Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Mesquite
Gate installation in Mesquite means dealing with clay soil that moves more than most people realize. Our crews work the older east-side neighborhoods, the 1970s ranches off East Davis Street, and the newer lots near Falcon Ridge, so we know what happens when Blackland Prairie clay pushes against a shallow post footing. The honest answer: a gate that’s 40 years old and hung before modern safety rules rarely makes sense to repair again. Call (626) 649-4572 and we’ll give you a straight read on whether to retrofit or replace, with the price in writing before anything gets touched.
Why Latch & Post Gate Repair Is Mesquite’s Preferred Gate Installation Company
We focus on gates the way Mesquite homeowners need them focused on: the latch, the post, and the operator that moves the whole thing. Our technicians are background-checked and uniformed, and they follow the Cedarwell C.A.R.E. values on every visit. Clean up like it’s our own home. Ask before we move or touch anything. Respect your time and quiet hours. Explain the price before the work starts, in writing, every single time. That’s not a slogan; it’s the routine.
When we work inside a Mesquite house to run wires or mount a keypad, we put on shoe covers and lay drop cloths on the floor before we step inside. Your floors stay clean, and we send a photo of the cleanup before we leave. Families with kids and pets notice that. We also answer the phone with a live person around the clock, nights, weekends, and holidays, so when your gate stops working on a Friday evening, you’re not sitting in a callback queue.
Our Gate Installation team is factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Mesquite because so many of the operators we pull off old gates are obsolete, and knowing what can be retrofitted versus what needs a full swap is exactly the kind of call you want made by someone who’s seen these units for years, not someone reading a spec sheet for the first time.
Every job we complete is backed by the 365-Day Done Right Promise. If it isn’t right, we make it right, no argument, no fine print.
Electric Gate Installation in Mesquite
Electric Gate Installation in Mesquite usually starts with the same discovery: the old operator’s control board is dead and nobody makes a drop-in replacement anymore. When that happens, you’ve got two choices. You can hunt for a retrofit board that may or may not talk to your existing motor, or you can install a new operator that meets current UL 325 entrapment protection standards. On a gate that’s already 25 to 40 years old, the math almost always points to replacement.
A typical electric gate installation here runs $1,800 to $4,200 depending on whether we’re reusing sound posts or resetting them. If the posts are set only 18 to 24 inches deep in cracked concrete, as we regularly find in Mesquite’s older subdivisions, reusing them means the new operator will be fighting a gate that racks out of alignment within a season. We’ll tell you that before we quote anything.
Replacing Obsolete Operators
Old LiftMaster, FAAC, and Linear control boards fail in predictable ways: dead relays, burning out on surge, or simply no parts available. We stock and order current parts for Mesquite jobs, so a replacement operator doesn’t have to wait for a part to ship across the country. Most swaps are done in a half day once the equipment’s in hand.
Adding Safety Photocells and Edge Sensors
Any new electric gate installation we do includes safety photocells and edge sensors to meet UL 325. If your existing gate predates 2016 and is running without them, we’ll explain exactly what that means and what it costs to bring it current. We choose pet-safe routing for cables so your dog’s favorite digging spot isn’t a hazard.
Driveway Gate Installation in Mesquite
Driveway Gate Installation in Mesquite is rarely just hanging a gate. It’s a post-and-clay problem first. The Blackland Prairie soil under most lots swells through wet winters and contracts during the long dry spells, and any post set shallow moves with it. If we reuse a post footing that’s moving, your new driveway gate will sag in months. So a full installation here starts with a post evaluation, not a sales pitch.
A new single-swing driveway gate with an operator typically runs $3,200 to $6,500 in Mesquite, including deep-poured concrete footings, hinge hardware, and a modern operator with a keypad and remotes. A double-swing or sliding gate runs higher, usually $5,000 to $9,000 depending on gate size, the operator brand, and whether we have to pull new power to the post. You’ll see the exact number in writing before we touch anything.
New Swing Gates on Sound Footings
When the old posts are cracked but the clay underneath is still stable, we dig them out, pour a footing that reaches below the active soil line, and hang a new swing gate that won’t heave with the next rain cycle. In the east-side neighborhoods around East Davis Street and Pioneer Road, this is the difference between a gate that works for fifteen years and one that needs a hinge adjustment every spring.
Sliding and Double Gates for Wider Drives
Wider driveways on Mesquite’s ranch-style lots often work better with a sliding gate or a double swing. We measure the gate travel, check the slope, and make sure the concrete track or the cantilever rollers will hold up to the clay movement before we order materials. A written price covers the whole job, including cleanup and the operator programming.
Trusted Brands We Service in Mesquite
We install and service operators from LiftMaster, Linear, Viking, and Ghost Controls, among others. For Mesquite customers, we keep common controller boards, photocells, and remotes for these brands on hand or on fast order, which cuts the wait when a storm pops a board. If you’ve got an old DoorKing or FAAC unit that’s been in the ground since the 1990s, we’ll tell you honestly whether a retrofit board makes sense or whether you’re better off replacing the operator now rather than chasing parts every year.
Common Gate Installation Problems We See in Mesquite Homes
- Shallow posts set 18-24 inches deep in cracked concrete. Blackland Prairie clay moves enough that a hinge post set this shallow heaves within a season or two. We see it most often in the 1960s-to-1980s ranch tracts where DIY installs were common, and the fix is a deep-poured footing, not another hinge adjustment.
- Obsolete operator control boards with no drop-in replacement. Old LiftMaster, FAAC, and Linear boards from the 1990s and early 2000s are failing, and the supply of exact replacements is gone. We’ll identify the board on the first visit and lay out a retrofit or full-swap price before anything gets ordered.
- Legacy gates hung before modern UL 325 entrapment protection. A gate that runs with no working photocell or edge sensor is dangerous and also a liability. On a 40-to-60-year-old gate, retrofitting the safety gear while keeping the old frame often costs more than a new installation, and we’ll show you that math in writing.
- Sagging ornamental-iron gates that keep returning after hinge adjustments. If the post is moving, the hinges can’t hold the gate square. We reset the post once, hang the gate on new hinges, and it stays put. This is the single most common call we take from Mesquite’s east side.
Pricing for Gate Installation in Mesquite, NV
You should know the numbers before you call, so here they are. A pedestrian gate replacement in Mesquite runs $450 to $1,200 for a basic steel or ornamental-iron gate hung on existing sound posts. A new single driveway swing gate with a remote operator typically lands between $3,200 and $6,500. A double-swing or sliding driveway gate with a modern operator and new footings runs $5,000 to $9,000. Electric gate work, including operator replacement and safety photocells, usually falls between $1,800 and $4,200. The biggest cost driver is the post work: if we’re digging out shallow footings and pouring deep concrete in clay, that adds labor but it’s the part that makes the gate last. Every estimate is written, free, and agreed before we start.
We Also Serve Cities Near Mesquite
If you’re in North Las Vegas, Boulder City, Las Vegas, or Henderson, we cover those areas too. Latch & Post Gate Repair dispatches from our Las Vegas office, and crews serve Mesquite locally. Call (626) 649-4572 and a live person will answer.
Serving Mesquite, NV - Our Local Coverage Area
We’re based in the Mesquite area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Mesquite
Because the hinge post is moving, not the hinges. In Mesquite’s east-side neighborhoods, we routinely find gate posts set only 18 to 24 inches deep in cracked concrete. The Blackland Prairie clay swells during wet winters and contracts in dry spells, tilting the post a little more each cycle. A hinge adjustment straightens the gate for a few months, then the post shifts again. The permanent fix is to reset the post on a deep-poured footing below the active clay line. We’ll show you the post condition before quoting anything. Call (626) 649-4572 for a free estimate.
Sometimes, but usually not. Boards for 1990s-era LiftMaster, FAAC, and Linear units are discontinued, and we often can’t source an exact replacement. A retrofit board may work if the motor and gearbox are sound, but if the operator is 25 to 40 years old and the board is one of several failing parts, a full operator swap is the cheaper answer over the next five years. We’ll test the unit and lay out both options in writing before any work starts.
Yes. Gates installed before UL 325 entrapment protection became standard often have no working photocell or edge sensor. An operating gate without them is dangerous, especially with kids or pets in the yard. If the gate is otherwise sound, we can add photocells and an edge sensor. If the gate is also sagging on bad posts, we’ll recommend replacement and include all safety equipment in the new installation. Estimates are free, and the price is written before we begin.
In many cases, yes. A manual gate with solid hinges and posts set deep can take a solar operator like Ghost Controls or LiftMaster, which avoids running new power out to the post. If the post is shallow and moving, we’ll reset it first because a solar operator on a sagging gate will bind and wear out fast. We’ll assess the gate, the sun exposure, and the post depth, then give you a written price for the whole conversion.
A full installation means removing the old gate and posts, digging out any shallow concrete, pouring new footings that go below the clay’s active movement zone, hanging the new gate, and installing the operator, keypad, remotes, and safety photocells. Reusing old posts only works if the footing is deep, uncracked, and the post itself hasn’t rotted or rusted through. In Mesquite’s older ranch tracts, we find shallow, cracked posts more often than not, so we recommend full replacement most of the time. Call (626) 649-4572 and we’ll evaluate your site for free.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Mesquite since 2009.