Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Brisbane, CA
Gate work in Brisbane is different from anywhere else on the Peninsula. The homes climb the eastern slopes of San Bruno Mountain, the fog off San Francisco Bay keeps metal damp with salt most mornings, and many driveway gates date back to the 1950s and 60s. We’re Latch & Post Gate Repair, a Cedarwell-family gate specialist focused only on gates: repair, installation, and electric operator work. If your gate drags on the driveway or won’t latch, call (626) 649-4572 and a live person will answer, day or night.
Why Brisbane Homes Are Different
Brisbane’s residential streets run up the steep foothills east of San Bruno Mountain, and many driveways are cut into a grade. That means gates were often hung on posts that were never plumb-set to begin with. The result is a gate that slowly racks over the years: hinges wear on an angle, the latch drifts out of alignment, and one morning the gate drags an inch into the concrete or stops latching entirely. In hillside neighborhoods along Hillside Boulevard and around Visitacion, we see this constantly. The gate didn’t fail overnight. It has been telling you for years.
Then there’s the air. The Bayshore corridor funnels marine air straight off the bay through Brisbane, and that salt-laced fog sits on gate hardware. Hinges, latches, and operator mounting brackets rust here faster than they do ten minutes inland in Millbrae or Burlingame. When we choose replacement hardware for a Brisbane gate, we account for that. Galvanized and powder-coated parts last; raw steel doesn’t.
Most Brisbane homes are mid-century builds from the 1950s through the 1970s, and many still have their original wrought-iron or tubular steel driveway gates. Those gates are worth repairing. The steel is often thicker than what’s sold today, and a worn hinge or a rusted latch doesn’t mean the gate is done. It means the hardware needs attention, and on a slope, the post alignment needs a second look at the same time.
Our Main Brisbane Services
The two calls we get most from Brisbane homeowners are a gate that won’t close properly and an electric opener that’s stopped responding. Each service has its own Brisbane page with local pricing and details.
Gate Repair in Brisbane
A sagging gate on a Brisbane hillside is rarely just a hinge problem. We check the post alignment first, because a post that was never plumb-set on a grade will wear out new hinges in a season. Then we replace what’s worn: hinges, latch, or the post base, with hardware selected to hold up against salt air. Floors stay protected while we work. See Gate Repair in Brisbane for typical repair costs on this side of the hill.
Gate Installation in Brisbane
Installing a gate in Brisbane usually means working with a slope. We set posts with the grade in mind, not against it, so the gate swings clean from day one and keeps swinging clean years later. We handle everything from a single pedestrian gate to a full driveway gate with the frame, latch, and hardware included. See Gate Installation in Brisbane for what a full installation covers.
Electric Gate Repair in Brisbane
Electric gate operators in Brisbane have two enemies: salt air and hillside drainage. Salt corrodes the control board connections and limit switches. Poor drainage means water sits in the operator housing after winter storms. We open the unit, clean the contacts, and replace what’s failed rather than selling you a whole new operator when a relay would solve it. See Electric Gate Repair in Brisbane for operator pricing and common faults we fix.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Brisbane
We work on Viking, Ghost Controls, DoorKing, and Elite operators, plus the other major residential brands. Our techs carry common relays, remote controls, and safety sensors for these brands, so most repairs finish on the first trip. See our brands for the full list.
Pricing for Gate Company in Brisbane, CA
| Service | Typical range in Brisbane |
|---|---|
| Hinge replacement and realignment (steel driveway gate) | $180 - $340 |
| Gate latch replacement | $110 - $185 |
| Post plumb and reset (hillside gate) | $260 - $520 |
| Driveway gate frame straightening | $150 - $350 |
| Operator arm or bracket replacement | $120 - $250 |
| Operator motor replacement | $400 - $850 |
| Electric operator troubleshooting and repair | $160 - $320 |
| Safety sensor replacement or realignment | $90 - $180 |
| Control board replacement | $350 - $750 |
| Full gate installation (materials included) | $1,800 - $4,500+ |
Two things push Brisbane prices toward the higher end: slope work that requires resetting a post, and hardware replacement on rusted components that need cutting rather than unbolting. Before any work starts, you’ll get a written price. No surprises on the invoice.
Neighborhoods We Serve in Brisbane
We cover the whole city, from the hillside streets off Hillside Boulevard down to the flats near the bay. Most Brisbane calls can be scheduled within one to two business days, and emergency repairs can often be handled sooner.
- Hillside Boulevard area
- Visitacion neighborhood
- Bayshore flats (east of Old County Road)
- Sierra Point and the shoreline area
- Central Brisbane (near the downtown corridor)
Service Area – Cities Near Brisbane
We also serve neighboring communities along the Bayshore corridor and the northern Peninsula: South San Francisco, CA, Daly City, CA, San Bruno, CA, and Millbrae, CA. Each has its own gate challenges, but the mariner air and hillside grading in Brisbane are the ones we know best.
Serving Brisbane, CA - Our Local Coverage Area
We’re based in the Brisbane area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Brisbane
Yes. Steep driveways and sloped gate posts are the norm here, not the exception. We check post plumb on every hillside repair because a gate that’s racking on a grade will keep wearing out hardware until the post is corrected.
Most gate repairs and hardware replacements don’t need a city permit. For new installations that change a driveway opening or add an electric operator, Brisbane may require a simple building permit. We can tell you what applies for your specific street and project.
We cover the entire city, from the hill up near the mountain to the bay side. Scheduling works around your hours, and the tech who arrives is background-checked, uniformed, and carrying shoe covers and drop cloths for anything inside the house.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Brisbane Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco