Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in San Diego, CA | Latch & Post Gate Repair
We provide independent Gate Repair in San Diego for Ghost Controls systems, from the canyon-rim driveways of Clairemont to the master-planned HOA entries in Rancho Bernardo. The one thing that makes our Ghost Controls work here different is that we’re not just swapping parts; we’re accounting for salt air, sloped lots, and fire-code compliance that flat, dry cities never face. For a written price before any work starts, call (626) 649-4572.
Ghost Controls operators are built for solar and low-voltage swing-gate duty, and they’re popular in San Diego because so many homeowners want battery-powered automation without trenching 120V line. But that same solar-friendly design means our repair calls here skew toward battery faults, corrosion on outdoor terminals, and arm geometry fighting a gate that gravity has pulled off-plumb. We carry Ghost Controls OEM control boards, arms, and battery kits on the truck, so most San Diego service calls finish in one visit. As an independent shop, we’re not authorized by Ghost Controls; we simply work on their systems every week and keep that knowledge current across the whole Ghost Controls sales & service range our customers run.
Why San Diego Residents Choose Us for Ghost Controls Service
Cody Beckman, the owner here at Latch & Post Gate Repair, has spent the better part of two decades working gates across Southern California, and he’s the person neighbors call when a LiftMaster operator quits mid-cycle or a wrought-iron post has drifted far enough out of plumb that the latch won’t catch anymore. He studied welding and metal fabrication at Los Angeles Trade-Technical College, which matters when we’re re-leveling a sagging Ghost Controls arm on a graded San Diego driveway. The gate should open quietly and close all the way. That’s really the whole job.
We’re part of the Cedarwell family of gate specialists and we’ve been doing this since 2009, which means we’ve seen how Ghost Controls operators behave after five or six San Diego marine-layer seasons. Our techs are factory-trained on Ghost Controls alongside LiftMaster, FAAC, BFT, DoorKing, and the other brands families actually own. Every visit comes with a written price before work starts, shoe covers and drop cloths, and a photo of the clean-up before we leave. If the repair isn’t right, our 365-Day Done Right Promise means we make it right, no fine print.
Common Ghost Controls Gate Repair Problems We Solve in San Diego
- Control-box terminal corrosion from marine-layer salt air. San Diego’s coastal fog carries salt inland from Ocean Beach through Pacific Beach to La Jolla, and it settles on Ghost Controls control-board terminals and actuator-arm pivots far faster than inland owners expect. We see oxidized connectors and seized arm pivots on five-year-old operators that would still be clean in Riverside.
- Solar-charging underperformance during marine-layer months. A Ghost Controls 10W panel mounted under canyon-side shade or coated with coastal fog residue stops topping off the battery, and the gate starts failing intermittently. The call comes in as “gate won’t open” but the fault is low voltage, not the motor.
- Arm grinding or tripping safety limits on sloped driveways. Canyon-rim lots in Clairemont and Allied Gardens mean swing gates that have sagged out of alignment, and the Ghost Controls arm ends up fighting the gate through every cycle. The current-sensing safety kicks in, or the arm grinds at the open and close limits.
- Battery-backup and fail-safe failures flagged by fire inspectors. After the 2003 Cedar Fire and 2007 Witch Creek Fire, HOA communities in Scripps Ranch and Rancho Bernardo started testing emergency gate-open compliance routinely. A Ghost Controls kit with a dead or undersized battery fails that test, and the inspector’s notes land on the homeowner’s desk.
- Actuator-arm wear from daily use on heavy ornamental gates. Older Mission Hills and North Park homes often pair original wrought-iron gates with retrofitted Ghost Controls operators, and the added weight accelerates arm wear. We replace the arm and re-balance the gate so the new one isn’t fighting dead iron.
Ghost Controls Service in San Diego: What Local Conditions Mean for Your Equipment
San Diego County fire authority enforcement of emergency gate-access after the 2003 Cedar and 2007 Witch Creek fires means Ghost Controls battery-backup and fail-safe-open performance actually gets tested during HOA inspections in Scripps Ranch and Rancho Bernardo, a compliance layer that almost never comes up in other metro markets. If your Ghost Controls kit has a battery that’s more than a few seasons old, or the fail-safe release hasn’t been exercised in a year, that inspection is where it shows up. We routinely field calls from homeowners who got a fire-inspector notice and need a battery replacement, wiring correction, or a Knox-box integration that lets emergency crews open the gate without a fight. That’s not a repair scenario we see anywhere else in California, and it means San Diego Ghost Controls owners should think about battery age as a compliance issue, not just a convenience one.
We got a call from a homeowner in Clairemont whose Ghost Controls dual-swing kit had started stopping mid-travel on the sloped driveway. On arrival we found the gate sagging against the arm, plus corrosion on the control-box terminals from marine-layer air. Our tech re-leveled the hinge posts, replaced the actuator arm and battery, re-terminated the corroded connections, and ran a manual-release test before we left. The gate cycled clean, and the owner kept our number on the fridge.
Ghost Controls Models & Products We Service in San Diego
We cover the full Ghost Controls lineup we see installed across San Diego: the Heavy-Duty Dual Swing Operator Kits like the TSS1 and TDS series, the Single Swing Automatic Gate Opener Kits including TSS1 and TSS2, the Solar-Powered Gate Opener Kits with 10W panels, and the accessory line like AXDP keypads, AXR1 remotes, and ABBT or ABAT battery kits. We stock Ghost Controls OEM control boards, arms, and battery kits alongside quality aftermarket solar panels, keypads, and safety edges that meet the same specs at a lower cost. When we’re replacing a corroded coastal-zone operator where the housing and terminals are already salt-eaten, we’ll tell you straight whether a rebuild is worth it or whether our Gate Installation in San Diego makes more sense than chasing one failed part at a time. Most standard Ghost Controls swing-gate repairs in San Diego run between $180 and $450 for parts and labor, and you’ll see the exact number in writing before we touch anything.
Ghost Controls Service Pricing in San Diego
Most Ghost Controls repair work we do in San Diego falls into a few clear bands. A worn actuator-arm replacement on a single-swing kit typically runs $220 to $380. Battery replacement with a new ABBT or ABAT kit is usually $120 to $250 installed. Control-board replacement runs $260 to $480 depending on the model. A full solar-panel and charging check lands around $95 to $150. The big variable is corrosion, a coastal-zone Gate in Ocean Beach or Pacific Beach often needs additional terminal cleaning, connector replacement, or arm-pivot service that an inland gate wouldn’t. Every estimate is free, written, and quoted before any work begins, which means the number you approve is the number you pay. Call (626) 649-4572 for an exact quote.
Serving San Diego, CA - Our Local Coverage Area
We’re based in the San Diego area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in San Diego
Your battery is likely not recharging because the solar panel is underperforming, not because the panel is bad. San Diego’s marine layer pushes fog and salt residue over coastal mesas, and a panel that’s shaded by canyon walls, tree cover, or a haze film stops delivering enough charge to top off the battery. We test panel output, clean the glass, and check battery health before recommending anything. Call (626) 649-4572 and we’ll diagnose it in one visit.
Yes, in HOA communities across Scripps Ranch, Rancho Bernardo, and parts of East County, inspectors test emergency gate-open performance as part of fire-code enforcement that tightened after the 2003 and 2007 wildfires. A Ghost Controls kit with a dead or undersized backup battery fails that test. We replace batteries, restore fail-safe open operation, and coordinate Knox-box access so the gate passes the next inspection.
Usually it’s the gate. Gravity sag on a graded driveway pulls the swing gate out of alignment, and the Ghost Controls arm ends up fighting the gate every cycle while the current-sensing safety trips or the arm grinds at the limits. We re-level the hinge posts and the gate before condemning the operator. Half the time the motor is fine; the gate was the problem all along.
Yes, and measurably. Marine-layer air from Ocean Beach through Pacific Beach to La Jolla pushes salt-laden moisture inland, and you’ll see Ghost Controls control-box terminals, actuator-arm pivots, and battery connections oxidize noticeably by the five-to-seven-year mark. Inland gates routinely go ten-plus without the same damage. We replace corroded terminals, re-coat exposed metal, and can suggest a maintenance schedule for coastal-zone gates.
Yes. We regularly add AXDP keypads, AXR1 remotes, and phone-entry systems to existing Ghost Controls operators across San Diego. We can also wire in safety edges and integrate with a Knox box where fire-code compliance requires it. Call (626) 649-4572 and we’ll tell you what’s compatible with your specific system.
Service Areas Near San Diego
We’re based in San Diego and serve the full San Diego service area, including coastal neighborhoods like Ocean Beach, Pacific Beach, and La Jolla, plus Clairemont, Allied Gardens, Kearny Mesa, Mission Hills, North Park, Scripps Ranch, Rancho Bernardo, and Carmel Valley. For our wider market, see Ghost Controls service in Dallas and Ghost Controls service in Fort Worth.
Book Your Ghost Controls Service in San Diego Today
A live person answers our phones 24/7, including nights and weekends. For same-day Ghost Controls repair in San Diego, a free estimate, or a written price before any work starts, call (626) 649-4572.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving San Diego since 2009.