Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Selma, TX
Selma sits at the core of Fresno County’s raisin grape belt, which means a gate company here works on far more than ornamental driveway gates. We repair and install heavy agricultural swing gates and slide gates on vineyard parcels, packing sheds, and small farm operations, while also serving the town’s post-WWII ranch homes and 1970s-80s tract houses with older steel and chain-link perimeters. The climate does its own work too: tule fog in winter, 105°F summers, and harvest dust from August through September. If your gate won’t latch, sags, or binds, call (626) 649-4572 and we’ll give you a written price before we touch a thing.
Why Selma Homes Are Different
Selma’s residential stock is dominated by modest ranch-style homes and 1970s-80s tract houses, many on comparatively large lots with aging block-wall or chain-link perimeters and original steel swing gates. These gates have often outlasted their original hardware. Hinges pull loose from weathered wood posts, latch strikes no longer line up, and years of deferred maintenance mean a simple sag can hide a cracked weld or a rotted post footing.
The climate compounds all of it. San Joaquin Valley tule fog settles in from November through February, keeping ferrous hardware damp for weeks at a time. Rust creeps into hinge barrels and latch springs. Wood gates swell and bind in their frames. Then summer arrives with highs routinely above 105°F, warping PVC and wood, cracking powder coating, and cooking the control boards inside automatic gate openers. That moisture-to-heat cycle is punishing, and it’s different from what a homeowner in Clovis or a coastal market deals with. But the most uniquely Selma problem is raisin harvest dust. From mid-August through September, fine particulate blankets the area and infiltrates roller tracks, clogs worm-drive openers, and grinds bearings. During those six weeks, we see more roller and motor failures than during the rest of the year combined. A late-summer cleaning of tracks and rollers is genuinely good preventive money for Selma homeowners.
Our Main Selma Services
Selma homeowners and farm operators call us most often for repairs to gates that won’t open or close, and for full installations when the old gate has finally given out. Each service has its own Selma page, linked below.
Gate Repair in Selma
Repair work in Selma usually means one of three things: a sagging gate that scrapes the ground, a latch that won’t catch, or hinges that have pulled loose over years of use. On the agricultural edges of town, we’re also repacking wheel bearings on tube-steel farm slide gates and replacing snapped hinges on vineyard swing gates. The fog season brings us swollen wood gates; the summer brings warped steel and binding. Whatever the failure, you’ll get a written price before any work starts. Gate Repair in Selma
Gate Installation in Selma
New gate installations here vary more than in most towns. Residential jobs are typically steel or aluminum swing gates on older block-wall or chain-link perimeters, sometimes replacing a gate that has rusted through at the hinge or sagged beyond repair. Agricultural jobs outside Selma’s city limits are heavier: tube-steel gates rated for farm traffic, with hinge hardware and post anchoring sized for constant use. We measure, quote, and schedule these rather than rushing them, because a good Selma installation has to survive fog-season moisture and triple-digit summers. Gate Installation in Selma
Electric Gate Repair in Selma
Electric gate repair in Selma has one seasonal enemy above all: raisin harvest dust. The fine abrasive that blankets the area from mid-August through September is the single biggest killer of automatic gate openers here. It clogs worm drives, scores rollers, and overwhelms limit switches. We also see tule-fog corrosion in control boards and wiring connections. Our technicians are factory-trained on the brands Selma families actually run, including LiftMaster, FAAC, BFT, and Linear, so the right fix happens on the first visit. Electric Gate Repair in Selma
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Selma
We’re factory-trained on the equipment Selma homeowners and farm operators actually use: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common parts on the truck for Linear, Viking, and Ghost Controls openers, which helps us handle most repairs in a single visit. See our brands page for the full list.
Pricing for Gate Company in Selma, TX
| Service | Typical range in Selma |
|---|---|
| Gate latch replacement | $120-$280 |
| Hinge replacement (steel gate) | $180-$380 |
| Sagging gate realignment | $150-$320 |
| Weld repair, steel gate | $90-$250 per weld point |
| Post repair or reinforcement | $300-$750 |
| Roller and track replacement | $250-$600 |
| Electric opener troubleshooting | $95-$250 service call, applied to repair |
| Control board replacement | $350-$900 |
| Worm-drive opener repair | $200-$550 |
| Full residential gate installation | $1,200-$4,500+ |
In Selma, the factors that push a price upward tend to be harvest-dust damage inside the opener, rust deep in the hinge posts from fog-season moisture, or a gate so far out of square that the frame needs realignment, not just a latch swap. You’ll always see the exact number in writing before any work starts. No surprises, no pressure.
Neighborhoods We Serve in Selma
We work across Selma’s residential core and the agricultural parcels on its edges. Response times for most repair calls in Selma are same-day or next-day depending on the season. We serve the following areas regularly:
- Central Selma, including the older ranch-home neighborhoods near downtown
- Southeast Selma and the 1970s-80s tract-home subdivisions
- West Selma, where residential lots back up against farmland
- North Selma and the parcels along the city’s edge toward Fowler
- Unincorporated vineyard and farm parcels surrounding Selma
Service Area – Cities Near Selma
While Selma is our local focus, our service area extends to nearby communities across the San Joaquin Valley and beyond. We serve Houston, TX, San Antonio, FL, Dallas, TX, and Fort Worth, TX. Each location is an independent local business working to the same Cedarwell Care Promise.
Serving Selma, TX - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Selma
Most Selma repair calls are answered the same day or the next day, depending on our schedule and the season. If your gate is stuck open or a hinge has failed, call us and we’ll give you a realistic arrival window, not a vague promise. Every call reaches a live person, any hour.
Radical replacements of an existing gate on an existing fence line typically require no permit, but significant new work, especially a new driveway gate with an automatic opener, may require a permit and a sign-off from the city. We’ll tell you what applies to your specific project before we start. The written quote covers the scope so there are no surprises.
Yes, and it’s the single biggest mechanical killer of openers in Selma. The fine particulate from mid-August through September clogs worm drives, scores rollers, and causes limit switches to fail. Cleaning tracks and rollers at the end of harvest is one of the most effective preventive steps a Selma homeowner can take. We can handle that during a standard service call.
If your gate is sagging, stuck, or simply won’t stay closed, call (626) 649-4572. We’ll give you a straight answer and a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Selma Customers Say
"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick