite, so if your FAAC slide gate fails, we’re not waiting a week on a part from a distributor.
We also service LiftMaster operators, which are the most common unit on 1990s and 2000s Mesquite driveway gates. Many of those original boards are now obsolete. We can often retrofit a universal control board that preserves your existing remotes and keypad, saving you the cost of a full operator swap.
Common Electric Gate Repair Problems We See in Mesquite Homes
- Clay-heaved hinge posts: Mesquite sits on Blackland Prairie clay that swells in wet winters and contracts in droughts. A gate post set in shallow concrete can visibly tilt within one wet season, causing the gate to sag and the opener to fight the weight until it fails.
- Misaligned safety photocells: When a post racks outward during a drought, the photocells on either side of the gate no longer line up. The opener reads that as an obstruction and refuses to close, which homeowners mistake for a control board problem.
- Obsolete control boards on 1990s operators: Mesquite has thousands of homes built between the late 1950s and early 1980s, many with gate operators installed in the 1990s during a security-upgrade wave. Those boards are now 25 to 30 years old, and many are no longer manufactured. We retrofit universal boards or recommend replacement when repair is throwing good money after bad.
- Worn rack and pinion on slide gates: On east-side Mesquite properties, DIY-installed slide gates often sit on posts set only 18 to 24 inches deep. The clay shifts the rack out of mesh with the pinion gear, producing a grinding noise and eventually stripping the gear teeth entirely.
Pricing for Electric Gate Repair in Mesquite, NV
A typical residential electric gate repair in Mesquite runs between $240 and $680, and a full opener replacement usually lands between $900 and $1,800 installed. Commercial operator work runs higher, typically $380 to $900 for component repairs and $1,600 to $3,100 for a complete operator swap with a FAAC or BFT unit. Keypad replacements run $120 to $240, and remote programming is usually under $100 when you already have the remote. What moves the number is whether we’re replacing a capacitor or a full control board, how far into the driveway the operator sits, and whether the post has to be reset before any electrical work can hold. You’ll get a written price before anything starts, and our 365-Day Done Right Promise stays with the work after we leave.
We Also Serve Cities Near Mesquite
We work throughout the Las Vegas Valley, including North Las Vegas, Boulder City, Las Vegas, and Henderson. Our Las Vegas office handles dispatch and scheduling for the whole region, and crews serve Mesquite locally. If you’re in a neighboring city and the gate won’t open, call (626) 649-4572 and we’ll get you scheduled. Learn more about our broader service area through our Electric Gate Repair hub page.
Serving Mesquite, NV - Our Local Coverage Area
We’re based in the Mesquite area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Mesquite
Half the time it’s the post. On Mesquite’s Blackland Prairie clay, a hinge post can heave within one wet winter, which shifts the gate’s weight and makes the operator think it’s hit an obstruction, so it stops mid-travel. We check the post footing first because fixing the operator alone won’t last if the post is moving. Call (626) 649-4572 and we’ll diagnose it properly, with a written quote before any work begins.
It depends on the board and the wood. Many 1990s LiftMaster control boards are obsolete, but we can often retrofit a universal board and preserve your existing remotes and sensors. The bigger question is the gate itself. If the 40-year-old cedar or iron has rotted through at the post or the hinges are pulling out, a full replacement with a modern operator is usually the cheaper long-term answer. We’ll give you both quotes in writing so you can decide with real numbers.
Mesquite’s east-side homes were mostly built when DIY gate posts were set 18 to 24 inches deep in thin concrete, and the soil underneath is some of the most expansive clay in the country. Wet winters swell the clay, droughts contract it, and the post works loose season after season. Newer suburbs built on engineered fill don’t have this problem at the same scale, which is why Mesquite requires a post-first diagnostic that generic gate companies often skip. We reset posts with deep-poured concrete footings so the repair actually holds.
Yes, every automatic gate in Mesquite should have functioning safety photocells, also called photo eyes or safety edges, to prevent the gate from closing on a person or pet. You can test them by pressing your remote to close the gate and breaking the beam with your hand; if the gate doesn’t reverse immediately, the photocell is misaligned, dirty, or failed. Mesquite’s dust and heat cause sensor failures more often than people expect. We replace and realign photocells the same day, usually for $120 to $240 per pair, and we check every one we install.
We service and repair FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule gate operators. Most Mesquite homes we visit have either a LiftMaster from the 1990s, or a newer FAAC or BFT unit. We carry common parts for all of these brands so we’re not waiting on a distributor when your gate is stuck open. If your brand isn’t listed, call (626) 649-4572 and we’ll tell you honestly whether we can help.
If your electric gate in Mesquite won’t open, won’t close, or is making a sound it didn’t make last month, call us at (626) 649-4572. You’ll speak with a live person, who’ll ask you the right questions and give you a clear idea of what we’re walking into, before we even schedule the visit. Written price first. Shoe covers on. Cleanup photo before we leave. That’s how we work, and that’s how it should be.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Mesquite as part of the Cedarwell family of gate specialists since 2009.