Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Cleveland, TX
Most gate work in Cleveland comes down to what the soil and the water do to steel and wood. This is Liberty County’s Piney Woods fringe, where clay soil heaves after flood events and cracks in drought, pulling gate posts out of line and throwing swing gates off their hinges. Homes here sit either in older in-town neighborhoods or on 2-to-10-acre acreage tracts off FM roads, and the gate problems are different in each. If you need a gate company in Cleveland that writes down the price before any work starts, call Latch & Post Gate Repair at (626) 649-4572.
Why Cleveland Homes Are Different
Cleveland sits where Houston’s northeast sprawl meets the Piney Woods. The housing stock tells that story: 1950s-1980s wood-frame homes inside the city limits, and a wave of newer acreage builds on private drives along FM 1010, FM 787, and the roads running east toward the Trinity River bottom. Those rural properties commonly use welded pipe ranch gates or ornamental iron automated gates on long gravel or caliche driveways, and the wood-framed in-town homes often have ornamental steel pedestrian gates hung on brick columns.
The real difference between Cleveland gate work and gate work in the Houston suburbs is the clay. When Liberty County floods – and it does, routinely, with over 55 inches of rain a year – that clay saturates and expands. In summer it contracts and cracks. Gate posts here lean and shift at rates that surprise people who moved out from the flat, better-drained west side of Houston. A gate that hung square in April can drag on its latch by August. We see that pattern constantly across Cleveland, and the fix is rarely just the latch. It’s the post footing. We look at the whole gate, not just the part that’s complaining.
Flooding shapes Cleveland gate work in another specific way. After Hurricane Harvey in 2017, large portions of the area sat underwater for days, and every gate tech who worked that aftermath learned the signature of a flooded operator: motor windings survive, but moisture kills the logic board and the safety-loop detector. That failure pattern is far more common here than in Conroe or Livingston, and it means we check the board and the loop wiring even when the motor still turns.
Our Main Cleveland Services
Cleveland homeowners call us most often for two things: a gate that won’t latch or swing properly, and an electric gate operator that stopped working. Each service has its own Cleveland page with pricing and details.
Gate Repair in Cleveland
Repair work in Cleveland usually involves sagging swing gates on shifted posts, seized rollers on slide gates, or latches that no longer line up because the post has moved. On the acreage tracts, ranch gates on pipe posts take a beating from cattle, weather, and the occasional delivery truck. We straighten posts, weld where welding is the right fix, replace hardware, and re-hang the gate so it swings clean. On the clay, we often set posts deeper than the old ones went. Every repair starts with a written price. See Gate Repair in Cleveland for full details and pricing.
Gate Installation in Cleveland
New installs here tend to be large: driveway gates on acreage, often automated, sometimes solar-powered where running conduit from the house means trenching through clay and caliche. In town, we install lighter ornamental gates for pedestrian entry and backyard access. Either way, the job starts with the post footings, because what’s under the ground in Cleveland decides what happens above it. We size the posts for the soil and the gate, then set the gate square. The written price covers the whole install. See Gate Installation in Cleveland for what’s included.
Electric Gate Repair in Cleveland
Automated gates in Cleveland work hard – long driveways mean lots of cycles, and hurricane-season rains push water into shallow conduit runs and corrode terminal blocks. We troubleshoot the operator first: limit switches, safety loops, the control board, the motor. Moisture intrusion after a flood event is the single most common cause we find, followed by failed battery backups in solar systems. We carry boards and loop detectors for the common brands, which often means a same-visit fix. See Electric Gate Repair in Cleveland for diagnostic and repair details.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Cleveland
We’re factory-trained on the equipment families across Cleveland actually use: FAAC, BFT, Linear, and Viking are the operators we see most often on local driveways. We stock common boards, loop detectors, limit switches, and remotes for those brands in our Houston-stocked van, which typically means one trip instead of two. See our brands for the full list of what we service.
Pricing for Gate Company in Cleveland, TX
| Service | Typical range in Cleveland |
|---|---|
| Gate latch replacement | $160 - $280 |
| Gate hinge replacement (2 hinges) | $180 - $320 |
| Gate post straightening / reinforcement | $300 - $650 |
| Slide gate roller replacement | $190 - $340 |
| Swing gate re-hang and alignment | $240 - $480 |
| Electric gate operator diagnostic visit | $75 - $130 |
| Control board replacement | $320 - $690 |
| Safety loop / photo eye repair | $180 - $380 |
| Full operator replacement (motor, arm, board) | $1,200 - $2,600 |
| Solar gate operator installation | $1,600 - $3,200 |
What pushes a Cleveland job above these ranges is usually what’s underground: a badly shifted post in swollen clay takes longer to re-set, and a drive gate down a long gravel lane means more running for the crew. The one thing that never changes is the process – you’ll see the full price in writing before any work begins, and it’s the price you pay.
Neighborhoods We Serve in Cleveland
We work all over Cleveland, from in-town streets to the acreage roads running east and north out of town. We know the difference between a gate on a tight in-town lot and one at the end of an 800-foot caliche drive, and we bring the right rig for both.
- In-town Cleveland (1950s-1980s neighborhoods)
- FM 1010 corridor
- FM 787 acreage tracts
- Trinity River bottom roads
- US-59 east side developments
For most Cleveland calls, we can have a technician to you the same day or next morning. For an exact arrival window, call (626) 649-4572 and we’ll tell you straight.
Service Area – Cities Near Cleveland
Latch & Post serves Cleveland and the surrounding Liberty County and East Montgomery County area. We also work regularly in Conroe, TX, Humble, TX, Spring, TX, and Willis, TX. Scheduling and dispatch run out of our Houston office, and crews serve Cleveland locally.
Serving Cleveland, TX - Our Local Coverage Area
We’re based in the Cleveland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Cleveland
Most Cleveland calls are scheduled the same day or the next morning. We’ll give you a straight arrival window when you call, and a live person answers 24/7 – no voicemail. Call (626) 649-4572 for the next available slot.
Repair work on an existing gate typically doesn’t require a permit anywhere in Cleveland. New gate installations on acreage sometimes do, depending on the county’s current rules for driveway structures. We’ll tell you what we know about your specific situation during the estimate, and we’ll never start work without confirming the answer.
Yes. The rural tracts along FM 1010, FM 787, and the roads east toward the Trinity River are some of our most common Cleveland-area calls. Long caliche driveways and welded pipe gates are familiar territory, and we arrive with what’s needed for the job the first time.
If you need a gate company in Cleveland that writes down the price before touching anything, call Latch & Post at (626) 649-4572 for a free estimate. Every visit includes the written quote, shoe covers if we step inside, and a clean-up photo before we leave.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Cleveland Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco