Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Auburn
Gate repair in Auburn, CA typically costs $145-$425 for most hinge, latch, and realignment work, with commercial slide gate operator repairs running $380-$1,100 depending on the drive system. Most residential calls are handled same-visit, and we work on Auburn’s industrial corridor daily. Call (626) 649-4572 for an exact written quote before any work starts.
We know Auburn’s gates because we spend our weeks on Auburn Way, up in Lea Hill, and throughout West Hill. The repair needs here aren’t the same as a quiet cul-de-sac in Granite Bay or a newer subdivision in Rocklin. Auburn has working gates: truck court slide gates logging hundreds of cycles a day, shared entrance gates at manufactured-home communities, and older residential gates with rusted posts and obsolete control boards. That’s the work we know.
Why Latch & Post Gate Repair Is Auburn’s Preferred Gate Repair Company
We focus on one trade. Every gate comes down to two parts: the latch that holds it and the post that carries it. We don’t paint fences, hang drywall, or chase general contractor work. That narrow focus means when we show up to an Auburn property, we’ve likely seen the exact failure before, whether it’s a burned limit switch on a DoorKing slide gate operator off West Valley Highway or a sagging hinge post at a manufactured-home community entrance near Lea Hill.
Our technicians are background-checked and uniformed, factory-trained on Linear, Viking, Ghost Controls, and DoorKing equipment. Cody Beckman leads the team, and the standard is the same on every job: a written price before we touch anything, shoe covers and drop cloths inside your home, and a photo of the cleanup before we leave. We answer the phone live, 24 hours a day. Not a callback queue.
Commercial Gate Repair in Auburn
Commercial Gate Repair in Auburn is shaped by the Auburn Way industrial corridor, where distribution centers and truck yards run powered slide gates through hundreds of semis and delivery vehicles every single day. These operators aren’t failing from weather or age. They’re failing because they cycle 10 to 20 times harder than a residential design spec. Burned limit switches, stripped rack-and-pinion drives, and dead control boards are the normal repair order here, not the exception. Commercial slide gate operator repair in Auburn typically runs $380-$1,100, and you’ll see the exact number in writing before any work starts.
High-Cycle Slide Gate Operators
Truck court gates along the Auburn Way corridor run hot. We check limit switches and drive gears first, because that’s what fails first under semi traffic. When a Linear or DoorKing slide operator cycles 300 times a day, the rack and pinion wears flat and the limit switch burns. We stock commercial-grade replacement parts locally for Auburn customers, which means less downtime when a gate is stuck closed against a loading dock.
Warehouse and Distribution Gate Service
Warehouse campuses near the rail yards need gates that move when a truck arrives, every time. We service the operators, photocells, safety loops, and keypads on industrial entrances. If a gate trips its motor repeatedly, the issue is usually a misaligned safety edge or a failing capacitor, not the gate itself. We diagnose that before recommending parts, and we never replace a board that a $40 limit switch would fix.
Iron Gate Repair in Auburn
Iron Gate Repair in Auburn is mostly rust work. The Green River Valley floor holds moisture, fog sits low over the valley, and annual rainfall exceeds 40 inches. That’s a hostile environment for unpainted steel. Hinge pins corrode, latch bolts seize, and post-to-gate welds crack from repeated swelling and contraction. Typical iron gate repair in Auburn runs $165-$390 for hinge replacement or realignment, with weld and rust repair around $200-$500 depending on how much steel needs cutting out.
Rusted Hinge Posts and Seized Latches
Older Auburn homes built into the Lea Hill and West Hill slopes often have iron gates hung on posts that were set before modern drainage was considered. Water pools at the post base, the steel rusts through, and the gate sags toward the latch side. We realign the gate on new heavy-duty hinges, then treat the post to slow further corrosion. Where the post is too far gone, we’ll tell you honestly, because welding a patch onto a rusted-through post isn’t a repair, it’s a delay.
Weld Cracks and Frame Fatigue
Iron gates flex. Over 20 or 30 years, that flex concentrates at the weld joints, especially on long driveway gates with a single center support. Cracks start small and grow until the gate twists. We grind out the failed weld and re-weld the joint, then reinforce the weak point so the same crack doesn’t return. For gates near the Green River’s flood-prone areas, we also check the operator’s buried wire and control board for corrosion while we’re there.
Trusted Brands We Service in Auburn
Our trucks carry parts for the brands Auburn’s homes and businesses actually run: Linear, Viking, Ghost Controls, and DoorKing, plus the broader Cedarwell-supported lineup including LiftMaster, FAAC, BFT, Elite, and Mighty Mule. We see a lot of Legacy-era Linear and DoorKing boards in Auburn’s manufactured-home communities and older commercial lots. Because we stock capacitors, limit switches, and receiver boards for these specific units, most Auburn repairs finish in one visit rather than two.
Common Gate Repair Problems We See in Auburn Homes
- Sagging hinge posts at manufactured-home community entrances. Shared entrance gates in Auburn cycle 150 to 200 times a day, and many have gone years without hinge-post service. The gate drops at the latch side and the motor strains, which accelerates the same failure in the operator.
- Obsolete control boards that can’t accept modern entrapment protection. Older gate systems around Lea Hill and West Hill often run boards that predate current UL 325 safety requirements. These can’t drive modern photocells or safety edges, which limits retrofit options.
- Water-damaged operators near the Green River floodplain. Seasonal high water pushes moisture into buried conduit and operator housings. We open these units to find corroded terminals and shorted control boards that look fine from the outside.
- Rusted hinge hardware on iron gates. Marine moisture and valley fog keep iron gates damp. Hinge pins seize, the gate binds, and eventually the post weld fails under the added torque.
Pricing for Gate Repair in Auburn, CA
Here’s what we charge in Auburn. Standard latch replacement: $145-$225. Hinge replacement or realignment on a residential gate: $165-$340. Iron gate weld and rust repair: $200-$500. Commercial slide gate operator repair: $380-$1,100. The two factors that move the price are gate weight and access, meaning how much steel we’re lifting and whether the operator lives in a flood-prone corner of a warehouse lot or a clean residential panel. Every quote is written and agreed before any work starts. Call (626) 649-4572 for a free estimate.
We told one manufactured-home community off Lea Hill the full story before we touched their gate: the FAAC operator’s limit switch was burned, the rack and pinion was worn flat, and the chain needed tensioning. The repair cost $640, which was less than replacing the operator. We wrote that number down before the work, and it’s what they paid.
We Also Serve Cities Near Auburn
Our Gate Repair team works throughout the Green River Valley and the foothill communities that surround it. You’ll find us in Lincoln, Loomis, Rocklin, and Granite Bay, handling the same gate repair work with the same written-price rule. If you’re in one of those communities, the nearest member of the Cedarwell family covers you. For this page and everything specific to this valley, our Auburn team is your best point of contact.
Serving Auburn, CA - Our Local Coverage Area
We’re based in the Auburn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Auburn
In Auburn, it’s almost always the operator, not the gate itself. Commercial slide gates along the Auburn Way corridor run hundreds of cycles a day, which burns out limit switches and strips rack-and-pinion drives far faster than residential gates ever would. We test the operator’s motor draw and limit switch continuity before touching the gate, so you’re not paying to fix a component that isn’t broken. Call (626) 649-4572 and we’ll diagnose it accurately.
Sometimes, yes. If the existing gate and post are structurally sound, we can often add modern photocells, safety edges, and an updated control board that meets current UL 325 entrapment standards. But if the board is too old to accept the newer safety inputs, or the gate’s framing is too far gone, replacement becomes the cheaper answer than fighting the retrofit. We’ll tell you honestly which is which before quoting any work.
Because the post itself is moving. In Auburn’s clay-heavy valley soils, gate posts set without deep concrete footings slowly lean under the gate’s weight, especially on the wetter, lower-elevation lots near the Green River. That shifts the load onto the hinge side and the gate drops exactly there. We reset the post in a proper footing, or replace it entirely if the steel has rusted through. It’s one of the most common repairs we do in this city.
Yes, we do. Auburn has a high concentration of manufactured-home communities, and the shared entrance gates typically log 150 to 200 cycles a day, far more than a residential driveway gate. We’re familiar with the deferred maintenance patterns these gates show: worn hinge posts, burned limit switches, and control boards that are 15 years old and no longer manufactured. We stock replacement parts so these gates don’t stay stuck open.
Expect moisture in the operator housing and potentially corroded terminals on the control board. Gates near the Green River’s flood-prone sections take seasonal water into the buried conduit, and that water sits against the low-voltage wiring and board connections. The fix is usually replacing the corroded board and sealing the conduit entry points, plus re-siting the operator on a raised pad if the flooding recurs. Call (626) 649-4572 and we’ll take a look before it fails completely.
If your gate is down, sagging, or stuck, call (626) 649-4572. We answer live, any hour, and we’ll get you a written price before any work begins. Same-day visits are usually available for Auburn residential calls, and we’ll set an appointment that respects your family’s time, your kids’ nap schedules, and your floors.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving the Auburn area with the Cedarwell Care Promise: written price before work starts, shoe covers and drop cloths on every visit, and a cleanup photo before we leave.