Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterLinear Gate Installation in Los Angeles: What to Know First
Linear gate installation in Los Angeles typically runs between $850 and $3,200 depending on whether we’re mounting a new operator on an existing gate or building the gate structure itself. Most Linear operator installations take one full day, and we always provide a written price before any work begins. If you’re calling about a Linear opener that isn’t cooperating or a gate that needs to be replaced outright, we can help you sort out the smartest path with a free estimate.
This page is for Los Angeles homeowners who already own a Linear product, are considering one, or inherited one with a house they bought. It’s also for property managers in neighborhoods like Palms, Mar Vista, and Sherman Oaks who need a straight answer on whether repairing a Linear unit makes more sense than replacing it. If that sounds like you, call us at (626) 649-4572 and a real person will answer, day or night.
Key Takeaways
- We’re an independent Linear service provider, not a factory-authorized dealer, which means we’re not restricted to Linear-only parts when something better exists.
- Most Linear gate installation work in Los Angeles is completed in one day with a written price before we start.
- We service Linear operators, Linear gate openers, and Linear accessories, plus LiftMaster, Mighty Mule, Ghost Controls, and DoorKing systems when there’s a mixed setup.
- Every Linear installation carries our 365-Day Done Right Promise. If it isn’t right, we make it right.
- Cody Beckman, our owner, studied welding and metal fabrication at Los Angeles Trade-Technical College and has worked gates across the Westside and into the Valley for the better part of two decades.
How Linear Products Fail - and How We Fix Them
Linear has made reliable gate hardware for a long time, but every product line has its patterns. Here are the five failure modes we see most often on Linear equipment in Los Angeles, and what we actually do about them.
- Linear LRA and LRA-K series receiver drift. On older Linear multi-code receivers, the internal tuning coil drifts with age and heat. In Los Angeles, where receivers sit in direct sun against stucco walls, we see units stop recognizing remotes after two or three years. The fix is usually a receiver replacement or a newer Linear receiver board, not a full operator swap. We quote the board and the labor separately so you can see exactly where the money goes.
- Linear APeX and Mighty Mule hybrid confusion. A number of Los Angeles homes have a Linear arm mounted to an older Mighty Mule bracket, or the reverse. The bolt patterns are close but not identical, and a unit that’s been force-fitted will tear its own mounting holes over time. When we install, we redrill the post to the operator’s true pattern and fill the old holes. That’s the kind of repair that prevents a $300 re-mount job from becoming a $1,400 post replacement.
- Linear PRO series board capacitor swelling. On Linear PRO and PRO-X swing gate operators, the electrolytic capacitors on the main control board are the usual cause of a gate that starts fine, stops mid-travel, and then won’t respond for ten minutes. The capacitor swelling is visible once the cover comes off. If the board is otherwise healthy, a board-level capacitor replacement saves the cost of a new control board, but if the board shows heat scoring, we recommend replacement and explain why. We’ll show you the old parts before we leave.
- Linear DC series solar-adjacent voltage sag. Los Angeles has enough coastal overcast and enough inland heat that a Linear DC-powered gate operating on a solar panel can drop voltage exactly when it’s asked to open against a warm, stiff hinge in the afternoon. Solar doesn’t fail, but it does get tired. We check panel output, battery health, and hinge drag together because fixing only the electronics leaves the mechanical resistance in place. That combination check is what keeps a Linear DC gate working through a full August week.
- Linear HAE00001 and remote compatibility gaps. We get calls where a homeowner bought a replacement Linear remote on their own and the opener still won’t learn it. In many cases the opener is in a restricted learn mode or the remote is a different frequency generation, and the fix takes five minutes with the right programming sequence. If the remote does turn out to be incompatible, we’ll tell you the exact model to return and the one that will work, so you’re not buying remotes twice.
The gate should open quietly and close all the way. That’s really the whole job.
Our Linear Gate Installation Process
Every Linear job follows the same quiet routine, and you’ll know what to expect before the technician arrives.
- 1
Call and describe the gate. When you call (626) 649-4572, a live person writes down the Linear model number if you can see it, the gate style (swing, slide, double, pedestrian), and what the opener is doing or not doing. That lets us bring likely parts on the first trip.
- 2
On-site inspection and honest diagnosis. The technician checks the operator, the gate itself, the hinges, the power source, and the safety inputs. We ask before touching anything, and we lay down drop cloths and put on shoe covers if we need to step inside a garage or through the house to reach the control box.
- 3
Written price, no pressure. Before any work begins, you see the exact number for parts and labor on paper. If the repair would cost more than replacement and we can articulate why, we tell you that plainly. You decide, and you never owe us a trip fee for the estimate.
- 4
The installation itself. We mount the operator, set travel limits, wire the safety edges and photo sensors if the setup calls for them, and adjust the force settings so the gate closes fully without slamming. OEM parts stay in the job where warranty matters; we use quality aftermarket parts where they make more financial sense, and we tell you which is which.
- 5
Test, teach, and clean up. We run the gate through a full open-close-open cycle at different remote distances and check the obstruction sensing. Then we walk you through the basics, hand you the remote, and take a photo of the clean work area before we leave.
Every step above is backed by the 365-Day Done Right Promise. If something about the install isn’t right, we make it right.
What Linear Gate Installation Costs in Los Angeles
Here’s how the pricing tends to land for Los Angeles Linear work. These are honest ranges for typical single-family gates, and you’ll always see your exact number in writing before we start.
- Linear operator installation on an existing, healthy gate: $850 to $1,600, depending on the model and whether the power is already at the post.
- Linear swing gate replacement (single gate, operator included): $1,800 to $2,800 for a standard steel or aluminum gate with new hinges and a properly set post.
- Linear sliding gate replacement: $2,200 to $3,200 depending on track condition and the weight of the new gate. If the track itself is bent, that adds to the job and we’ll show you the old track before we swap it.
- Linear control board replacement: $280 to $520 installed, including reprogramming all existing remotes.
- Linear remote or receiver pair, supplied and programmed: $90 to $260 depending on the system’s age.
The two variables that move a Los Angeles Linear quote the most are the gate’s weight and whether electrical power already exists at the operator location. Concrete posts and long driveways add time, and time is the honest driver of cost. Call (626) 649-4572 for a free estimate that accounts for your exact gate and post condition.
Why Los Angeles Homeowners Call Latch & Post Gate Repair for Linear Work
Latch & Post Gate Repair is part of the Cedarwell family of independently owned and operated gate specialists, and we’ve worked on Los Angeles gates since 2009. Every technician is background-checked and uniformed, and every visit follows the same Cedarwell C.A.R.E. values: clean up like it’s our own home, ask before we move or touch anything, respect your time and quiet hours, and explain the price before the work. We bring shoe covers and drop cloths on every visit, and we can schedule around nap time if quiet matters at your house.
We choose pet-safe lubricants where there’s a choice. We keep our shop focused on gates so we know Linear’s quirks, and because some Los Angeles properties run mixed brands, our technicians are factory-trained on LiftMaster, Mighty Mule, Ghost Controls, and DoorKing too. That means when your Linear operator shares a property with a Ghost Controls pedestrian gate, one technician can diagnose both. Written pricing always. A live person always.
Frequently Asked Questions
Yes, we install Linear operators on existing swing and slide gates throughout Los Angeles, provided the gate’s posts and hinges are structurally sound. If the gate itself is sagging, we’ll tell you clearly whether the opener can be installed as-is or whether the gate needs to be re-hung first. You’ll have the full picture in writing before you commit to anything. Call (626) 649-4572 and we’ll schedule the inspection.
Most Linear operator installations are completed in a single day, assuming power is already present at the gate post and the gate itself is in reasonable condition. A full gate and operator replacement usually takes one full day as well, though concrete pouring or post-setting can push the job into a second visit. We’ll tell you the schedule up front, and we work clean: drop cloths down, shoe covers on, and a photo of the clean-up before we leave.
If your gate was recently installed and is still under a labor warranty from another company, we recommend checking with that company before we begin, but physical installation of a new operator generally does not void a gate frame warranty. We follow manufacturer torque specs and wire the operator according to Linear’s documentation, and we keep aftermarket parts out of warranty-sensitive positions unless you specifically ask us to save money. As an independent Linear service provider, we’re not required to use Linear-only parts on out-of-warranty equipment, and we’ll explain the trade-off at the quote stage.
Generally, if your Linear opener is under ten years old and the issue is a receiver, board, or remote, repair makes financial sense. If the motor itself is failing, the gear train is worn, or the opener is over twelve years old and you’re facing a multi-part repair, replacement often wins. In Los Angeles, sun and heat age electronics faster than the motor, so we look at capacitor condition and board scoring, then give you both repair and replacement numbers and let you decide. Call (626) 649-4572 for the inspection.
Yes, we run low-voltage and line-voltage conduit from the house or panel to the gate operator as part of a Linear installation, and we handle solar tie-ins for Linear DC systems as well. Los Angeles properties vary widely, from stucco walls in Palms to cinder block in the Valley, and the routing is different on each one. We’ll map the run before we quote so there are no surprises about trenching or wall penetrations.
Call Latch & Post Gate Repair for Linear Gate Installation in Los Angeles
If you need a Linear gate opener installed, a Linear opener diagnosed, or an honest second opinion on a gate you already own, call us at (626) 649-4572. A live person answers 24 hours a day, seven days a week. We’ll schedule a visit, give you a written price before any work starts, and leave your property cleaner than we found it. Floors protected, kids and pets undisturbed, price explained in plain English. That’s the job.
Written by Cody Beckman, Owner, Latch & Post Gate Repair, serving Los Angeles and nearby areas.