Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Garland, TX
Gate work in Garland is different from what you’d find twenty miles west. The Blackland Prairie clay under this city moves more than most structures were ever built to handle. Posts that were set square in the 1970s drift out of alignment every spring, and the 100° plus summer heat opens cracks that let more moisture in. We’re Latch & Post Gate Repair, a Cedarwell-family gate specialist, and every job we do here starts with one question: what’s the clay doing under this gate? Call (626) 649-4572 and you’ll speak with a live person, day or night.
Why Garland Homes Are Different
Central and west Garland is thick with 1960s to 1980s ranch-style tract homes. The original wooden privacy fences and gates from that era were set with shallow concrete collars, maybe 18 to 24 inches deep. On the expansive clay underneath Garland, that’s nowhere near enough. The soil swells several inches in wet springs, then shrinks and cracks through the summer until the concrete collar has nothing solid to grip. Gates bind, drag, or stand open with a three-inch gap at the latch. Newer eastern Garland subdivisions lean toward ornamental iron and aluminum swing or slide gates, many governed by HOA aesthetic codes. Different hardware, same clay. Any repair here that doesn’t address post depth and drainage is a temporary fix.
Our Main Garland Services
Most Garland calls fall into two camps: a gate that won’t close properly, or a gate that needs to be replaced entirely. Here’s what each involves in this city.
Gate Repair in Garland
When a gate drags or won’t latch in Garland, the first suspect is usually the post underneath it, not the hardware on top of it. We diagnose the whole assembly: post lean, hinge wear, latch alignment, and whether water is pooling at the base. A reset post in shallow concrete just fails again in two or three seasons. The fix that lasts in these clay neighborhoods means pulling the post and resetting it at 36 to 42 inches with a gravel drainage collar. Learn what a full repair covers on our Gate Repair in Garland page.
Gate Installation in Garland
New gates in Garland need to be planned around the clay, not dropped in like a fence panel. We set posts deeper than code minimums where the soil cycle is active, and we pick hardware sized for the gate’s actual weight and swing. HOA subdivisions on the east side often require matching specific iron profiles or aluminum finishes, so we coordinate with the association’s written standards before the first post hole is dug. Get the full scope and our written-price process on the Gate Installation in Garland page.
Electric Gate Repair in Garland
Electric gate failures in Garland happen for two reasons more than any others: the gate was never aligned properly for the shifting soil, or the opener was under-sized for the gate’s actual weight. When a motor strains against a gate that’s drifted out of square, the control board fails early, and safety edges start false-triggering. We service the automation brands most Garland families own and test every limit switch before we call the job done. See how we diagnose and fix these systems on our Electric Gate Repair in Garland page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Garland
We work on the brands Garland homes actually have installed: FAAC, BFT, Linear, and Viking are the ones we see most often in this city’s newer subdivisions. We carry common parts for these on our trucks, which means many repairs finish in one visit. You can see the full list of equipment we’re factory-trained on at our brands page.
Pricing for Gate Company in Garland, TX
| Service | Typical range in Garland |
|---|---|
| Gate latch replacement | $85 - $200 |
| Hinge replacement (standard pair) | $120 - $250 |
| Wooden gate board replacement (per board) | $40 - $90 |
| Post reset with gravel drainage collar | $350 - $700 |
| Gate alignment and tune-up | $125 - $275 |
| Aluminum or iron gate welding repair | $180 - $450 |
| Electric opener replacement (basic) | $600 - $1,400 |
| Electric opener circuit board replacement | $200 - $500 |
| Safety sensor or edge replacement | $150 - $350 |
| Full gate installation (standard single swing) | $900 - $2,500 |
In Garland specifically, a post that needs to be pulled and reset with a drainage collar pushes the price toward the top of that range. That’s not upselling; it’s the difference between a gate that stays square and one that’s dragging again by August. You’ll see the exact number in writing before we start anything, and the price we quote is the price you pay.
Neighborhoods We Serve in Garland
We run calls all across Garland, from the older ranch streets west of downtown out to the newer HOA subdivisions around Firewheel and east of Bobtown Road. Most neighborhoods see same-day or next-day scheduling depending on workload.
- Camelot and Shores
- Firewheel
- Club Hill
- Oakridge
- Travis College Hill
Service Area – Cities Near Garland
We also serve Garland’s bordering cities, including Sachse, TX, Rowlett, TX, Wylie, TX, and Richardson, TX. If you’re on the edge of Garland or just across a municipal line, call and we’ll confirm coverage. Scheduling is coordinated from the Dallas-Fort Worth office, and crews serve Garland locally.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Garland
Most Garland addresses are on our normal route rotation, so same-day or next-day scheduling is typical. Emergency calls for a gate that won’t close or secure are handled around the clock. Call (626) 649-4572 and a live person will tell you exactly when we can be there.
In HOA-managed subdivisions, especially newer eastern Garland communities, yes, many associations require written approval before a gate is replaced or its color or style changes. We work from the association’s standards and can help you gather what’s needed before the estimate.
If a post is reset in shallow concrete, yes, it will shift again within two or three seasons. The long-term fix in Garland’s clay is a post set at 36 to 42 inches with a gravel drainage collar. We quote that option when the soil condition calls for it. Call (626) 649-4572 for an exact quote. Estimates are free.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Garland Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco