Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Highland Park
Electric gate repair in Highland Park usually runs between $180 and $340 for common fixes like a bad safety sensor, a worn limit switch, or a keypad that’s lost its programming. Most jobs are done in a single visit, and you’ll always see the exact price in writing before we touch a screw. Our technicians know the older estate streets here well, from St. Johns Drive to Lakeside, and we keep enough parts on the truck to handle most legacy operators on the first call. Call (626) 649-4572 for a free estimate.
Highland Park is a particular kind of town for gate work. The housing stock was largely built between the 1920s and 1960s, which means most of the driveway gates predate interchangeable parts. A technician has to know how to field-fit something, not just swap a catalog component. That’s the work we do.
Why Latch & Post Gate Repair Is Highland Park’s Preferred Electric Gate Repair Company
Since 2009, Latch & Post Gate Repair has been part of the Cedarwell family of independently owned and operated gate specialists, and we’ve spent those years narrowing our focus to one thing: gates. Latch and post. That’s the discipline. Every gate comes down to two parts, the latch that holds it and the post that carries it, and when one of those is off, the automation strains against it.
Highland Park homeowners keep calling us back for a few reasons. The written price before any work begins is one. The shoe covers and drop cloths are another, because nobody wants a technician tracking clay soil across a limestone foyer. The 365-Day Done Right Promise helps too: if the repair isn’t right, Latch & Post makes it right, no argument and no fine print. Our technicians are background-checked, uniformed, and factory-trained on the brands families actually own here: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
One more thing worth knowing. When you call Latch & Post, a live person answers. Every hour. Nights, weekends, holidays. No voicemail, no callback queue.
Automatic Gate Repair in Highland Park
Automatic gate repair in Highland Park most often comes down to an operator that’s working harder than it should because something mechanical has shifted underneath it. The city’s older homes sit on ‘Dallas black’ Vertisol clay, which heaves several inches between wet winters and dry summers. That movement racks gate posts out of plumb on a near-annual cycle, so a swing gate that binds every spring is usually a foundation problem rather than an operator problem. A typical repair call here runs $180 to $340 for sensor, limit switch, or keypad work, while a post-footing reset is a larger conversation we’ll scope and write up honestly.
Fixing the Gate Before the Motor Quits
When a Highland Park gate drags or reverses mid-cycle, the operator is usually fighting a hinge that no longer lines up. We start by checking the post with a level, not by blaming the motor. If the post has moved, we’ll explain what a footing reset involves and what it costs before we do anything.
Matching Older Ironwork When Parts Aren’t Made Anymore
A lot of the ornamental gates along Armstrong Parkway and Preston Road were fabricated by hand, which means replacement hinges and latch hardware don’t exist in a catalog. We order custom-fabricated pieces to match the scrollwork profile. It takes a few more days, but the repair looks like it belongs to the house instead of looking like an afterthought.
Electric Gate Motor in Highland Park
Electric gate motor replacement in Highland Park is generally the right call when a legacy unit no longer supports modern safety requirements, particularly the UL 325 entrapment standard. Older LiftMaster and FAAC boards sometimes can’t accept current safety photocells or loop detectors, which leaves a gate without the required protection. A new motor and control board for a typical Highland Park swing or slide gate runs $850 to $2,200 depending on gate weight and operator type, and we’ll show you the breakdown in writing before any work starts.
When a New Motor Is Cheaper Than Repeated Repairs
We’ll tell you plainly when patching an old operator stops making sense. If the control board is obsolete and the motor windings are tired, replacing the operator is usually less expensive over three years than chasing service calls. You get fresh safety photocells, a current board, and a warranty that means something.
What Gets Protected Inside the House
Gate motor work means running low-voltage cable near landscaping and sometimes through foundation walls. We lay drop cloths on the floor and put on shoe covers before we step through the door. If you have kids napping or a dog who doesn’t like strangers, tell us on the phone and we’ll work around the schedule and keep the noise down.
Trusted Brands We Service in Highland Park
We’re factory-trained on the operators Highland Park homes actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common control boards, safety photocells, and keypad parts stocked for these brands so most repairs don’t wait on a shipment. If you have a brand that isn’t on that list, we’ll tell you honestly whether we can source parts or whether you’d be better served elsewhere.
Common Electric Gate Repair Problems We See in Highland Park Homes
- Posts racked out of plumb by the clay. Seasonal heave moves hinge posts two to four inches laterally over decades, binding swing gates every spring. Realigning the gate panel helps temporarily, but the fix that lasts is excavating the footing and re-pouring it.
- Obsolete control boards on legacy operators. Older LiftMaster, FAAC, and BFT units often can’t accept modern safety photocells or loop detectors, leaving gates without required entrapment protection. Retrofit is sometimes possible; replacement is sometimes the only honest answer.
- Ice-storm damage from DFW’s winter events. Cracked weld joints on decorative scrollwork, seized pivot hinges on gates left partially open, and keypads with frozen electronics. We keep keypad replacement parts in the truck for the most common local operators.
- Worn latch hardware on custom ironwork. Hand-forged latches from the 1930s don’t cross-reference to any modern part number. We source custom-fabricated replacements that match the original profile and finish.
Pricing for Electric Gate Repair in Highland Park, TX
Here’s the honest money picture. A standard sensor replacement runs $120 to $190. A keypad replacement is $180 to $260. A limit switch or board repair typically falls between $220 and $380. A full operator replacement with new motor and control board starts around $850 and goes to $2,200 depending on gate weight. A post-footing excavation and re-pour on the older streets is $600 to $1,400 per post, and that’s the job that keeps a gate swinging true for years. Every quote is written, line by line, before we begin. Call (626) 649-4572 and we’ll put a number on paper.
We Also Serve Cities Near Highland Park
While our Electric Gate Repair specialists spend most days on Highland Park’s estate streets, we also serve homeowners in Dallas, Fort Worth, San Antonio, and Houston through our neighboring Cedarwell-family locations. The same written-price promise and 365-Day Done Right Promise apply on every job. If you’re in Highland Park or a nearby community and your gate isn’t working right, one call gets a live person.
Serving Highland Park, TX - Our Local Coverage Area
We’re based in the Highland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Highland Park
The problem is almost always the post, not the gate panel. Highland Park sits on expansive ‘Dallas black’ Vertisol clay that swells after winter rain and shrinks in summer drought. That movement shifts hinge posts two to four inches laterally over decades, so a gate realignment without a footing reset will fail again within a season or two. The fix that lasts is excavating the post, re-pouring the footing, and then re-hanging the gate. Call (626) 649-4572 and we’ll put the scope in writing.
It depends on the control board. Some legacy boards accept retrofit safety photocells, and some don’t. If the board doesn’t support current UL 325 entrapment protection, you have two honest options: replace the board and add the sensors, or replace the operator entirely. We’ll show you what each costs and recommend the option that makes sense for your gate’s age and condition. Most homeowners find that replacing the operator is cheaper over three years than patching an obsolete one.
Yes, we can match it. We order custom-fabricated hinge hardware, latch components, and scrollwork pieces from the same pattern as your original ironwork. The repair won’t look like a stock part was bolted on. It takes a little longer than an off-the-shelf fix, but on Highland Park’s Tudor Revival and Mediterranean estates, matching the original fabrication matters more than saving three days.
In most cases, it’s the keypad itself. Water infiltrates the faceplate, freezes, and shorts the electronics. We test the keypad’s output at the operator to confirm where the signal is dying. If it’s the keypad, replacement runs $180 to $260 and we keep common local models on the truck. If the operator isn’t receiving the signal, that points to a board issue, which is a separate diagnostic we’ll quote in writing.
A gate needs repair when the structure is sound and the failure is mechanical or electronic: a worn hinge, a bad sensor, a tired capacitor. A gate needs replacement when the post footings have failed repeatedly, the ironwork is rusted through in multiple places, or the operator is obsolete and the cost to bring it current exceeds 60 to 70 percent of a new system. We’ll tell you plainly which one you’re facing, with numbers on paper either way.
Call Latch & Post for Electric Gate Repair in Highland Park
If your gate is binding, dragging, or refusing to open, call (626) 649-4572. A live person answers, day or night. We’ll schedule a technician who shows up in uniform, lays down drop cloths, puts on shoe covers, and hands you a written price before any work begins. And if it’s not done right, the 365-Day Done Right Promise means Latch & Post makes it right. That’s the whole deal, and it’s been the deal since 2009.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Highland Park since the company’s founding in 2009.