Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Malibu, CA
Malibu gates live harder than almost anywhere else in California. Salt air off the Pacific eats standard steel hardware within a few years, and Santa Ana winds funnel through the canyons with enough force to bend lightweight frames and strip gear teeth on under-spec’d openers. Most of the homes we visit are either beachfront compounds along PCH and Carbon Beach or custom canyon estates off roads like Kanan Dume, Latigo Canyon, and Decker Canyon – nearly all gated for privacy. Whether it’s a corroded hinge, a sluggish opener, or a full replacement, the job starts with a written price before any work begins. Call (626) 649-4572 and a live person answers, any hour.
Why Malibu Homes Are Different
Marine corrosion is the defining problem here. Within a half-mile of the shoreline, standard steel hinge pins, motor housings, and control boards degrade at a rate inland gate companies rarely see. We specify marine-grade stainless or powder-coated aluminum on those jobs because the alternative is replacing the same part again in 24 months. The other factor is the post-Woolsey Fire rebuild. Many homes rebuilt after 2018 had gates installed under time pressure with residential-grade operators that were never rated for canyon drainage salt air. Those units are failing at three to five years, well ahead of their rated lifespan. Add California Coastal Commission permit requirements on replacement work, and Malibu gate jobs need a company that understands both the hardware and the paperwork. One more local reality: Santa Ana events push lateral loads through Malibu Canyon and Encinal Canyon that automatic openers rated for inland conditions simply don’t survive.
Our Main Malibu Services
Most Malibu homeowners call us for one of three things: a gate that won’t close, a gate that needs to be built new, or an electric system that stopped responding. Each service has its own Malibu page with local pricing and FAQs.
Gate Repair in Malibu
Sagging hinges, failed latches, and rusted posts are the calls we get most often from Malibu properties. Salt air accelerates every one of those failures. We carry marine-grade replacement hardware on the truck for exactly this coastline, and we’ll give you a written price before we touch anything. On a repair visit, we lay drop cloths inside the home and put on shoe covers first. Gate Repair in Malibu has the full breakdown of common fixes and local pricing.
Gate Installation in Malibu
New gate work in Malibu often means either a post-Woolsey Fire rebuild or a Coastal Commission-regulated replacement on an existing property. We handle the gate itself – the latch and the post, as the name says – and we coordinate with your contractor on permit sequencing so you’re not left with a gap in your perimeter longer than necessary. A new gate should be specified for marine exposure from day one. Gate Installation in Malibu covers materials, timelines, and what a full install includes.
Electric Gate Repair in Malibu
Keypads, intercoms, CCTV integration, and opener motors on Malibu estate gates fail differently than inland systems. Salt corrosion inside control boards is the most common culprit, followed by Santa Ana wind damage to gear teeth. We’re factory-trained on Viking, Ghost Controls, DoorKing, and Elite, and we keep common boards and motors stocked for faster turnaround. Electric Gate Repair in Malibu walks through diagnostics and local pricing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Malibu
We’re factory-trained on the brands Malibu homeowners actually have: Viking, Ghost Controls, DoorKing, and Elite, among others. We stock common replacement parts for these locally, which means fewer return trips when a board fails. See the full our brands list for compatibility details.
Pricing for Gate Company in Malibu, CA
| Service | Typical range in Malibu |
|---|---|
| Gate latch replacement | $180 – $340 |
| Hinge replacement (standard pair) | $220 – $400 |
| Gate frame realignment | $250 – $450 |
| Gate opener motor replacement | $450 – $900 |
| Control board replacement | $350 – $700 |
| Keypad or intercom replacement | $250 – $550 |
| Full gate installation (standard driveway) | $2,500 – $6,000 |
| Custom estate gate installation | $6,000 – $15,000+ |
| Electric gate system install (opener + safety edges) | $1,800 – $4,500 |
| Marine-grade hardware upgrade | $400 – $1,200 |
Salt-air exposure pushes Malibu pricing toward the upper end of these ranges because marine-grade components cost more than standard steel. Coastal Commission permit fees also add to replacement work. Whatever the number, you’ll see it in writing before we start – and that’s the price, no surprises.
Neighborhoods We Serve in Malibu
We work across Malibu’s residential corridors, from beachfront streets to canyon roads. Our technicians know the difference between a PCH property with direct salt exposure and a Latigo Canyon estate where wind load is the bigger issue.
- Carbon Beach and PCH oceanfront
- Point Dume
- Malibu Colony
- Malibu Canyon and Encinal Canyon
- Kanan Dume and Latigo Canyon areas
For most Malibu repair calls, we can schedule within a few days. Emergency gate failures on PCH properties get priority because an open gate there is a real security gap.
Service Area – Cities Near Malibu
Latch & Post Gate Repair serves Malibu and the surrounding coastal and canyon communities. If your property sits just outside Malibu’s boundaries, we likely cover it too. We serve Agoura Hills, CA, Westlake Village, CA, Thousand Oaks, CA, and Calabasas, CA with the same written-price promise and care routine.
Serving Malibu, CA - Our Local Coverage Area
We’re based in the Malibu area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Malibu
We answer calls live 24/7, and for urgent Malibu gate failures – especially on oceanfront properties where an open gate means an unsecured perimeter – we prioritize same-day or next-morning dispatch. Call (626) 649-4572 and we’ll tell you honestly when we can be there.
We coordinate with your contractor or architect on the gate portion of any Coastal Development Permit, but we don’t file permits ourselves. If your gate replacement sits within the Coastal Commission’s jurisdiction, we’ll make sure the gate spec matches what the permit calls for before we build anything.
Not if it’s specified for the location. We use marine-grade stainless or powder-coated aluminum on Malibu jobs within a half-mile of the shoreline, and we recommend the same for canyon properties where drainage salt air travels inland. You’ll pay more up front, and you’ll replace hardware far less often.
Yes. If you tell us quiet matters between certain hours, we’ll schedule the work accordingly and use quiet tools where possible. We also ask before moving anything on the property, and we leave with a photo of the clean-up.
If your Malibu gate is failing, sagging, or just not responding, call Latch & Post Gate Repair at (626) 649-4572 for a free estimate. A live person answers, and your written price comes before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Malibu Customers Say
"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide