Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Auburn, CA
Latch & Post Gate Repair is a Cedarwell-family gate specialist serving Auburn, CA. We focus on three things: gate repair, gate installation, and electric gate repair. What makes Auburn work different is the Green River Valley itself – the moisture, the fog, the heavy rain, and the commercial truck yards that run gates through hundreds of cycles a day. If your gate is sagging, stuck, or silent at the keypad, call (626) 649-4572 and a live person will answer.
Why Auburn Homes Are Different
Auburn sits on the valley floor, where annual rainfall climbs past 40 inches and ground fog settles in for months at a time. That persistent moisture gets into hinge pins, latch hardware, and gate frames, and rust is the result. We see it constantly in the 1970s-era neighborhoods around Lea Hill and West Hill, where original steel gate posts have been holding up against wet winters for forty or fifty years. The moisture doesn’t just attack the metal you can see. It works its way into gate operator housings, corrodes control boards, and shorts motors – especially in the lower-lying streets near the Green River’s flood-prone sections. Homes on higher ground in neighboring cities simply don’t face this at the same rate. In Auburn, a gate tech who doesn’t account for valley moisture will misdiagnose the problem on the first visit. We account for it before we even arrive.
Our Main Auburn Services
Most Auburn calls start with one of these three problems: a gate that won’t open, a gate that needs to be replaced, or an electric operator that’s stopped responding. Each service has its own dedicated Auburn page.
Gate Repair in Auburn
A sagging gate in Auburn usually comes down to hinge pins that have rusted through, or a post that’s shifted in the wet valley soil. We realign posts, replace rusted hardware, and rebuild gates that are still structurally sound. The valley’s moisture means we pay close attention to the hardware that gets replaced, choosing materials that hold up to repeated wet seasons. See the full scope at Gate Repair in Auburn.
Gate Installation in Auburn
New gate installations in Auburn need to be built for the valley, not for the brochure. That means pressure-treated posts set below the frost line, rust-resistant hinges, and a frame that won’t swell and bind when the fog sits on it for days. We install gates that work for houses in Lea Hill, West Hill, and the manufactured-home communities throughout the city. Details are on the Gate Installation in Auburn page.
Electric Gate Repair in Auburn
Auburn’s electric gate operators face two enemies: moisture intrusion and, for commercial clients, brutal daily cycle counts. We repair control boards, limit switches, drive gears, and safety edges, and we always check the first failure point for Auburn conditions. Learn what we inspect on the Electric Gate Repair in Auburn page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Auburn
We service Linear, Viking, Ghost Controls, and DoorKing equipment, along with LiftMaster, FAAC, BFT, and Elite. We stock common parts for these brands locally, which shortens turnaround on repairs. See the full list on our brands page.
Pricing for Gate Company in Auburn, CA
| Service | Typical range in Auburn |
|---|---|
| Gate latch replacement | $180-$340 |
| Hinge replacement (set of 2) | $240-$420 |
| Gate post reset or replacement | $450-$850 |
| Gate operator motor swap | $500-$900 |
| Control board replacement | $350-$700 |
| Keypad or remote programming | $120-$200 |
| Safety sensor repair or replacement | $200-$400 |
| New gate installation (single swing) | $1,800-$4,200 |
| New gate installation (double swing) | $3,500-$7,500 |
| New gate installation (slide) | $4,000-$9,000 |
In Auburn, rusted hardware and water-damaged operator components tend to push repairs toward the higher end of these ranges. Whatever the scope, you’ll get a written price before any work begins – no surprises, no pressure.
Neighborhoods We Serve in Auburn
We work across Auburn, from the suburban tract homes of Lea Hill and West Hill to the manufactured-home communities with shared entrance gates that see heavy daily use and deferred maintenance. Response for most Auburn calls is same-day or next-day, depending on parts. That includes:
- Lea Hill
- West Hill
- Downtown Auburn
- Northern Auburn
- Auburn Way corridor
Service Area – Cities Near Auburn
Beyond Auburn, we serve the surrounding communities where valley moisture affects gates the same way. We work in Lincoln, CA, Loomis, CA, Rocklin, CA, and Granite Bay, CA. Call for scheduling and availability in your area.
Serving Auburn, CA - Our Local Coverage Area
We’re based in the Auburn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Auburn
Most Auburn repair calls are scheduled same-day or next-day. A live person answers 24/7 and will give you an honest arrival window based on the day’s schedule. Call (626) 649-4572 to check availability.
Most repairs don’t require a permit. New installations sometimes do, especially in HOA communities with shared entrance gates. We’ll confirm requirements for your specific neighborhood before any work begins, and the written quote covers everything – including permit coordination if needed.
No, but it does mean material choice matters. We quote rust-resistant hardware and sealed operator components on every Auburn job, and we explain the difference instead of just swapping in the same cheap part that failed. That’s what reduces repeat repairs here.
Call Latch & Post Gate Repair in Auburn
If your gate is stuck, sagging, or quiet at the keypad, call (626) 649-4572 for a free estimate. A live person answers around the clock, and you’ll get a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Auburn Customers Say
"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon