Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Garland
A new driveway gate in Garland typically costs between $2,800 and $9,500 installed, depending on material, width, and automation. Most swing gate installations take one to two days once the gate is fabricated, and we schedule a free on-site measure first so you see a written price before anything gets built. Call (626) 649-4572 to talk through your options with a live person, any time.
We work across Garland every week, from the ranch-style neighborhoods off Saturn Road to the newer subdivisions east of Firewheel. What makes gate work different here is the ground itself. The Blackland Prairie clay under central and west Garland swells and shrinks with every wet spring and dry summer. A gate that we install without accounting for that movement will be dragging within two years. So we account for it from the first measurement.
Why Latch & Post Gate Repair Is Garland’s Preferred Gate Installation Company
We’re a Cedarwell-family gate specialist, not a general handyman. Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on, and it’s why Garland homeowners call us for installations that have to survive this soil. Our technicians are background-checked and uniformed, trained on FAAC, BFT, Linear, and Viking automation, and they work to the Cedarwell C.A.R.E. values on every visit: clean up like it’s our own home, ask before we move anything, respect quiet hours, and explain the price before the work starts.
We recently replaced a failing wooden privacy gate for an early-1960s ranch home off Saturn Road in central Garland, where the original shallow concrete collars had heaved in the clay and left the gate dragging. Instead of patching the hinge post, we pulled it, augured down to 40 inches with a gravel drainage collar, and reset the post below the active soil zone, then mounted a Ghost Controls solar gate opener on the rebuilt frame. The gate cleared the ground through the next wet spring, which shallow-poured posts in that neighborhood almost never do.
Gate Opener Installation in Garland
Gate opener installation in Garland means pairing the right automation with a gate that has to keep working through clay movement, ice storms, and 100-degree afternoons. We install and service opener systems from FAAC, BFT, Linear, and Viking, and we always match the opener to the gate’s weight, swing radius, and wind load rather than bolting on whatever is in stock. A typical gate opener installation in Garland runs $1,200 to $3,400 including the motor, arm or slide track, safety components, and wiring, and you’ll see the exact number in writing before we begin.
Solar Openers for Garland Driveways
Many Garland homes have driveway gates set far from the house, which makes running power expensive or disruptive. Solar gate openers, like the Ghost Controls systems we install, handle Garland’s long sunny stretches well and avoid trenching across the yard. We still recommend a battery backup so the gate works during the cloudy spells that come with winter storms.
Installing Openers on Existing Gates
If your gate is solid but manual, we can add an opener without rebuilding the whole thing. The key in Garland is checking the posts first. An opener added to a leaning post will burn out its motor forcing a misaligned gate, so we measure post plumb and footing depth before we quote the automation.
Gate Fabrication in Garland
Gate fabrication in Garland is where we design and build a gate around this city’s specific conditions: clay movement, tight lots, HOA codes, and wind. For a standard driveway gate, fabrication and installation together usually land between $2,800 and $9,500 in Garland, with ornamental iron and aluminum at the higher end and wood privacy gates lower. We measure, fabricate, and install as one job so the gate, posts, and opener are built to fit each other and the ground they sit in.
Custom Iron and Aluminum Gates
Eastern Garland HOA subdivisions lean toward ornamental iron and aluminum, and each association has its own code for height, color, and design. We build to those codes because a gate that violates the architectural guidelines gets flagged and has to be redone. Our fabrication process lets us match existing fencing and hardware so the new gate looks like it was always there.
Wood Privacy Gates Rebuilt for Clay Soil
Central and west Garland ranch homes were often built with shallow-set wooden gate posts. When we fabricate a replacement, we pull the old post completely and reset the new one at 36 to 42 inches with a gravel drainage collar. That drainage detail matters just as much as the post depth in clay; it keeps water from pooling around the base and accelerating the very soil movement that threw the old gate out of square.
Trusted Brands We Service in Garland
Our Garland technicians are factory-trained on the brands families actually own: FAAC, BFT, Linear, and Viking, along with Ghost Controls, LiftMaster, DoorKing, Elite, and Mighty Mule. Because we’re gate specialists rather than general contractors, we keep common opener parts and gate hardware available locally for Garland jobs, which means fewer return visits and faster turnarounds when a storm takes out a board or a motor. If your gate runs on one of these brands, we can service it and install compatible upgrades without swapping in mismatched parts.
Common Gate Installation Problems We See in Garland Homes
- Clay heave lifts shallow-set posts. The Blackland Prairie clay under Garland swells several inches during spring rains and shrinks through August. Posts set in shallow concrete move with the soil, and the gate starts binding, dragging, or standing open no matter how new the hardware is.
- Ice storms freeze latch mechanisms solid. North Texas freezes hit Garland gates hard. Metal latch parts freeze, moisture-stressed wooden boards warp, and the thaw leaves the swing gate out of square and hard to close.
- HOA subdivider gates fail at the hinge post. In eastern Garland subdivisions, ornamental iron and aluminum gates are often installed with undersized hinge posts or the wrong automation. The gate looks fine until the post gives or the opener isn’t rated for the gate’s weight.
- Wind load on solid infill gates. Garland sits in a storm corridor where straight-line winds can hit gate panels hard. A solid wood or metal infill gate acts like a sail, and if the post wasn’t set deep enough, that wind does the same damage as three wet springs in one afternoon.
Pricing for Gate Installation in Garland, TX
Here’s what we see across Garland: a basic manual wood gate replacement runs $800 to $2,200. A full driveway gate with opener runs $2,800 to $9,500. Gate opener installation on an existing gate runs $1,200 to $3,400. Deep post resetting, required on most central and west Garland lots, adds $300 to $800 per post depending on access and concrete removal. The written price you get before work starts is the price you pay. Call (626) 649-4572 for a free on-site estimate, and we’ll give you the exact number before we touch anything.
We Also Serve Cities Near Garland
Our Garland crews regularly work in Sachse, Rowlett, Wylie, and Richardson. If you’re in one of those cities and need Gate Installation, the same written-price and post-depth standard applies. Learn more about our work across the metro at Garland.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Garland
It’s almost always the post. Garland’s clay soil swells when wet, and posts set in shallow concrete lift with the soil. The gate itself rarely warps enough to make contact with the ground. The fix is pulling the post and resetting it at 36 to 42 inches with drainage, not planing the bottom of the gate. Call (626) 649-4572 and we’ll check the post before recommending anything.
Most automatic gates have a manual release: a keyed lock, pull handle, or toggle on the opener itself that disengages the motor so the gate can swing or slide by hand. During a Garland ice storm or outage, you want to know where that release is before the power goes. If the release is frozen or you aren’t sure where yours is, call us and a technician will walk you through it or come out.
Because Garland sits on Blackland Prairie clay, which expands and contracts enough to move a shallow-set post several inches a year. A post set 36 to 42 inches deep, with a gravel drainage collar, sits below the active soil zone and stays put through wet springs and dry summers. Shallow pours in central Garland repeat the same gate failure within two to three seasons.
In eastern Garland, the gate is usually ornamental iron or aluminum, and the HOA has rules about height, color, materials, and even opener placement. You need fabrication that matches the association’s code. In older central Garland, the challenge is the existing post depth and clay movement, which means resetting posts before hanging a new gate. We handle both, and we check HOA requirements before we fabricate anything.
Yes. Automatic gates in Garland must include entrapment protection, typically photo eyes, safety edges, or both, so the gate reverses if a child, pet, or car is in the path. We install these on every automated gate and opener we put in. It’s not an add-on. It’s part of the job and part of the written price.
Call Us for a Free Gate Installation Estimate in Garland
If you’re in Garland and thinking about a new gate, a gate opener, or rebuilding one the clay has knocked out of square, call (626) 649-4572. A live person answers, any hour. We’ll schedule a free measure, talk through your options, and put the exact price in writing before any work starts. Every installation is backed by our 365-Day Done Right Promise: if it isn’t right, we make it right, no argument.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Garland and the surrounding Dallas-Fort Worth area since 2009.